Complaint
In the semi-finished products, finished products in the production process of power transformer, the transformer operation before the installation of the new transformer operation and power system according to the preventive test rules of the State Ministry of electric power, requirements for the transformer turns ratio or regular voltage ratio test. The traditional variable ratio bridge operation is tedious, the reading number is not intuitive, and the necessary conversion is required. The test results are only the data of a phase change ratio. The variable ratio tester overcomes the shortcomings of the traditional variable ratio bridge test. The screen uses a three phase variable ratio test at once, and the test speed is fast and the accuracy is high. The field test time is greatly saved, which brings high efficiency for the customer's test.
PRODUCT INFORMATION | |||
Product Name | Transformer Turns Ratio Tester | ||
Model Number | VS-6628 | Test Range | 0.9 ~ 10000 |
Accuracy | 0.1% | Certificates | CE; EMC; LVD; ISO; |
Typical Application | Tests turns ratio, polarity, vector group and phase deviation. | ||
Aids in Identifying | * Shorted coils * Open circuits * Incorrect connections * Internal faults or tap-changer defects in step regulators as well as in transformers | ||
Dimensions | 260mm * 200mm* 160mm | Weight | 3.5kg |
1. Automatically measure the wiring group.
2. Automatic group conversion, which can directly measure the transformation ratio of single-phase, three-phase transformers and transformers.
3. Automatically switch the phase sequence.
4. Automatically switch the range.
5, automatic calibration table.
6. After inputting the standard transformation ratio, the relative error can be automatically calculated.
7. After one measurement is completed, the test voltage is automatically cut off.
8. The measurement results are automatically saved, the test data can be printed out, and 20 historical measurement data can be stored.
