Complaint
Series YCW disk type tailing recovery machine is one of our new developed products on the basis of the advanced experience of foreign countries. This product is very suitable for the efficient recovery and utilization of the magnetic materials from waste slurries. Its magnetic system is made up of a group of bare-mounted magnets, which are arranged according to a certain gap. The magnetic system has a direct effect on the magnetic materials. Under a strong magnetic field intensity and a large gradient effect, the recovery rate can be as high as 85%-95%. In particular, with the V-shaped scraper and their self-gravity, the magnetic materials can be discharged without water or less water. This machine is widely used in metallurgy, mining, nonferrous metals, gold, building materials, electricity, coal preparation plants, iron and steel plants (steel slag), sintering plants and etc.
Advantages
1. Magnetic field intensity and layout: high magnetic field intensity, small magnetic disk space, magnetic field between disk and disk.
2. Unloading: use V type scraper to force discharging, discharging clean and thoroughly.
3. Large amount of processing capacity, this machine is aimed at the high flow of flotation tailings and low content of magnetic medium powder, which is a few times or even dozens of times that of the existing drum type magnetic separator.
4. The recovery rate is high, because the magnetic field intensity of this machine is large. All materials that pass through the disk are affected by the magnetic field. The magnetic material is fully recovered and the recovery rate is high.
5. Water conservation. Due to the unique magnetic distribution of magnetic fields, the magnetic material contains a lot of water. The magnetic material being unloaded is flowing, which can basically be free of adding water or adding a small amount of water.
6. The efficiency is high, the machine has a large amount of processing, and it has a small area of land, and the output efficiency is high. The annual output benefit is more than ten times that of the equipment investment
Technical Data
| NO. | Model | Disposal of slurry capacity (m³/h) | Output of ore (t/h) | Width of trough (mm) | Magnetic induction density (Mt) | Diameter of disk (mm) | Quantity of disks (PCS) | Driving Power (kw) | Weigh (kg) | Length (mm) | Height (mm) |
| 1 | YCW-80-4 | 50-100 | 0.5-1 | 400 | 170-400 | Φ800 | 4 | 2.2 | 720 | 2000 | 1050 |
| 2 | YCW-80-6 | 100-200 | 1-2 | 600 | 6 | 3.0 | 960 | 2100 | 1050 | ||
| 3 | YCW-10-4 | 200-300 | 2-4 | 400 | Φ1000 | 4 | 3.0 | 1100 | 2300 | 1250 | |
| 4 | YCW-10-6 | 400-500 | 3-5 | 600 | 6 | 3.0 | 1500 | 2300 | 1250 | ||
| 5 | YCW-12-8 | 600-700 | 5-8 | 790 | Φ1200 | 8 | 4.0 | 1800 | 2700 | 1460 | |
| 6 | YCW-12-10 | 700-850 | 7-10 | 980 | 10 | 4.0 | 2100 | 2700 | 1460 | ||
| 7 | YCW-15-12 | 1000-1200 | 11-16 | 1170 | Φ1500 | 12 | 7.5 | 3200 | 3050 | 1760 | |
| 8 | YCW-15-14 | 1200-1400 | 13-18 | 1360 | 14 | 7.5 | 3600 | 3050 | 1760 | ||
| 9 | YCW-20-12 | 1500-1800 | 14-19 | 1170 | Φ2000 | 12 | 11.0 | 3800 | 3150 | 2260 | |
| 10 | YCW-20-14 | 2000-2400 | 17-22 | 1360 | 14 | 11.0 | 4200 | 3150 | 2260 |
Q: Are you a factory ?
A:Yes,we are factory, which was established in 2003.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 15 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment.
Q:Guarantee period:
A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?
A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price.
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.
Welcome Inquiry & we will reply to you within 24 hours.
