Highway Seam Filling Machine 100L Asphalt Pavement Seam Filling Machine

Min.Order: 1

Product origin: Xuchang, Henan, China

Infringement complaint:

Complaint

US$ 1400 ~ 1700

Description

Highway seam filling machine 100L asphalt pavement seam filling machine
A pavement caulking machine is a new type of asphalt pavement caulking equipment. The equipment uses a thermal oil circulation to indirectly heat and melt the asphalt to ensure that the asphalt does not scorch, discolor, and paste the barrel. Hose caulking, manual forward and reverse stirring, uniform mixing, high melting efficiency, electronic ignition mode, automatic heating temperature control, automatic sensor temperature detection, automatic small fire insulation, high-temperature heating molten material, energy saving and time-saving, Ensuring long-term work.

Model	GF-100R
Dimension	215012501460mm
Tank volume	100L
Power	Honda Gasoline
Mixing method	Mixing motor
Grouting speed	0-25m/min
Tube length	5m
Control System	Full electronic thermostat control
Melting time	45min

An asphalt crack filler machine is a kind of asphalt crack repair machine that is suitable for filling the cracks in roads, expressways, asphalt, and concrete pavement of municipal, airports, squares, and industrial parks, as well as filling cracks of complicated and irregular pavement. As an indispensable road maintenance machine, it is mainly used for preventive maintenance of road surface diseases and in conjunction with road grooving machines and air blowers.

Electrically heated discharge pipe: good anti-blocking stainless steel liner and smooth discharge
High thermal conductivity and uniform heating of materials: no deformation in heating and good heat preservation Imported diesel burner as heating source
Strong power: brand engine, strong power, long life, more than 1 time than ordinary products, more than 5 years than ordinary products
Equipped with an Italian imported engine which improves the heat efficiency two or three times and shortens the working time.
Adopt the most advanced technology, which improves the quality of the pouring joint and reduces the cost.

Nine Notes for the Operation of the Asphalt Crack Filling Machine:
1. The operator of the asphalt crack sealing machine must be trained.
2. Workers should wear reflective overalls when working on the road.
3. Before starting working, workers should check the oil circuit and pipeline connection to ensure no leakage when the crack sealing machine is working.
4. Be careful of the high-temperature part of the asphalt crack sealing equipment to avoid burns.
5. When adding the cracking sealing material, pay attention to avoiding the asphalt splash.
6. There should be no water and air when adding heat conduction oil.
7. When operating the road crack sealing machine, please keep an eye on the condition of the furnace and temperature thermometer.
8. If an emergency happens, please turn off the power supply engine in time.
9. Don't put stones and other debris into the oil tank of the hot asphalt crack filler machine.

The machine features
(1) Steam and electricity integrated hybrid power, electric drive technology, low emission, low energy consumption, energy conservation, and environmental protection.
(2) Advanced intelligent ignition, detection, and temperature control technology.
(3) unique oil jacket hot melt kettle design.
(4) The only thermal cycle heating system design.
(5) Efficient discharge system design.
(6) The whole machine safety low center of gravity design.
(7) Electric stirring.
(8) Anti-blocking design of hot melt kettle

Exporting package

1 unit was packed into an iron frame and then packed with 5 layers of corrugated carton. 4 strips reinforced the carton. the fix package guaranteed the machines were not damaged during transportation

In 2000, "Ideal machinery" started a small workshop in Changge city, assembling rebar cutting machines and bending machines. through 20 years of development and relying on word-of-mouth advertising, our product involved kinds of light construction machines. In order to push our machines into the overseas market, the Brand "Ideal Machinery" is established in 2015 and started export trading. until now, nearly 10,000 sets of our machines are servicing overseas construction sites now.

Q1. What can we do if there are problems with the products?
A: Our engineers will analyze the problem for you and find the best solution. If problems happened within the guaranteed time, we can replace the components for you free of charge. We have dealers in some countries, for some technical problems which you can not solve by yourself.

Q2. What is the delivery time for your products?
A: Once we promise the delivery time, we will try our best to fulfill it. Special procedures such as emergency inventory will be used to maintain your uninterrupted supply of the products.

Q3. Is there any guarantee for your products?
A: Most of our products have one year guarantee(for the main parts).

Q4. How can you control your product quality?
A: Quality is always considered the most important part of our manufacturing process. All of our products come under a strict quality control system from raw material inspection, component inspecting,semi-finished product inspection, and performance test of finished products, to random inspection before delivery.