Complaint
Martensite stainless steel is a kind of stainless steel whose properties can be adjusted by heat treatment (quenching and tempering). Generally speaking, it is a kind of hardenable stainless steel. This characteristic determines that this kind of steel must have two basic conditions: one is that there must be an austenite phase zone in the equilibrium phase diagram, and it must be heated for a long time within the temperature range of this zone, so that the carbide can be dissolved into the steel, and then quenched to form martensite, that is, the chemical composition must be controlled within γ or γ+α The second aspect is to form a corrosion and oxidation resistant passivation film on the alloy, and the chromium content must be above 10.5%. According to the difference of alloy elements, it can be divided into martensite chromium stainless steel and martensite chromium nickel stainless steel
| C | Si | Mn | P | S | Cr | Ni | N | |
| 201/SUS201/S20100/1.4372/12Cr17Mn6Ni5N | ≤0.15 | ≤1 | 5.5-7.5 | ≤0.06 | ≤0.03 | 16-18 | 3.5-5.5 | ≤0.25 |
| 202/SUS202/S20200/1.4373/S35450/12Cr18Mn9Ni5N | ≤0.15 | ≤1 | 7.5-10 | ≤0.06 | ≤0.03 | 17-19 | 4-6 | ≤0.25 |
| 301/SUS 301/S30100/1.4310 | ≤0.15 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 16-18 | 6-8 | ≤0.1 |
| 302/SUS302/S30200/X9CrNi18-9/1.4325 | ≤0.15 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 17-19 | 8-10 | ≤0.1 |
| 304/SUS 304/S30400/06Cr19Ni10 (0Cr18Ni9) | ≤0.08 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 18-20 | 8-11 | - |
| 304L/1.4307/SUS 304L/1.4307/S30403 | ≤0.03 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 18-20 | 8-12 | - |
| 304LN | ||||||||
| 309/SUH309/SUH 309/S30900/1.4828/16Cr23Ni13 /1Cr20Ni14Si2 | ≤0.2 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 22-24 | 12-15 | |
| 309S/SUS 309S/S30908/1.4833/X7CrNi 23-14/06Cr23Ni13 (0Cr23Ni13) | ≤0.08 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 22-24 | 12-15 | |
| 310/S31000/S31020/X15CrNiSi 25-20/1.4841/1.4845/20Cr25Ni20 (2Cr25Ni20) | ≤0.25 | ≤1.5 | ≤2 | ≤0.045 | ≤0.03 | 24-26 | 19-22 | |
| 310S/SUS 310S/S31008/X12CrNi 25-21/ 1.4845/06Cr25Ni20 (0Cr25Ni20) | ≤0.08 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 24-226 | 19-22 | |
| 316/SUS316/ S31600/1.4401 /06Cr17Ni12Mo2 / | ≤0.08 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 16-18 | 10-14 | Mo:2-3 |
| 316L/316L/S31603/SUS316L/1.4435X2CrNiMo 18-143 | ≤0.03 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 16-18 | 10-14 | Mo:2-3 |
| 316Ti/S31635/SUS 316Ti/1.4571/ X6CrNiMoTi 17-12-2 / 06Cr17Ni12Mo3Ti | ≤0.08 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 16-18 | 10-14 | Mo:2-3 |
| 316LN | ||||||||
| 317/SUS 317/S31700/1.4449/X5CrNiMo 17-13/ 06Cr19Ni13Mo3 | ≤0.08 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 18-20 | 11-15 | Mo:3-4 |
| 317L/ SUS 317L/ S31703/ 1.4438/ X2CrNiMo 18-15-4 / 022Cr19Ni13Mo3 | ≤0.03 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 18-20 | 11-15 | Mo:3-4 |
| 321/S32100/SUS321/1.4541/X6CrNiTi 18-10 /06Cr18Ni11Ti | ≤0.08 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 17-19 | 9-12 | |
| 329/S32900/(1.4480)/ 4480-329-00-U/ SUS329J1 | ≤0.08 | ≤0.75 | ≤1 | ≤0.04 | ≤0.03 | 23-28 | 2.5-5 | Mo:1-2 |
