Description
Medical Equipment Neonate Baby Care Moveable Infant IncubatorModel:NI-3000Product Description Product feature:
1.Servo Control Mode: air temperature, skintemperature, display humidity;
2.Parameter Displaying: set temperature,air temperature, skin temperature, internal humidity, heat power rate;
3.Audible & Visual Alarms: powerfailure, sensor failure, higher & lower temp, air & skin temperature override, fan failure, system failure;
>37ºC Preset Mode: power failure reset memory, alarm silence, keypad lock, self-testfunction;
4.Hood with dual slope; 6 hand-ports;
5.RS-232 Output Connector (use for networksystem);
6.IV poles;
7.Protective guard rail;
8.Storage cabinets.
Specifications of hoodMattress to Hood: 450 mm
Observation side of hood: Two incline
Operate port: 6 (2 Iris ports)
Tubing grommets: 4
Front access panel: 826×310 mm
Mattress Tray Size: 630×360 mm
Infant bed tilt adjusting ±10° step-lessTechnical Specifications Power requirement ≤400VA
Temperature control mode:
Air and skin servo control
Air Temp Control Range: 20.0ºC-37.0ºC
Temperature override mode to: 37.1ºC-39.0ºC
Skin Temp Control Range: 20.0ºC-37.0ºC
Temperature override mode to: 37.1ºC-38.0ºC
Skin temp sensor accuracy: ≤0.3ºC
Humidity display range: 5%-99%
Temperature fluctuation: ≤0.5ºC
Mattress temperature uniformity: ≤0.8ºC
Temperature rise time: ≤45 min
Noise level within hood environment: ≤55dBAlarmsPower failure alarm
Fan failure alarm
Sensor failure alarm
High air temperature alarm: +3.0ºC
Low air temperature alarm: -3.0ºC
High skin temperature alarm: +1.0ºC
Low skin temperature alarm: -1.0ºC
Over air temperature alarm: ≤38.0ºC; ≤40.0ºC
Over skin temperature alarm: ≤38.0ºC; ≤39.0ºC
System failure alarm
Alarm silence functionOperational condition Environment temperature: +20ºC~+30ºCEnvironment relative humidity: 30%~75%Environment air velocity of flow: <0.3m/sOthers Mattress tray Max. load 5kg
Transfusion pole Max. load 2kg
Cabinet Max. load 6kgFAQQ 1: Your company is manufacturer or trader?A 1:We are one industry & Trade company. We have own investment in factory of xray machine, to invest in some good factory to strengh our own product supply chain is our long term strategy. Q 2: What certificate do you have for products you supply?A 2: All our products have ISO, 90% have CE, some FDAQ 3: What is your Warranty for medical equipment?A 3: Basically 14months after goods leave China. Our own manufactured Xray 24months warranty.Q 4: What is your acceptable payment way?A 4: T/T in advance, WEST UNION, MONEYGRAM, and L/C if needed. Q 5:Can you do OEM for us?A 5: Yes, we can. Some products with low value need quantity to do OEM.Q 6: What is your MOQ?A 6: For common equipment, 1pcs is MOQ. For consumables, we can discuss.
Complaint
