Complaint
Our manual plastering wall machine is very easy to operate
| Model | 800mm | Alignment device | manual leveling |
| Plaster width | 800mm | Fixed device | Hydraulic machinery |
| Rendering height | 2.6-3.5m | Main engine size | 800*650*500mm |
| Rendering height | 5-30mm | Weight | 120kg |
| Rate of plastering | 400/8h | Climb model | gear wheel |
| Votage | 220v/380v | host package size | 1.05*0.8*0.8m |
| Motor power | 1.5kw | Pole package size | 2.45*0.32*0.2m |
| cement-sand rate | 1:3 | Gross weight | 260kg |
We usually use the wooden case to put into the plastering machine and we will send it by sea. the sea freight is very reasonable.
1. Plaster the window up and down.
The equipment uses the conveyor belt forward and upward conveying ash way can wipe to the top, which is other manufacturers can not do. The conveyor belt can be manually controlled to stop or supply ash at any position, achieving plastering up and down the window and above the door.
2. The wall is smooth and smooth.
The use of can change the Angle of the wipe board, up the large Angle of the wall, down the small Angle even cutting belt pressure light, to achieve the place of the machine, only in this way to ensure that the wall vertical zero error and can wipe to the top, and his manufacturer from the top have 50cm can not wipe.
3. Equipped with quick fixing device.
The use of hydraulic telescopic rod, top, top way, you can fix the machine in ten seconds, and the chassis is not stressed, moving the machine just like a jack to let go, the main rod down by self weight, the foot automatically lifted.
4. The width of the wipe board is designed according to the door of the suite. 3cm wider than the fuselage, you can freely go in and out of the house, Yin and Yang Angle can also wipe, wipe board behind the assembly of two miniature vibrators, you do not need to worry about empty drum and wall grasping force. The machine is equipped with a sealed universal wheel, which can be moved easily.
5. Imitation of artificial design.
There are two vibrators behind the board, and the vibrator and the conveyor belt are opened at the same time when the board rises. The conveyor belt continuously sends the ash into the mouth, and the conveyor belt automatically stops the ash supply 45cm away from the top. Because through calculation, the ash at the mouth is enough to wipe the top, the board automatically changes the Angle and reaches the top automatically or manually.