| 347/SUS 347/ S34700/ 1.4550/ 06Cr18Ni11Nb/S34778 | ≤0.08 | ≤1 | ≤2 | ≤0.045 | ≤0.03 | 17-19 | 9-12 | Nb:10C~1.10 |
| 347H/S34709/1.4912/X7CrNiNb18-10/S34779/SUS347H | 0.04-1 | ≤1 | ≤2 | ≤0.045 | ≤0.045 | 17-19 | 9-13 | Nb:0.32-1.1 |
| 409L/S40900/1.4512/SUH409L /022Cr11Ti | ≤0.03 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 10.5-11.75 | ≤0.6 | Ti:0.12-0.75 |
| 410/SUS 410/SUS 410/X12Cr 13/1.4006 | ≤0.15 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 11.5-13.5 | ||
| 410S/S41008/SUS410S/X6Cr13/ 1.4000/06Cr13/ | ≤0.08 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 11.5-13.5 | ||
| 420/S42000/SUS 420J1/20Cr13 /1.4021/ X20Cr 13/1.4028/40Cr13 | ≥0.15 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 12-14 | ||
| 420J2/SUS 420J2/S42000/ X30Cr 13/1.4028/30Cr13 /4Cr13/X39Cr13 | 0.26-0.4 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 12-14 | ≤0.6 | |
| 430/S43000/SUS 430/X6Cr 17/ 1.4016/X6Cr 17 /10Cr17 /1Cr15 | ≤0.12 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 16-18 | ||
| 431/S43100/SUS 431/X17CrNi 16-2/1.4057/14Cr17Ni2 /14Cr17Ni2 | ≤0.2 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 15-17 | 1.25-2.5 | |
| 434/S43400/SUS434/S11790/X6CrMo 17-1 /1.4113 /10Cr17Mo | ≤0.12 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 16-18 | Mo:0.75-1.25 | |
| SUS436L/S43600/X2CrMoNbTi18-1/(1.4513)/ S11862 | ≤0.025 | ≤1 | ≤1 | ≤0.04 | ≤0 .03 | 16-19 | ≤0.6 | ≤0.025 Mo:0.75-1.5 |
| 439/S43035/X3CrTi17/1.4510/Z4CT17/X6CrTi 17 /SUS 430LX/S11863 | ≤0.03 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 17-19 | ≤0.5 | ≤0.03 |
| 441 | ≤0.015 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 17.5-19 | ≤0.3 | ≤0.25 |
| 443 | ≤0.2 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 18-23 | ≤0.5 | Cu:0.9-1.25 |
| 444/S44400/SUS 444/X2CrMoTi18-2/ 1.4521/S11972 | ≤0.025 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 17.5-19.5 | ≤1 Mo:1.75-2.5 | ≤0.035 |
| Outer Diameter | Seamless:6-720mm or Customized | |
| Welded:6-2500mm or Customized | ||
| Wall Thickness | Seamless:0.5-120mm or Customized | |
| Welded:0.5-40mm or Customized | ||
| Length | 1-12m as customer requirement | |
| Technique | Cold Drawn | |
| End/Edge | PE/BE/THR | |
| Material | TP304H, TP309S, TP309H, TP310S, TP310H, TP316, TP316L, TP316N, TP316H, TP317, TP317L, TP321, TP321H, TP347, TP347H, TP347LN, TP348, TP348H, TP405, TP410, TP429, TP430, TP443, TP446, TP409, TPXM-10, SUS304HTB, SUS304LTB,SUS309TB,SUS309STB,SUS310TB,SUS310STB,SUS316TB,SUS316HTB, SUS316HTB, SUS316LTB,SUS316TiTB,SUS317TB,SUS317LTB,SUS836LTB,SUS890LTB,SUS321TB, SUS409LTB, SUS410TB,SUS410TiTB,SUS430TB,SUS430LXTB,SUS430JL1TB,SUS436LTB | |
| Surface Fnished | Polishing, Annealing, Pickling, Bright | |
| Standard | ASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456, DIN17457,DIN 17459,JIS G3459,JISG3463,GOST9941,EN10216, BS3605,GB13296 | |
| Application | Pipeline Transport Boiler Pipe Hydraulic/Automobile Pipe Oil/Gas Drilling Food/Beverage/Dairy Products Machinery Industry Chemical Industry Mining Construction & Decoration Special Purpose | |
| Trade Terms | Price terms | FOB,CIF,CFR,CNF |
| Payment terms | T/T,L/C | |
400 Series - Ferritic and martensite Stainless Steels
Model 408- Good heat resistance, weak corrosion resistance, 11% Cr, 8% Ni.
