Complaint
1,Superior performance: Equipped with a reliable and high-torque diesel engine from the cloud internal series. Matched with a heavy-duty mining-specific gearbox with a large speed ratio range. The two-stage reduction and large speed ratio drive axle increases torque, resulting in over 30% more driving torque than comparable road vehicles. This allows for smooth starting under heavy loads, large carrying capacity, strong climbing ability, and the ability to climb slopes of up to 25° or more.
2,Strong carrying capacity: The vehicle frame is made of a closed-section box-shaped steel frame made of special steel plates, with a sturdy and reliable structure, high torsional and impact strength, and high rigidity, ensuring a long service life. The specially designed suspension system and large-diameter mining-specific tires ensure strong load-bearing capacity.
3,High loading and unloading efficiency: The bottom of the 10mm and the edges of the 5mm thick groove steel are fully welded and reinforced, forming a mining-specific U-shaped cargo box with thick materials, strong impact resistance and wear resistance. The 1.7m internal width of the cargo box is convenient for multi-directional loading by equipment such as shovels and loaders, greatly reducing loading time. Equipped with a 1100mm long-stroke three-section lifting oil cylinder and a high-flow gear pump, the lifting time is short, and unloading is convenient and fast, improving work efficiency.
4,Reliable manufacturing performance: Front and rear equipped with widened brake friction pads and dual-circuit air brakes, ensuring the possibility of sustained braking under heavy loads downhill. The spring energy storage air brake ensures the safety of the mining vehicle during braking under complex conditions.
5,Good mobility and off-road capability: The 2-axle structure has a small turning radius, flexible maneuverability, low failure rate, and high attendance rate, making it suitable for narrow mining loading and unloading sites, frequent turns, turning around, and uphill and downhill work conditions.
| Product model | MT20 |
| Driving style | Side drive/ Fully enclosed cab |
| Fuel category | diesel |
| Engine model | Yuchai YC6L290-33 with intercooler and turbocharger. |
| Engine power | 162KW(290hp) |
| gearbox model | HW10 (Heavy Truck 10-speed High-Low Gearbox) |
| rear axle | Heavy-duty Mercedes-Benz |
| front axle | 700T |
| Driving type | Rear drive |
| Braking method | automatically air-cut brake |
| Front wheel track | 2430mm |
| Rear wheel track | 2430mm |
| wheelbase | 3200mm |
| frame | Main beam: height 200mm * width 60mm * thickness10mm, Bottom beam: height 80mm * width 60mm * thickness 8mm |
| Unloading method | Rear unloading double support 130*1600mm Each oil proof has four pieces |
| front tire | 1000-20 steel belted |
| rear tire | 1000-20 steel belted (double tire) |
| overall dimension | Lenght6100mm*width2550mm*height2360mm |
| cargo box dimension | Length4200mm*width2300mm*heght1000mm |
| cargo box plate thickness | Bottom 12mm side 8mm |
| steering system | Mechanical steering |
| Leaf springs | Front leaf springs :11pieces*width90mm*thickness15mm Rear leaf springs:15pieces*width90mm*thickness15mm |
| cargo box volume(m³) | 9.6 |
| Climbing ability | 15° |
| load capacity /ton | 25 |
| Exhaust gas treatment method, | Exhaust gas purifier |
| Ground clearance | front alex rear alex 300mm |
Shandong Tongyue Machinery Co., Ltd is located in Weifang, Shandong Province, China. The main products are mining dump trucks, mining loaders, mining articulated trucks, and other mining, construction, and agricultural equipment. It is a comprehensive high-tech enterprise integrating product design and development, manufacturing, and domestic and foreign sales.
1,Are you factory or trade company ?
We are factory and We have been producing mining dump trucks for over 20 years.
2,,What is the minimum order quantity for your mining dump trucks?
The minimum order quantity can vary depending on the specific product model and customer requirements. We will provide suggestions based on the actual situation.
3,Can you provide quality certificates and inspection reports for your products?
Yes, we can provide quality certificates and inspection reports for our products to demonstrate compliance with relevant standards and regulations.
4,Is it possible to provide on-site demonstrations or trials?
Yes, we can arrange on-site demonstrations or trials to help customers better understand our products' features and performance.
5,What is the delivery time after ordering? Is there a risk of delayed delivery?
The delivery time can vary depending on the order quantity and product model, but we will inform customers of the specific delivery time after the order is confirmed. We will take all necessary measures to ensure timely delivery and reduce the risk of delays.
6,Can you customize products according to customer requirements?
Yes, we can customize products according to customer requirements to meet specific needs and requirements.
7,Do you provide after-sales service and technical support after ordering? How can customers contact your after-sales service team? Answer: Yes, we provide after-sales service and technical support after ordering. Customers can contact our after-sales service team through email, phone, or online customer service. We will respond as soon as possible to solve customers' problems.
8,What's your payment terms?
T/T: 30% deposit by T/T,70% balance should be paid before shipment.
9,Are special authorization or licensing required for installing and operating your mining dump trucks?
Generally, special authorization or licensing is not required for installing and operating our mining dump trucks. However, the specific situation may depend on local regulations and standards. We provide installation and operation instructions to ensure the correctness and safety of the use of our products.
