1220*407mm Size Plastic Hollow Building Formwork Panel

Introduction:

The number of turnovers of plastic building formwork can reach more than 60 times, and it can also be recycled. Wide range of temperature adaptability, strong specification adaptability, can be sawed and drilled, and easy to use. The flatness and smoothness of the formwork surface exceed the technical requirements of the existing fair-faced concrete formwork. 1220*407mm size plastic hollow building formwork panel system is one of many building formwork. It uses polypropylene as raw material, and the hollow structure has the strength of building formwork. At the same time, it is easy to operate, light and easy to construct. 


Features: 

1. Light weight: The hollow structure make is lighter than other formworks and easy to move and install, especially when stripping from the wall.
2.High strength: The forklift rolled over it and no problems.
3.Good toughness: Can be bent up to circle degree without breaking and can be used as cambered special-shaped or customised shaped formwork.
4.High hardness: Hardness can reach 65-70 D, can fully fulfill a formwork function.
5.Impact resistance: Use hammar to hit and no break.


6.Wear resistance: Plastic materials make it more durable and less wearness than wood when using in construction site especially the corners and sides.
7.Smooth Surface: bright and clean; Concreting and forming and stripping effect is good.
8.Water Absorbtion: Nearly no water absorption rate make it waterproof, moisture-proof and mildewproof.




9.Environmentally friendly: Waste products can be collected and reprocessed, making full use of waste materials. This property can greatly reduce the project cost compared with wooden formwork and bamboo formwork and also be very environmentally friendly.
10. Energy saving: To replace or reduce the troditional wood and bamboo resources.
11.Safety: No any poisonous or harmful gas relasing.
12.Stripping off or demouldiing easily: No need brushing release agent oil or grease, only tapping, the formwork will fall off.





Packing: 

1.Loose packing: Can load more quantity in a contianer, but need long time and much labor when loading and lading. Below is the loose packing quantity for contianer loading: 1220*407mm size plastic hollow building formwork panel.

Size	Thickness	Qty./20GP	Qty./40HQ
2440*1220mm	12mm	735 PCS	1244 PCS
2440*1220mm	15mm	588 PCS	1166 PCS
2440*1220mm	18mm	490 PCS	1000 PCS

2.Pallet packing: It is fast loading and lading or discharging, but will lessen the loading quantity in container. Below is the pallet packing quantity for contianer loading: (Pallet height 10-12cm).

Size/Thickness	PCS/Pallet	Pallets & Qty./20GP	Pallets & Qty./40HQ
2440*1220*12mm	75 PCS	8 Pallets / 600PCS	16 Pallets / 1200 PCS
2440*1220*15mm	60 PCS	8 Pallets / 480PCS	16 Pallets / 960 PCS
2440*1220*18mm	50 PCS	8 Pallets / 400PCS	16 Pallets / 800PCS

Sample policy:
1.Sample size: 150*100mm, sample free, shipping fees need to be prepaid or using buyer's ecpress account for arrival pay. Usually 68 USD for 1-2 Pieces. pp hollow stair formwork .
2.Sample size: if bigger than 150*100mm, sample will be charged according to the size and shipping fees also accrodingly.
3.After the buyer place the formal order, we will refund the sample fees or deduct from the order value.

Payment Term:
1.If less than 5000USD Total value, 100% TT for deposit.
2.If value 5000-20000USD, 30% TT deposit and balance payment before ship from factory.
3.If value more than 20000USD, 50% deposit and balance payment before loading contianer.



Delivert time:
1.Usually 12mm 15mm 18mm thickness is available in stick within a contianer quantity.
2.Usually 7-9 days for a contianer production and perpare for contianer booking.
3.If customised size order, depens on the quantity and complexity.

FAQ: 
1. Q: What's your MOQ(minimum order quantity)?
A: Usually 1 pallet. 12mm=90 Pieces/Pallet, 15mm=72Pieces/Pallet, 18mm=60Pieces/Pallet.
2. Q: What's your packing methods?
A: 1. Loose packing: Can load more quantity in a contianer, but need long time and much labor when loading and lading. 2. Pallet packing: It is fast loading and lading or discharging, but will lessen the loading quantity in container.
3. Q: What's your payment terms?
A: T/T 30% in advance & balance payment before loading contianer.
4. Q: What's your delivery time?
A: 7-10 working days after received the deposit for a 40HQ contianer quantity.
5. Q: Are you manufacturer or trader?
A: 100% manufacturer and our fatory located in North Jinan City, Shanodng Province.
6. Q: Can we visit your factory? beam formwork.
A: Why not and warmly welcome. Once we have your schedule, we will arrange the reception team to follow you.
7. Q: Can you supply other formwork materials?
A: Yes. All related our formwork accessories can supply you. Like, support, rod and nuts, clamps.