Model 410 - martensite (high-strength chromium steel), with good wear resistance and poor corrosion resistance.
Model 416- The addition of sulfur improves the processing performance of the material.
Model 420 - "cutting tool grade" martensite steel, similar to Brinell high chromium steel, the earliest stainless steel. It is also used for surgical knife, which can be made very bright.
Model 430- Ferritic stainless steel, for decorative purposes, such as in automotive accessories. Good formability, but poor temperature and corrosion resistance.
Model 440- High strength cutting tool steel, with slightly higher carbon content, can achieve higher yield strength after appropriate heat treatment, and the hardness can reach 58HRC, making it one of the hardest stainless steels. The most common application example is the "razor blade". There are three commonly used models: 440A, 440B, 440C, and also 440F (easy to process).
| Out Diameter | Wall Thickness | Square Pipe/Tube(mm) | Rectangular Pipe/Tube(mm) | |||
| Inch | mm | mm | 16×16×0.4~1.5 | 70×70×2.0~6.0 | 10×20×0.6~1.5 | 30×60×1.0~4.5 |
| 1/2 | 21.3 | 0.6-3.0 | 18×18×0.4~1.5 | 75×75×2.0~6.0 | 14×21×0.6~1.5 | 40×50×1.0~4.5 |
| 3/4 | 26.9 | 0.6-3.0 | 20×20×0.4~1.5 | 80×80×2.0~6.0 | 15×30×1.5~1.5 | 40×60×1.0~5.0 |
| 1 | 33.4 | 1.0-3.0 | 25×25×0.6~2.0 | 85×85×2.0~6.0 | 15×38×0.6~1.5 | 40×80×1.5~5.0 |
| 1 1/4 | 42.3 | 1.0-4.0 | 30×30×0.6~4.0 | 95×95×2.0~8.0 | 20×30×0.6~2.0 | 40×100×2.0~5.0 |
| 1 1/2 | 48.3 | 1.0-4.0 | 34×34×1.0~2.0 | 100×100×2.0~8.0 | 20×40×0.8~2.0 | 50×60×2.0~5.0 |
| 2 | 60.3 | 1.5-4.0 | 35×35×1.0~4.0 | 120×120×4.0~8.0 | 20×50×1.0~2.0 | 50×80×2.0~5.0 |
| 2 1/2 | 76.1 | 1.5-4.0 | 38×38×1.0~4.0 | 150×150×6.0~10.0 | 22×35×0.9~2.0 | 50×100×2.0~8.0 |
| 3 | 88.9 | 1.5-9.5 | 40×40×1.0~4.5 | 180×180×6.0~12.0 | 25×40×0.9~3.75 | 60×80×2.0~6.0 |
| 4 | 114.3 | 2.0-9.5 | 44×44×1.0~4.5 | 200×200×6.0~12.0 | 25×65×1.0~2.0 | 80×100×2.0~8.0 |
| 5 | 141.3 | 3.0-9.5 | 45×45×1.0~5.0 | 220×220×6.0~14.0 | 30×40×1.0~3.75 | 120×60×2.5~10.0 |
| 6 | 168.3 | 3.0-12.0 | 50×50×1.0~5.0 | 250×250×6.0~14.0 | 30×45×1.0~3.75 | 120×80×2.5~10.0 |
| 8 | 219.1 | 3.2-12.0 | 60×60×1.5~5.0 | 30×50×1.0~4.0 | ||
| 10 | 273 | 3.2-12.0 | ||||
| 12 | 323.8 | 6.0-15.0 | ||||
| 14 | 355.6 | 8.0-15.0 | ||||
| 16 | 406.4 | 8.0-20.0 | ||||
| Package | 1)bundle with strip 2)water-proof sheeting 3)woven bags 4)PVC package 5)clients' Requirements |
| Shipping | 1)20ft container: 26tons (Can load 5.8M Max) 2)40ft container: 26tons (Can load 12M Max) 3)more than 100tons:can pack by bulk vessel 4)as your requirement |
| Port of Shipment | Tianjin, China |
| Date of Delivery | According To The Quantity And Specification Of Each Order |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawing
