Complaint
Cell phone Amplifier Description: 1000mW 868Mhz 30dBm WiFi Signal Booster
| Model | SH08Gi1000 |
| Operating Range | 863~870 MHz |
| Channel width | 1~20Mhz |
| Operating Mode | Bi-directional, half-duplex, time division duplex |
| Connector type | To radio SMA female (hole inside). To antenna RP-SMA female (pin inside) . |
| Input power | 0~23 dBm |
| Transmit gain | 24 dB typical |
| Output Power | 1W (30dBm) |
| Receiver Gain | 16 dB typical |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Power supply | 12V/2A DC, 100~240V |
| Operating Temperature | -20°C to + 70°C |
| Operating Humidity | Up to 75% relative humidity |
| LED light | Power status / activity status LED |
| Material | Cast Aluminum |
| Booster Size | 9.7 x 6.4 x 1.7cm |
| Booster Weight | 133g |
1 x SH09Gi1000 WiFi booster
1 x power supply
All specifications of PA can be customized based on customer requirement.
Model: SH09Gi1000
[About Input power of Booster]
(output power of the device = input power of the amplifier),
Sunhans SH09Gi1000 booster input power 0~23dBm(18~19dBm will better),if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know,we will give the suggestion to solove this question according to your actual situation.
[Maximum Output power]
In ideal situation,the max output power can be up to 1W(30dBm).This amplfier will boost the receive and transmit (RX and TX) power of your wireless device to about 30dBm.
After connected with Booster,the output power at the antenna end is transmit gain of booster + Output power of the device - Signal loss of Cable/Connector.
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
