Complaint
Hopper
Capacity: 115L
Material: galvanized steel
Thickness: 1.0mm
| Drive System | ||
| Gear Motor | 1.1kw or 1.5kw. | |
| Feed delivery speed | V = 30m/min or 40m/min | |
| Drive system shell | stainless steel | |
| Driving (driven) wheel | reinforced nylon | |
| Designed with safety pin | ||
| With chain tighten device and emergency stop switch | ||
| Delivery system | |
| Feed pipe | 4 hole /3 m pipe |
| Diameter of feed pipe | φ45mm |
| Material of feed pipe | hot galvanized steel, galvanizing thickness 250g/m2 |
| Pipe thickness | 1.2 mm |
| Feed delivery capacity | 1.3T/h |
| Feed pipe could reserve 400-500g feed per meter | |
| Feed storage of feed pipe 400-500g/m | |
Feed Sensor
a. Feed sensor can be installed in the feed pan (NO), when there is lack of feed, motor will start and deliver feed; when there is full of feed, motor will stop (used for feed line and main feed line).
b. Feed sensor can be installed at the bottom of hopper(NC), function is just opposite with (NO ).
Auger
Top rank quality origin in South Africa
Delivery capacity: 450 Kg/h
Hang system of feed Line
1. Hang System of Feed line is composed of winch, pulley, fixed material, steel wire and wire clamp and so on.
2. Height of feed line system can be adjusted by winch, appropriate pan height is very important for poultry growing.
Correct Height: Bird Back height= Height of Upper and outer edge of pan grill
3. Feed line can be lifted by hang system, which significantly improve cleaning work and offer convenience for birds moving in and out.It also be design according to other automatic poultry equipment.
1. The drive motor is connected to the feed sensor, which gives back signal to start and stop the motor automatically, It could meet breeder feeding requirement during every stage of growing period.
2. All the feed pan filled simultaneous, which make the breeder could feed with same amount at the same time. Eliminate hungry hyperirritability , ensure uniform growth, enhance egg production rate.
3. Feed is delivered by disc-chain in the pipe, which greatly reduce feed damage. Closed feed delivery eliminate pollution and noise, avoid abrasion of feed pipe.
4. Disc soft link ensure cycle supply of feed, easy for installation.
5. Once suspension installation, lifelong use. Feeding density is 30% more than chain feeding.
1. High strength disc-chain
2. long lasting and anti-fracture
3. Disc is durable and resist breakage after special processing
4. Breaking force : 1.6tons
5. Non-feed-remaining corner
6. Corner and corner shell material- hot galvanized sheet or stainless steel, the idler material- cast iron
