Model | Specification | Color | Characteristic | Cure Time(@ 25°C) | Viscosity (mPa.s) |
510 | 50ml 300ml | Pink | high temperature resistance | 72 hr | 200000/750000 |
515 | 50ml 300ml | Purple | general use | 24 hr | 150000/375000 |
518 | 50ml 300ml | Red | aluminium surface seal | 24 hr | 500000/1000000 |
574 | 50ml 300ml | Orange | fast cure | 12 hr | 20000/40000 |
510 flange sealant is a high temperature(+204°C) and chemical resistant gasket product that is ideal for use on rigid flanges. It cures when confined in the absence of air between close-fitting metal surfaces.
515 flange sealant is a medium strength (6 N/mm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.
518 flange sealant is a medium-strength, general purpose gasketing product with excellent contamination tolerance.
574 flange sealant seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature HiGlue 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance. 518 Flange Sealant Technical Information:Chemical Compound Dimethacrylateester
Color Red gel-likematerial
Curing Method Anaerobic
Full Cure Time @ Temp. 24 H @ 77°f
Gap Fill [Max] 0.25mm
Odor/Scent Mild
Packing Type Tube/ Bucket
Physical Form Paste
Resistance Brake Fluid; Ethanol; Motor Oil
Viscosity 500,000/1000,000 mPa.sShear Strength(psi) 1100
Temp. Range -65 °f~+300°f
518 Flange Sealant Features:
1. Easy to automate 2. Reduces process costs - eliminates manual assembly of conventional gaskets
3. For active and inactive rigid metal flanges
4. Cures through minor surface contamination
5. Adapts to flange surface irregularities and gaps up to 0.25 mm
6. Gel-type consistency
7. Seals instantly against low pressure
8. Reduces inventory costs - no need for large inventory of cut gaskets
9. Resists high pressure when fully cured
10. No compression set or misaligned gaskets