Metallic Processing Machinery for Coil Feed Line Reel Stand

·Decoiler part

1. Decoiler tile can be adjusted arbitrarily according to the material's inner diameter, easy to put the coil into the decompiler.

2. The frame covers a small area, with a simple structure, is easy to install, running smoothly without jitter.

3. A shape rack (retainer) adopts flat bending, and blackening treatment after welding.

·Main shaft and tile

1. The tiles are made of A3 material, flashing process after blanking, then milling the tile's inclined angle, then bending, drilling, and milling.

2. All nuts which needed to fix each part adopt non-slip nuts, to prevent them from falling off during operation, and avoid damaging the machine or injuring people.

3. Spindle screw and screw sleeve are made of fine machining to ensure the smoothness of adjusting inner and outer diameter and avoid unnecessary downtime.

·Electric control box

11, Adopt silver alloy relay, full copper coil, flame retardant safety base, long-lasting and durable.

2. The switch adopts sliding contact, with a self-cleaning function, normally open and normally closed contact adopts a separate bonding structure, can work with different poles, is equipped with anti-rotation positioning, and stop loose mounting gasket.

3. Adopt a self-duplex flat button, the force is light, the key range is moderate, and the building block type combination structure. The contact is made up of keto-base composite points with strong conductivity and a large current, with a life span of up to 1 million times.

 4. The electric box is equipped with forward and reversal switches, and can be used for uncoiling and recoiling material, greatly increasing the practicality.

·Power part

1. Adopt model 60 worm gear vertical reducer, use the speed converter of gear, reduce the rotation number of the motor to desired rotation number, and get the mechanism with larger torque.

2. Adopt vertical motor, low vibration, low noise, stator rotor part adopt pure copper coil, life is 10 times of ordinary coil, both ends are equipped with ball bearing, low friction, low temperature.
 

·The base part

1. This equipment adopts a simple design to improve the utilization rate of the site and save cost, with high-cost performance.

2. The frame is a separate assembly design, and all parts of the frame are fixed with hexagon screws. The overall structure is simple, it is convenient for general technical workers to assemble and replace, can greatly reduce the maintenance cost in the later stage.

3. The base of the frame is made of casting material, which can reduce cracks during production, and the base can be fixed with anchor screws to increase the stability of the whole machine and improve the accuracy.