Ventilation System Tunnel Door for Chicken House

Min.Order: 1
Product origin: Qingdao, Shandong, China
Infringement complaint: complaintComplaint
US$ 50 ~ 160

Description
Introduction of diversion plate:

The tunnel ventilation guide plate is installed on the inner side of the wet curtain air inlet, which is closed for heat preservation in the cold season, and used to adjust the size of the air inlet and the flow direction of fresh air in the longitudinal ventilation season.

Control the direction of air flow, swirl in air flow, better mixing of air;
 
 
Eliminate the ventilation dead Angle at the air inlet of the wet curtain in longitudinal ventilation;
 
The thermal insulation performance is more than 8 times of the ordinary shutter under the closed state, which reduces the heating cost by about 15% than the ordinary shutter, and the temperature in the room is balanced;
 

Product features:
 
The guide plate produced by our company is composed of glass steel plate + thermal core material + light insulation layer, which can not only prevent energy loss, but also effectively light insulation.


At present, the imitation flow guide plate on the market has no light, or the composite aluminum film is used to block light. This aluminum film is temporarily effective, but after several years of use, there will be oxidation shedding, thermal insulation performance decline, and light transmission phenomenon. And the guide plate sandwich layer produced by our company is covered with aluminum foil, aluminum foil oxidation film will prevent continued oxidation, not only increase the insulation, but also 100% light resistance.


Draw-rope tunnel ventilation and thermal insulation door


Product Introduction

Suitable for most chicken houses (cage raising/flat raising).

Material: frame (275g zinc layer square tube)/FRP square tube, FRP insulation door, Nylon rope, steel wire rope, fixed pulley, electric reducer/manual winch, weight distribution, etc.

Advantages: low installation cost, stable operation, easy operation and maintenance.


Rack type downturn ventilation tunnel door


Product Introduction

Suitable for large multi-layer, large amount of feeding, large area ventilation, high degree of automation of the chicken house.

Materials: FRP insulation door, rack, galvanized round pipe, electric reducer, etc.

Advantages: does not occupy the room space, thermal insulation door synchronous opening and closing Angle control precision, accurate temperature regulation of the room, feeding efficient. In the wet curtain maintenance, do not need to enter the house, sanitation and epidemic prevention is better.


Fan insulation board/steel livestock, poultry house door
 

Product Introduction

Fan insulation board

Suitable for most northern piggery; Function: to close the fan hole without opening in winter heat preservation;

Advantages: when the fan in the north is not in operation in winter, the product can have the effect of sealing and heat preservation.


Product Introduction

The door frame and the edge of the door plate are made of galvanized steel plate/stainless steel plate, which are bent and formed with good compressive deformation resistance, plastic spraying and corrosion resistance.

The door panel is made of spraying steel plate + flame retardant XPS foam composite board material, which makes the door panel both beautiful and durable and ensures good thermal insulation effect.

The use of EPDM soft and hard co-extruded sealing strip, so that the door panel and the door frame tightly, close insulation performance is excellent, the raw material is made of automotive grade sealing strip material production, quality assurance, aging resistance, corrosion resistance.

 
project case
 
China Chia Tai 30 million laying hens project: Rack type downturn ventilation guide plate, high degree of automation, multi-layer dynamic temperature control, high ventilation efficiency, does not occupy the house space, convenient for keepers to inspect and arrange

About us:
Qingdao Farm Lyric Agri-tech Co., Ltd. is located in Qingdao, a port city in Shandong Province, China. Our factory is 40 kilometers away from Qingdao port and 30 kilometers away from Qingdao Jiaozhou International Airport. The company is mainly engaged in the research and development, design, production, installation and service of livestock and poultry breeding products. Automatic feeding system, automatic drinking water system, ventilation and cooling system, environmental control system for main pigs, cattle, sheep, chickens and geese. In addition, the company also produces steel structure products, mainly used in the engineering design and construction of modern breeding farm.
We have a first-class RESEARCH and development team, first-class process machines and injection workshop, all research and development, injection are completed in our own workshop.
In this case, we can control the quality ourselves and provide custom designs.
As a result, Farm Lyric has been well received by customers around the world.
First-class service, first-class products, first-class management, first-class engineering is our permanent purpose.
Our advantages:
1. Your enquiry will be answered within 24 hours
2. One-stop purchasing experience
3. Customizable design
4. Our professional team will provide you with the most suitable farm solutions and the shortest delivery time.
5. Professional quality control system and after-sales service system
6. Service life of equipment: more than 10 years
FAQ:
Q1. What are the packing terms?
A: Standard export packing or according to your requirements.
Q2. What are your terms of payment?
A: 30% T/T as deposit, 70% before delivery. During the preparation period, we will report the progress of preparation to you every day, and send progress photos.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. What are your delivery times?
A: For regular products, it will take 10 to 15 days after receiving your advance payment. The exact delivery time depends on the goods and quantity you order.
Q5. Can you produce according to the sample?
A: Yes, we can produce according to your samples or technical drawings. Of course, the cost of making molds and fixtures is negotiated by both parties.
Q6. What is your sample policy?
A: We can provide regular samples, but the customer has to pay for the freight. The cost of expensive samples should be shared by both parties.
Q7. Do you test all goods before delivery?
A: Yes, we do 100% test before the goods leave the factory.
Q8: How do you maintain a long-term good relationship with our business?
A: 1. We will provide the most competitive price and quality to ensure our benefits to you;
     2. No matter where you come from, we are all friends and family. We will do our best to help you.

Product Tag:
Related categories:
Scroll to Top