Wire rod, is a commonly used name in construction engineering construction, indicating the diameter of the steel bar is less than 10 mm. Because the steel bar below 10 mm is easy to bend, in order to reduce the length before transportation, the manufacturer will roll the very long steel bar into a circle of a circle, in the construction site of the steel bar referred to as wire rod.
Steel Grade | Q195/Q235/SAE1006/SAE1008 |
Standard | AISI, ASTM, BS, DIN, GB, JIS.ect |
Type | Loop Tie Wire |
Diameter | 2mm 3mm 4mm 5mm 6mm 8mm 10mm |
Zinc Coating | General is 40g/sqm-60g/sqm Our factory is 12g/sqm-240g/sqm |
Delivery Time | 15-21 days |
Usage | Construction Materilals |
Chemical composition | ||||||
Steel
grade | C (%)
max | Mn (%)
max | S (%)
max | P (%)
max | Si (%)
max | Typical uses |
SAE 1006 | 0.08 | 0.30 - 0.40 | 0.025 | 0.020 | 0.08 | Black and galvanized wires, small nails |
SAE 1008 | 0.09 | 0.30 - 0.50 | 0.300 | 0.020 | 0.10 | Black and galvanized wires, nails, galvanized fencing mesh |
SAE 1010 | 0.10 | 0.40 - 0.60 | 0.400 | 0.025 | 0.15 | Concrete reinforcing wire mesh, nails, galvanized fencing mesh |
Electrodes | 0.09 | 0.40 - 0.60 | 0.025 | 0.020 | 0.05 | Coated welding electrodes
(according to DIN 17145 / USD7) |
S235JR | 0.12 | 0.40 - 0.65 | 0.040 | 0.025 | 0.20 | Concrete reinforcing wire mesh |
Adequate supply of goods in the warehouse
1. The company has stable and good supply channels with sufficient supply sources
2. Complete goods, quality assurance, and delivery speed
3. Support wholesale and retail
According to the type of material, Steel wire rods are manufactured in different grades.
Carbon steel wire rod is the most common with no minimum content specified or required of molybdenum (Mo), aluminum (Al), chromium (Cr), niobium (Nb), cobalt (Co), nickel (Ni), tungsten (W), titanium (Ti), zirconium (Zr), vanadium (V), or any other element required for a particular effect of alloying. Carbon steel wire rods contain copper content, generally up to 0.40%. Moreover, the manganese content will not exceed the level of 1.65% and 0.60% will be the maximum level of silicon.
These steel wire rods are supplied in the following grades:
Besides the grades, there are other features to be guaranteed for carbon steel wire rods while going through the various processes to be with no defects as well as have the right performance according to the destined application.
We have a strict quality system, the raw materials of each order will be tested before production, and a rolling mill test certificate will be provided to customersThe most common features are:
Other qualities are:
There is a variety of applications for steel wire rod, such as:
For example, in the manufacture of reinforcement cages; square, round, or rectangular-shaped assembly clamps are made from wire rod. With the help of reinforcing cages, monolithic columns, girders, belts, cross-tops, and lintel strip foundations are reinforced.
In addition to the use of wire rod in reinforcing cages, it is also used in the manufacture of welded reinforcing mesh for monolithic structures, such as concrete floors and screeds.
Steel rods are also used when laying bearing walls or walls of brick, cinder, foam, or gas block. Depending on the concrete used for masonry, steel wire is put into each 2nd-4th layer of mortar, thereby enhancing the overall strength of the masonry. Thus, the rod performs the role of reinforcing the structure.
Apart from that, wire rod is used in the production of electrodes and wires for welding, as well as the manufacture of telegraph wires, ropes, and cables. For such applications, aluminum and copper rod fits best. Most often, such wire is used in power supply systems. In order for rod not to affect the operation of these systems, it must be plastic and well deformable. These characteristics play a key role when choosing the right diameter of the rod.
1.Every cartons loaded with good shoring and strengthening in container well to make it safe arrive at destination port.
2.Take container loading pictures and seal the container.
3.Transportation speed is quick. And keep customer eachstep informed.
Shandong Zhongtuo New Material Group Co., Ltd. has a large inventory and complete material specifications. In case of special specifications and materials, we can also order production in time. Since its establishment, the company has always adhered to the business policy of "survive by quality, develop by credit". Welcome new and old customers to inquire.
Our Advantage:High Quality Products to win the market, Competitive Price to attract customers, Excellent Service to gain reputation, Excellent Service to gain reputation.
Shandong Zhongtuo New Material Group Co., Ltd. is a large steel enterprise group with an annual steel export volume exceeding 15 million tons. Located in Shandong Province, with convenient transportation and air transportation, it is adjacent to Tianjin Port to the north, Qingdao Port to the east, and Shanghai Port to the south. The main products include stainless steel plates/coils/pipes, carbon steel plates/coils/pipes, and galvanized steel coils. There are also sets of structural steel and accessories such as galvanized sheet, tinplate, round steel, threaded steel, roof panel, spring steel strip, PPGI, PPGL, etc.