Complaint
15~200A series non-sparking explosion-proof plug & socket is suitable for petroleum exploration, electric control, and other electrical connections, which meets the standard IEC60079-15:2010and GB3836.8-2003" Electrical Apparatus for Explosive Gas Atmosphere Part 8:Type of1Protectionn
ATEX Certified--for zone 2-lIC hazardous environment.Certificate number CE0470 Nemko 07ATEX3202.
COST Certified--- examined and tested for qualification by China National Quality Supervision and Test Center for Explosion Protected Electric Products(COST) and obtained the explosion-proof certificate.Ex mark: Ex nA I T4 Gc.
Three kinds of options are made available for sockets. Fixed socket(GZ), Mobile socket(YZ),3Tilt-typesocket(XGZ).
Benefits
- Rugged: All components have aluminum housings
- Minimal heat build-up
- Energy savings
- Low maintenance costs
- Perfect function over 500 mating operations
- Longer product life
| Main Technical Features | |
| Ex mark | Ex nA IIT4 Gc |
| Intended use | Can be used in zone 2 |
| Ambient Temperature | -40C ≤Tas 60C |
| Working Voltagc | 250V/400V/500VAC |
| Working Current | 15A/25A/60A/100A/150A/200A(300A) |
| Withstanding Voltage | 2800VAC1min |
| Protection degree | IP54 |
| Connection type | Crimp |
| contact number | 3-pins,4-pins,5-pins |
| Life duration | 500 times |
| Both pin and jack could be inserted in a plug or socket | |
| Plug | Socket |
Note:
1. The type for 3 phases 4 wires plug & socket can be labeled without the contact number. For example:15YT.60YZ.200GZ
2. The female plug or male socket can be marked 100YT-5K(female plug) or 25GZ-4J(male socket).
Outline and installation dimensions:
A. Mobile plug(YT)
B. Fixed plug(YT)
C. Mobile socket
1) How can I place an order?
A: You can contact us by email about your order details, or place an order online.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are used.
3) What's the order procedure?
A: First we discuss order details and production details by email or TM. Then we issue you a PI for your confirmation. You will be requested to do a prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit them to our customer or replace them in the next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure.
