Factory Automatic Wire Mesh Weaving Fencing Making Chain Link Fence Machine
Working Principle
1. The wire is taken in from the pay-off stand and passed through the dies where the diamond size takes place.Different gap sized.
2. After passing from the die, the diamond pattern wire is automatically thrown on the winding
shaft in the stitching process.
3. Once the stitching is complete, the woven is manually glided down to enable the next switch to take place.
4. The chain link is automatically wound to form rolls when the desired length is setted.
5. One side or both side of the end of net hole is twisted or with burr in edge.
6. Use rolling side machine to make it into rolls.
Advantage
1. The machine is controlled by PLC automatic controller, so only one person is needed to
operate it.
2. One wire feeding which can reduce the breakdowns.
3. Wide width weaving scope: 1.3-4.5mm.
4. The high productivity for this machine can be 100m²/h.
5. The width scope can be 600-4000mm, and we can customize it for you.
6. The mesh size can be 25x25-120x120mm, and can be changed according to the mould.
Usage
The product is wildly used as prevent for road, railway, airport, residence district, seaport,
garden, feeding and husbandry.
Main Parameter:
| Wire Diameter | 1.3-4.5mm | Mesh Size | 25x25-120x120mm |
| Width | 600-4000mm | Production | 60-120 m²/h |
| Voltage | 380V 415V 50HZ 3phase | Motor | 3.8KWX1 servo motor,1.5KWX3,0.75KWX3 |
| Exterior size | 3800x2400x1500mm | Weight | 2000kgs |
Double Wire Type
Single Wire Type
More details
FAQ
Complaint
