Complaint
| The specification of 2.5 ton diesel forklift | |||
| Manufacturer | LTMG | ||
| Model | Power shift T/M | FD25 | |
| Load capacity | kg | 2500 | |
| Load center | mm | 500 | |
| Power unit | Diesel | ||
| Operator type | Driver/seat | ||
| Tire type | Pneumatic | ||
| Wheel | Front/rear | 2/2 | |
| Max. lifting height | mm | 3000 | |
| Free lift | mm | 160 | |
| Fork size | L*W*T | mm | 1070*122*40 |
| Tilt range | Mast forward/backward | deg | 6/12 |
| Overall length(without fork) | mm | 2530 | |
| Total width | mm | 1150 | |
| Mast height (fork lowering) | mm | 1995 | |
| Overall height fork raised | With backrest | mm | 4030 |
| Height to head guard | mm | 2120 | |
| Turning radius(outside) | mm | 2240 | |
| Front face of fork to front axle | mm | 450 | |
| Min. right angle stacking aisle without load length&clearance | mm | 2690 | |
| Speed | Max Travelling full/no load | km/h | 17/19 |
| Lifting full/no load | mm/s | 550/580 | |
| Lowering full/no load | mm/s | 450/550 | |
| Max.drawbar pull | Power shift T/M full/no load | kg | 1670/830 |
| Manual shift T/M full/no load | kg | 1700/830 | |
| Gradeability at 1.6km/h | Power shift T/M full/no load | % | 23/18 |
| Manual shift T/M full/no load | % | 18/18 | |
| Truck weight | kg | 3670 | |
| Weight distribution | Full load front/rear | kg | 5410/760 |
| No load front/rear | kg | 1430/2240 | |
| Tires | Number | front/rear | 2/2 |
| Model | front axle | 7.00-12-12PR | |
| rear axle | 6.00-9-10PR | ||
| Wheelbase | mm | 1600 | |
| Tread | Front/rear | mm | 970/970 |
| Ground clearance | At lowest point(mast) | mm | 110 |
| Frame | mm | 115 | |
| Brake | Service brake | Hydraulic-foot pedal | |
| Parking brake | Mechanical-hand lever | ||
| Battery | Voltage/capacity | V/AH | 12/80 |
| Engine | Model | ISUZU C240 | |
| Rated power | kw/rpm | 34.3/2500 | |
| Rated torque | N.m | 138/1800 | |
| Number of cylinders | 4 | ||
| Placement | L | 2.369 | |
| Fuel tank capacity | L | 70 | |
| Transmission | Speed forward/backward | Power shift T/M Manual shift T/M | 1-1 power shift T/M 2-2 manual shiftT/M |
| Operating pressure | Hydraulic system pressure | kg/cm² | 180 |
