GDYZ-302W Metal Oxide Arrester (MOA) Tester

Min.Order: 1

Product origin: Wuhan, Hubei, China

Infringement complaint:

Complaint

US$ 2680 ~ 5180

Description

GDYZ-302W Metal Oxide Arrester (MOA) Tester

General information

GDYZ-302W Metal Oxide Arrester Tester is is composed of a host, a detector, and an insulating rod. The host and the detector adopt wireless communication, the communication distance is 30 meters, the host can remotely open or close the clamp head of the detector to complete the test process, and the host can display the current test value and the status of the clamp head in real time. The detector uses a micro motor to drive the opening or closing of the clamp head. The clamp head is made of high-performance permalloy, which has super anti-interference ability and is hardly affected by external magnetic fields. The resolution is as high as 1uA. The detector can be connected to an insulating rod for testing of zinc oxide surge arresters on high-voltage lines. The meter can also be used as an ultra-high-precision clamp-on leakage current meter.

The meter also has data holding and data storage functions, equipped with a USB interface, and the stored data can be uploaded to the computer.

Performance

Leakage current, AC current

Range	Resolution	Accuracy
0.000mA~1mA	1uA	±1%rdg±8dgt
1.00mA~10.00mA	0.01mA
10.0mA~100.0mA	0.1mA
100mA~300mA	1mA

High-order harmonic current (fundamental wave current, third harmonic current)

Minimum fundamental wave input current	Above 3% of each range
Accuracy	1%rdg±8dgt (± AC current accuracy)

General Specification

Function	By testing the full current of the zinc oxide arrester, it can be judged online whether the zinc oxide arrester is deteriorated, and it can also be used as an ultra-precision clamp-on leakage current meter.
Power supply	Host: DC 7.4V 2000mAh rechargeable lithium battery, the battery is about 8.4V fully charged Detector: DC 7.4V 2600mAh rechargeable lithium battery, the battery is about 8.4V fully charged
Testing method	Clamp-on CT
Measurement range	AC 0.000mA~300mA (True effective value)
Max. resolution	1μA
Measurement accuracy	±1%rdg±8dgt (23ºC±5ºC, below 80%RH)
Wireless communication	433MHz wireless communication
Wireless transmission distance	30m
Display mode	3.5-inch color screen; display area: 71mm×53mm
Instrument size	Host: 195mm×100mm×45mm; Detector: 208mm×131mm×90mm
Instrument weight	Host: about 400g; detector: about 1220g, Total: about 7000g (including insulating rods and accessories)
Clamp size	φ40mm
Sampling rate	2 times/s
Date storage	200 groups, "HOLD" symbol indicates during storage.
Data hold	In the test mode, press the HOLD key to keep the data and store the data, the "HOLD" symbol is displayed, and then press the HOLD key to cancel.
Checking data	"READ" symbol indicates that the stored data can be flipped up and down.
Overflow	"OL" shows overflow the testing range.
No signal	When the host receiver does not receive the detector signal, the current status of the detector cannot be displayed.
Auto off	The instrument will turn off automatically after 10min to save the battery.
Battery voltage	When the battery voltage is below 7.8V, shows that it is time to change the battery.
Line voltage	35kV and below
Environment temperature and humidity	-20ºC~40ºC; below 80%Rh
Storage	-20ºC~60ºC; below 70%Rh
Interference	No 433MHz frequency signal interference
Insulating rod size	4-section push-button telescopic insulating rod (extended state 5m, closed state 1.5m, outer diameter φ44mm)
Insulation strength	Single insulating rod AC110kV/rms, the shell of the HV detector between the iron core: AC1000V/rms