Preface
Thank you for choosing the XLD-T100S Thermostatic Magnetic Stirrer.in order to obtain a better experience, please read this instruction Manual carefully and abideby the safe operation specificationslPlease keep this Instruction Manual in a safe place for referencel
Precautions
OPlease abide by relevant regulations such as safety regulations, personal safety regulationsand accident prevention requlations.
Please insert the power plug fully into the power socket. The instrument must be groundedreliably. Please do not use a power supply other than the specified one.Do not plug or unplug the pawer plug with wet hands.The level of the liquid should be 70% of the height of the container.The stirring speed should not be too fast to prevent the instrument from being damaged byiquld splashing.
The speed adjustment should be gradually adjusted from low speed to high speed. It is notallowed to start directly from the high gear, so as to avoid the stirring bar being out of synchronization and causing beating.OWhen the stirring bar is found to be beating or not stirring, please cut off the power supply tocheck whether the bottom of the beaker is flat and the position is correct. Meanwhile, pleasetest whether the current voltage is between 110V-220V+10%. Otherwise, it will appear theabove situation.
Try not to use it for a long time at one time, and use it interrittently to prolong its life.>lf you find leakage after long-term use, please check whether the power adapter is damagedbecause the voltage is directly input by the adapter, Or, check whether the line touches the lineand the insulating tube falls off due to the collision, lt is absolutely forbidden to dismmantle andrepair by yourself if you do not understand the principles of electrical engineering!ln any of the following situations, the power plug of the instrument must be unplugged:1 The instrument is in an abnormmal state,2) When the fuse is being replaced;3) When the instrument fails and cannot be used normnally;.) When the instrument is out of use for a long time and the power plug is full of dust?5 When the instrument is being moved.
This series is magnetic stirrer. A non-ferrous container should be used.Place the container with the liquid and stirring bar in the middle of the stirrer. Slowly rotatethe speed control knob to the desired stirring speed to prevent the stirring bar from deviating orstopping stirring. The shape and size of the stirring bar should match the volume of the container and of liquor.
Please cut off the power and clean the instrument after use.Olf you find that the instrument has peculiar smell or abnormal noise during use, you shouldcut off the power immediately, and then contact our After-sales Department as soon as possible
Please take appropnate precawhen handling toxic and volatile media.ODo not disassemble and adjust the parts of the instrument at will. When the spare parts aredamaged,please only use the onginal spare parts for replacement.When the instrument fails, you should cut off the power supply in time. Please contact ourcompany for maintenance quidance or return for overhaul at the first time.