Easy to Install & Fix Partition Wall Panel Calcium Silicate Board

Min.Order: 2,100
Product origin: Foshan, Guangdong, China
Infringement complaint: complaintComplaint
US$ 1.65 ~ 1.86

Description

Sanle calcium silicate board is a new type of green environmental protection board with excellent performance, such as fireproof, moisture proof,insect-resistant ant, easy working, thermal insulation,low deformation coefficient and durable. It is widely used for ceiling, partition wall, basal plate for EPS board and baseplate for decorative board in offices, hospitals, factory building, villas,theaters and various art buildings.


Specification:
Thickness(mm)Width(mm)Length(mm)
4-3012202440
Dimensional deviation:
Thickness≤8mm±0.3mm
≥ 9mm±0.5mm
Width≤1220mm±3mm
>1220mm±4mm
Length≤2400mm±4mm
>2440mm±5mm
Physical properties: 
Density1.2-1.6g/cm3
Thermal conductivity≤0.29 W/(m.k)
Water absorption≤40%
Water contain≤10%
Moisture movement≤0.25%
Bending strengthaverage>12 Mpa
strength ratio>60%
Non-combustibilityclass A


1. The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.

2. The vertical keel should be aligned well according to the requirement (generally being 612 mm) with laterally supporting keel installed.

3. Cutting the board material to the dimensions needed (about 10mm lower than wall height)

4. Board material is fixed on keel in anchoring seam way with tapping screw: the interval of    tapping screw is generally about 200~250mm with screws sinking 0.5mm under the board face.

5. The expansion seam of about 4mm between boards should be kept.

6. The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously to avoid generating inner stress to make board material bucking.

7. Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.

1.Carry out ceiling line-measuring to determine the ceiling's fixed position, the boom's central range is generally 1200.

2.Connect and fix the boom and main keel with hanging piece to make the main keel keep level position.

3.Vertically fix the sub-keel to the main keel with hanging piece; the sub-keel axis'central range is 612mm.

4.Install the laterally supporting keel properly, its central ranges is 1224mm.

5.Fix the board on sub-keels with tapping screws, and to well the seam-connecting treatment.

Company Introduction

Foshan Jujian Yifang Trading Co., Ltd is a subsidiary of Sanle Building Materials Group. Sanle Building Materials Group is one of the Chinese largest building materials company group, enjoys the well-known Sanle brand at home and abroad. Our group was established in 1998. We are a professional comprehensive building materials group company engaging in the research, development, production, sale and service of fiber cement board, calcium silicate board, EPS cement panel, decorative cement panel and wood grain fiber cement siding panel, gypsum board, MDF board, chipboard, plywood board etc. Our R&D team has more than 20 years R&D production experience. After years development, now we own 4 production bases in China, such as Foshan, Zhaoqing,Hebei and Kunming.

The headquarter of our Sanle Building Materials Group is located in GuangFo Smart Home Mall, Foshan, China. Our group covers more than 220,000 sqm factory area , with 800 workers and more than 10% R & D personals. Advanced technologies, integrated management system, integrated technical criterion, integrated testing procedure, and advanced testing equipment ensure our products with good quality. All of our products are approved by national standards. We offer one-stop service on most of building materials, to save your time and your cost. We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent product and service! We sincerely welcome you to visit our company or contact us for cooperation!
Main product
Plywood, MDF board,Particle board,Chip board,Gypsum board,Fiber cement siding board,Non-asbestos cement board, Calcium Silicate Board etc.
FAQ

Q1.What is your terms of packing?
A:Generally,we pack our goods in bundles or wood pallet. We can also do package according to customer's request

Q2.What is your terms of payment?
A:We accept 30% T/T in advance,70% in the period of shipment. Or L/C at sight. 

Q3.What is your terms of delivery?
A:EXW,FOB,CFR.CIF.

Q4.How about your delivery time?
A:For stocks,we can send the goods to loading port within 15 days after receiving your deposit. For production period, it usually needs
about 20 days-25days after receiving the deposit.


Q5.Can you product according to the sample?
A:Yes,we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6.Do you provide samples for free?
A:We can provide samples for free, but you need to pay for shipping.

The products can meet the national&international environmental standards,and have passed ISO9001:2008,US CARB,SGS,CE
certification, and also we offer OEM services. If you have any other questions.pls feel free to send email to us.
Product Tag:
Related categories:
Scroll to Top