Complaint
1. It's suitable for PLA,corn starch,PP,PE,APET,PVC,PETG ,PS,ABS ,EPS,HIPS and other plastic sheet forming.
2. Processing the high transparency, high depth, circular, square Shape, irregular, top and bottom both sides stretch, turnup etc. It produce variety of medical industry blister lining,the food industry's lunch box,toys, tray, dish, bowl, cover, electronic industry and other industrial packaging.
| 1 | Model | ZS-5070 |
| 2 | Max forming area | 500*700mm |
| 3 | Mold platform driving method | Upper and lower mold platform driving by one connecting rod |
| 4 | Advantage | Reduce mold cost, power saving, removable heating furnace, adopt air shaft in feeding station, quick mold change device,price much lower |
| 5 | Cutting type | Cut outside mold |
| 6 | Max forming depth | 180mm |
| 7 | Material thickness | 0.1-2.0mm |
| 8 | Max material diameter | 1000mm |
| 9 | Production speed | 13-40cycle/min |
| 10 | Total power | 108kw (Normally use 35-70kw) |
| 11 | Voltage | 380v-50hz-3ph |
| 12 | Weight | 12T |
| 13 | Dimension (L*W*H) | 9500*2400*3200mm |
1. Automatic Feeding 2. Three or Two stage Heating 3. Positive and negative pressure forming
4. Servo Driving cutting 5. Automatic stacking 6. Scrap recycling
1. The material is heated by (three or two) stages upper and lower infrared heating furnace, and the temperature of each segment is adjustable.
2. The main frame is welded or jointed by steel profile. So it has enough strength and stiffness.
3. All metal surfaces have been treated with rust preventive coating.
4. Two kinds of cutting mold
(1)Aluminum Movable cutting mold: Each blade is consist of blade holder and locating block. Switch on the heating system when use the cutter, the products would be smooth and no spot on it.
(2)Laser wood cutter: the blade holder is made by plywood. The profile of the cutting line is cut out by laser , then the blades are inserted into blade holder. The cost is low, suitable for low-demand products.
5. Quick mold change device. Before mold installation,switch on the manual valve,the air locking mechanism will open, after moving the mold onto the right position, switch off the manual valve, then the air locking mechanism will close to realize quick mold change. The whole process need 10 minutes.
6. There are a number of protective measures. Any action that may cause collision with each other are prevented.
7. Manual/automatic two working mode. All settings are implemented on the touch screen. After the operator put the material on position and press the automatic switch ,the equipment will complete the whole forming process. Manual mode is mainly used for mold change and sample test.
| Item | Brand |
| PLC | Japan OMRON |
| Touch screen | Kunlun Tongtai |
| Control relay | Japan OMRON |
| Solenoid valve | Japan CKD/SMC |
| Vacuum pump | Germany Hokaido or Joysun 100m³ |
| AC contactor | Japan Mitsubishi |
| Heating method | Electric heating brick |
| Thermoregulation System | AOYI Temperature Control Module |
| Cylinder | ZHICHENG(Joint Venture) |
| Oil-Water separator | Korea SANWO |
| Inverter | INVERDEX |
| Servo motor | DELTA |
| Beam guide rail | 6063 Aluminum profile with stainless steel surface |
| Material pulling chain | Double row sharp teeth type |
| Water chiller | Lingtong |
| Cutting method | Crank arm structure+ Servo motor +Removable aluminum cutting mold |
1. Power Supply: 380V-50HZ-3PH or customized.
2. Air supply: 1" (DN25) compressed air interface, pressure 0.6-0.8 MP.
3. Vacuum pump , water chiller is included in the machine.
4. Customers should prepare their own air storage tank , air compressors, dryer.
| Air compressor | Air storage tank |
1. Workshop entry width over : 3.0M
2. The height of workshop over : 3.5M
3. Ground load over 1 ton / m2.
