HDPE Resin High Density Polyethylene Virgin

Min.Order: 1

Product origin: Dongguan, Guangdong, China

Infringement complaint:

Complaint

US$ 1000

Description

Packaging & Delivery

Package size per unit product

25.00cm * 20.00cm * 50.00cm

Gross weight per unit product

25.000kg

HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion

Performance of the project		Test condition [condition]	The test method	The test data	The data unit
Basic performance	Density mass index		GB/T 1033	0.948±0.002	g/cm3
	Density test results		GB/T 1033	0.948	g/cm4
	Melt flow rate mass index	190ºC/5.0kg	GB/T 3682	0.23±0.03	g/10min
	Melt flow rate test results		GB/T 3682	0.25	g/10min
	Melt flow rate mass index	190ºC/21.6kg	GB/T 3682	6.2±1.5	g/10min
	Melt flow rate test results		GB/T 3682	6.4	g/10min
Mechanical properties of	Tensile yield strength quality index		GB/T 1040	≥23	MPa
	Test results of tensile yield strength		GB/T 1040	27.6	MPa
	Elongation at break quality index		GB/T 1040	≥600	%
	Test results of elongation at break		GB/T 1040	804	%
	Quality index of impact strength of simply supported beam		GB/T 1043	≥25	KJ/m2
	Test results of impact strength of simply supported beam		GB/T 1043	26.7	KJ/m2
Other properties	Volatile matter quality index		GB/T 15658 1	≤350	mg/kg
Other properties	Volatile test results		GB/T 15658 1	Did not check out	mg/kg
Biochemical property	Cleanliness (color granule) quality index		SH/T 1541	≤20	grain/kg
	Cleanliness (color particle) test results		SH/T 1541	0	grain/kg
	Cleanliness (impurities) quality index		SH/T 1541	≤60	grain/kg
	Cleanliness (impurities) test results		SH/T 1541	0	grain/kg

1.Fiber ( Carpet, Textils, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)

25kg/ carton or 25kg/bag, or per your requirement

25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container

Forward

Related products