Complaint
Plate heat exchanger is an ideal equipment for heat exchange between liquid and steam. The utility model has the advantages of high heat exchange efficiency, small heat loss, compact and light structure, small floor area, wide application, long service life, etc. Under the same pressure loss, the heat transfer coefficient is 3-5 times higher than that of the tube heat exchanger, the floor area is one third of the tube heat exchanger, and the heat recovery rate can be as high as 90%.
Type | Plate Type |
Plate Material | 304, 304L, 316, 316L, 254SMO, Duplex steel, Titanium, C-276 etc. |
Nozzle dia. | DN32~DN1000mm |
Plate pair pattern | Corrugated plate |
Design pressure | Vacuum ~ 36 Bar |
Plate thickness | 0.4~0.8 mm |
Gasket materials | EPDM, NBR, VITON, PTFE CUSHION |
Max. surface area | 4000m2 |
Maximum design pressure | ≤10MPa |
Maximum design temp | 850ºC |
Maximum shell diameter | 4600mm |
Tube specification | φ19-φ325mm |
Tube length | 1000-16000mm |
Plate Material Characteristics | |
Material | Application |
SS304 | Drink water, None Corrosive Liquid, Oils, Fresh Steam etc. |
SS316L | Well water, river water, closed circulating water and other water with complex components, Dilute sulfuric acid with temperature ≤ 50 ºC and concentration ≤ 10% etc. |
Titanium | Liquid that contains chlorine iron, Sea water etc. |
Titanium Palladium Alloy | Higher temperature and corrosion resistance than titanium. |
Nickel 20 | It is mainly used for caustic solution (NaOH, Koh, etc.) with high concentration (50% ~ 70%) and high temperature (boiling point). |
Hastelloy C-276 | It has good corrosion resistance, almost not affected by Cl -, excellent corrosion resistance to various concentrations of sulfuric acid, and is one of the few materials that can be used in hot concentrated sulfuric acid, widely used in organic acids (such as formic acid, acetic acid), high temperature HF acid and a certain concentration of hydrochloric acid (< 40%), phosphoric acid (< 50%); chloride, fluoride. |
| Gasket Material Charactristics | ||
| Material | Working Temperature | Working Enviroment |
| NBR | -25~120ºC | Alkane, olefin and other non-polar media, all kinds of mineral oil, animal and vegetable oil, hot water, salt water, etc. |
| EPDM | -50~170ºC | Superheated water, steam, atmospheric ozone, non petroleum based lubricating oil, weak acid, weak base, ketone alcohol, etc |
| HNBR | -25~150ºC | Crude oil, sulfur-containing oil and organic sulfur compounds, some heat transfer oil, new refrigerant 134a, etc |
| Viton | -25~150ºC | Nonpolar mineral oil, high temperature water vapor, sulfuric acid, chlorine water, phosphate with concentration above 98% |
You just need to provide the following information, then we will do the rest things for you:
1. Your application.
2. Hot side & cold side inlet/outlet temperaure range value.
3. Hot side & cold side inlet/outlet flow rate range value.
4. Medium name.
Our company has more than 150 models of plates including different corrugation shapes, angles and corrugation depth of plates, and every plate has corresponding mould. The materials of the plates include SS304, SS316L, titanium, Hastelloy Alloy, NI and 254MO and so on. The thickness of the plates is 0.5mm, 0.6mm and 0.7mm. We have rigorous pressing plate technologies. The tolerance of shaped plates is less than 0.3mm, the burring height is less than 0.2mm when blanking, and we will carry on the quality test of the shaped plates with magnifying glass and diagnostic machine. We have top-ranking products to satisfy our customers and first-rate service to return our customers.
1.Are you a manufacturer or a trader?
We're a manufacturer with more than years of professional production experience.
