Complaint
Standard drawing of Caps.
The cap is used to seal an open end of the pipe. In piping engineering, the cap made in accordance with ASME B16.9 will be welded to the end and need not be included in the length dimension of the run of pipe.
| NPS | O.D mm inch | E [NOTE(1)] mm inch | E mm inch | E1 [NOTE(2)] mm inch |
| 1/2 | 21.3 0.84 | 25 1.00 | 4.57 0.18 | 25 1.00 |
| 3/4 | 26.7 1.05 | 25 1.00 | 3.81 0.15 | 25 1.00 |
| 1 | 33.4 1.32 | 38 1.50 | 4.57 0.18 | 38 1.50 |
| 1-1/4 | 42.2 1.66 | 38 1.50 | 4.83 0.19 | 38 1.50 |
| 1-1/2 | 48.3 1.90 | 38 1.50 | 5.08 0.20 | 38 1.50 |
| 2 | 60.3 2.38 | 38 1.50 | 5.59 0.22 | 44 1.75 |
| 2-1/2 | 73.0 2.88 | 38 1.50 | 7.00 0.28 | 51 2.00 |
| 3 | 88.9 3.50 | 51 2.00 | 7.62 0.30 | 64 2.50 |
| 3-1/2 | 101.6 4.00 | 64 2.50 | 8.13 0.32 | 76 3.00 |
| 4 | 114.3 4.50 | 64 2.50 | 8.64 0.34 | 76 3.00 |
| 5 | 141.3 5.56 | 76 3.00 | 9.65 0.38 | 89 3.50 |
| 6 | 168.3 6.62 | 89 3.50 | 10.92 0.43 | 102 4.00 |
| 8 | 219.1 8.62 | 102 4.00 | 12.70 0.50 | 127 5.00 |
| 10 | 273.0 10.75 | 127 5.00 | 12.70 0.50 | 152 6.00 |
| 12 | 323.8 12.75 | 152 6.00 | 12.70 0.50 | 178 7.00 |
| 14 | 355.6 14.00 | 165 6.00 | 12.70 0.50 | 191 7.50 |
| 16 | 406.4 16.00 | 178 7.00 | 12.70 0.50 | 203 8.00 |
| 18 | 457.0 18.00 | 203 8.00 | 12.70 0.50 | 229 9.00 |
| 20 | 508.0 20.00 | 229 9.00 | 12.70 0.50 | 254 10.00 |
| 22 | 559.0 22.00 | 254 10.00 | 12.70 0.50 | 254 10.00 |
| 24 | 610.0 24.00 | 267 10.50 | 12.70 0.50 | 305 12.00 |
| 26 | 660.0 26.00 | 267 10.50 | … | … |
| 28 | 711.0 28.00 | 267 10.50 | … | … |
| 30 | 762.0 30.00 | 267 10.50 | … | … |
| 32 | 813.0 32.00 | 267 10.50 | … | … |
| 34 | 864.0 34.00 | 267 10.50 | … | … |
| 36 | 914.0 36.00 | 267 10.50 | … | … |
| 38 | 965.0 38.00 | 305 12.00 | … | … |
| 40 | 1016.0 40.00 | 305 12.00 | … | … |
| 42 | 1067.0 42.00 | 305 12.00 | … | … |
| 44 | 1118.0 44.00 | 343 13.50 | … | … |
| 46 | 1168.0 46.00 | 343 13.50 | … | … |
| 48 | 1219.0 48.00 | 343 13.50 | … | … |
*NPS: Nominal Pipe Size; O.D: Outside Diameter at Bevel; E: Length[NOTE(1)]; E1: Limiting Wall Thickness for Length; E: Length[NOTE(2)].
*NOTES:
(1) Length E applies for thickness not exceeding that given in column "Limiting Wall Thickness for Length, E."
(2) Length E applies for thickness greater than that given in column "Limiting Wall Thickness for Length, E" for NPS 24 and smaller. For NPS 26 and larger, length E shall be by agreement between the manufacturer and purchaser.
Exhibition
FAQ
To which country have you supplied your products?We have supplied to Thailand, China Taiwan, Vietnam, India, South Africa, Sudan, Peru, USA, Brazil, Trinidad and Tobago, Kuwait, Qatar, SriLanka, Pakistan, Romania, France, Spain, Germany, Belgium, Ukraine etc. (Figures here only include our customers in latest 5 years.). |
How can I get more details about your products?You can send an email to our email address. We will provide catalogue and pictures of our products for your reference.We can also supply pipe fittings, bolt and nut, gaskets etc. We aim to be your piping system solution provider. |
Are you trading company or manufacturer?We are manufacturer ,You can see the Alibaba certification. |
How long is your delivery time?Generally 30-40days if less 200ton. Above 200ton, 50days. |
How long is your delivery time?Generally 30-40days if less 200ton. Above 200ton, 50days. |
How can I get some samples?If you need, we will offer you samples for free, but new customers are expected to pay express charge. |
