Description
Product Description
Fixed intelligent full-automatic tracking 3D automobile four-wheel aligner
Product structure
- The chassis is made of cold plate Q235 plate gold
- The column adopts steel structure two-section square pass combination structure, and the distance between the column and the center of the front wheel of the vehicle (center of the corner plate of the lift machine) is 1.6-2.8 meters.
- The base plate gold piece, material Q235. Welded with the square tube to form the lower column, the upper column square pass and the square tube of the five square column are inserted and connected, and the bolts are connected and locked from four sides.
- The column connecting bracket is a combination of plate gold and beam and column.
- Computer using WIN7-64 bit operating system, dual screen display (32, 18.5 ") installation environment temperature: -10-+50ºC, relative humidity ≤85%,
- Display accuracy: 0.01°/1´/0.1mm/0.1inch, Chinese and English bilingual version. The target is marked on the back to distinguish the front, rear, left and right orientation.
Fixed intelligent full-automatic tracking 3D automobile four-wheel aligner- Operating system win64 bit
- Fully automatic tracking lifting mechanism, no need for manual intervention.
- Positioning special station, accurate detection data, fast detection speed.
- The measuring platform does not need to be horizontal, only the target is in the visible range of the camera.
- Dynamic machine algorithm technology, real-time dynamic monitoring of vehicle data.
- Short distance of cart, micro distance cart technology, no need to stop halfway.
- Wheel base, wheel base difference, wheel base, wheel base difference, body size detection.
- Real time display of kingpin data is convenient for suspension detection.
Detailed Photos
Standard Accessories
Aluminum alloy beam*1, column*1, aluminum alloy corner plate*2, 4*four jig. Orientation fixing bracket *1 . Front and rear wheel stop *4. Computer host *1 . Monitor standard 18.5 inches, optional (24 inches) keyboard *1, 1*mouse, complete wiring harness *1 set, beam connection bracket *1 piece, column cap *1, 4* jig hanger
The following figure shows host components.
Product Parameters
| Item | Precision | Measurement range | Maximum measurement range |
| Camber Angle | ±0.015° | ±0.01° | ±30° |
| Rear Angle | ±0.025° | ±0.01° | ±30° |
| Kingpin inward Angle | ±0.025° | ±0.01° | ±15° |
| Kingpin inward Angle | ±0.025° | ±0.01° | ±20° |
| Rear wheel propulsion Angle | ±0.015° | ±0.01° | ±6° |
| Maximum steering Angle | ±0.015° | ±0.01° | ±30° |
| Angle of retreat | ±0.015° | ±0.01° | ±6° |
| Wheel pitch | ±0.25cm | ±0.01° | 3000mm |
| Wheelbase | ±0.25cm | ±0.01° | 8000mm |
| Diagonal | ±2mm | ±0.3cm | 12000mm |
| Wheel radius | ±2mm | ±0.3cm | 700mm |
Our Advantages
Product advantage
- Higher precision, more powerful
- The accuracy of the equipment can reach 0.01°0.1mm.In addition to the detection of all the traditional general parameters, and can measure wheel deviation, axis deviation and other parameters.
- Easy to realize the full set out to give you laser locator can not complete many functions.
Simple operation(With detailed instructions before delivery) Its measurement is not affected by lifting platform levelness, body tilt diagonally its accuracy is not affected. All vehicle four-wheel positioning parameters can be measured only by pushing a cart or rolling a wheel, without regular calibration, and can be used at willLow failure rate- Because there are no electronic components on the target, no batteries required, no data transmission required, it only acts as a reflection.
- The main case is made of sheet metal with small case rolling wheels underneath.
- The beam is made of aluminum alloy and has strong anti - corrosion and anti - pressure ability.
Computer for the brand of high - equipped machine, in order to facilitate large data processing, good and stable performance.The failure rate is lower due to the following 3D intelligent positioning1.This machine adopts cruise guidance 3D intelligent positioning technology: when the reflection target image is not in the shooting area of the camera, the computer instructs the beam motion mechanism to cruise. When the launch target is found, it will automatically locate in a suitable shooting position. The use of this technology: save time, when the car is on the lift, in a lower position, the beam is at a high, without manual operation, automatic positioning in a more appropriate shooting position
2.The dynamic body coordinate computing technology is adopted
3.Real-time calculation of the center space position of four wheels, and on this basis to establish the three-dimensional body coordinates OXYZ,OXY for the horizontal plane, Y axis and vertical base, the front and rear axles of the vehicle in the dynamic establishment of the coordinate system decomposition, real-time compensation for the uneven lift, tilt diagonally caused by the positioning Angle deviation. Role of dynamic body calculation technology: positioning Angle will not be affected by the uneven and tilting of the lifter, and will not be affected by vehicle wheelbase length and wheel base size.
4.Micro-distance cart technology: Generally, the 3D four-wheel locator (including foreign countries) needs to stop for a period of time to push the cart to the back. In the algorithm, the initial position and the stop position are selected for calculation. When the distance is as large as 17-23CM, the distance blade is short and the test accuracy cannot be guaranteed. The distance of the cart can be shortened to about 10CM, and the higher accuracy of the halting cart can be achieved. The role of macro cart technology: labor saving, time saving and fast, not affected by the Angle plate and lifting machine height, measurement data is more stable.
5.This machine adopts all-directional automatic tracking technology: it is a technology that can automatically track the lifting machine whether it is in target monitoring (or camera maintenance) or in the process of test and adjustment by reflecting the accurate calculation of target image position by the computer without remote controller and without the control of the mobile phone.
6.Function of all-directional automatic tracking technology: saves time. When the hoist needs to be lifted to adjust the positioning Angle after testing at a lower position, the hoist does not need to switch to the target monitoring (or camera maintenance) operation interface. Simply press the hoist vehicle to adjust the positioning Angle. The positioning accuracy is higher, because the camera and the reflection target always maintain the most appropriate position, which can improve the image quality and ensure the positioning accuracy.
The camera responds quickly Low temperature performance is good, can work around minus 30 degrees Celsius, response time is only 3S, camera speed of 30 photos per second.
Certifications
Packaging & Shipping
Company Profile
FAQ
1. Why choose us?
1). Patented Product
2). Only professional cost-effective equipment
3). Low prices with high quality revenue producing products
4). Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
5). The best customer service. Quick reply within 24 hours and more.
6). Great Warranty
2. How safe are our 3D wheel Alignment/Tyre Balancer/Car lifting Machine?
Our 3D wheel Alignment have been tested and CE and ISO certified for safety . They also meet the American and Australian Standard.
3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.
4. Are our 3D wheel Alignment/Tyre Balancer/Car lifting Machine designed for commercial use?
All of our 3D wheel Alignment/Tyre Balancer/Car lifting Machine can be used in commercial applications without any problems.
5. Do you offer any custom designs?
Yes,we provide OEM/ODM services to top range partners.Produce a superior product for you by your designs.
Complaint
