Description
Rubber hose steelRubber hose steel wire is also called rubber hose reinforced steel wire, brass coated steel wire, is plated on the surface of the steel wire by electroplating method, copper coating composition of about 65%, about 35% zinc, the purpose is to increase the binding force of steel wire and rubber, used for high pressure rubber hose in the reinforcement material. Applications:Is widely used in high pressure hose , coal mining machinery, engineering machinery, hydraulic machine, tanker, oil field drilling machine, Marine oil transportation system etc.Specification:Our company can produce the diameter from 0.20mm to 0.80mm between ordinary strength, high strength and ultra-high strength hose steel wire, to meet the customer's different production technical requirements.| Item | Dia.(mm) | Tolerance(mm) | Tensile Strength
(Mpa, N/mm2) | Torsions
(L=100d) | Reverse Bends
(r=2.5) |
| 0.2mm | 0.2 | ±0.010 | 2150-2450(LT)
2450-2750(NT)
2750-3050(HT)
3050-3350(ST) | 70
70
65
60 | 125
125
125
110 |
| 0.25mm | 0.25 | ±0.010 | 2150-2450(LT)
2450-2750(NT)
2750-3050(HT)
3050-3350(ST) | 70
70
65
60 | 125
125
105
75 |
| 0.30mm | 0.3 | ±0.010 | 2150-2450(LT)
2450-2750(NT)
2750-3050(HT)
3050-3350(ST) | 65
60
60
50 | 105
95
85
60 |
| 0.35mm | 0.35 | ±0.015 | 2150-2450(LT)
2450-2750(NT)
2750-3050(HT)
3050-3350(ST) | 65
60
60
50 | 60
60
55
50 |
| 0.4mm | 0.4 | ±0.015 | 2150-2450(LT)
2450-2750(NT)
2750-3050(HT)
3050-3350(ST) | 60
60
50
50 | 55
55
50
45 |
| 0.42mm | 0.42 | ±0.015 | 2150-2450(LT)
2450-2750(NT)
2750-3050(HT) | 60
60
50 | 50
50
45 |
| 0.46mm | 0.46 | ±0.015 | 2150-2450(LT)
2450-2750(NT)
2750-3050(HT) | 60
60
50 | 45
45
40 |
| 0.50mm | 0.5 | ±0.015 | 2150-2450(LT)
2450-2750(NT)
2750-3050(HT) | 60
60
50 | 40
35
30 |
Brass Plated Steel Wire for Hose ReinforcementBrass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
Is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
Description:the steel cord for making rubber trac
The steel cord for making rubber track is make with 3 ends or more copper plated yellow wire through special equipment and become, up to 149 ends. The steel cord for rubber crawler produced by HL GROUP LTD. has the advantages of high strength, high toughness, low elongation, excellent coating quality and strict control of copper and zinc ratio, which ensures the good combination of steel cord and rubber, and enables rubber crawler to meet the requirements of operation under various harsh conditions
Characteristics:Compared with the traditional metal track, the rubber track made of steel cord as the skeleton material has the advantages of low ground pressure, light machine weight, high speed, low noise, small vibration, no damage to the road surface and large traction force.
Specification:1*3*0.25mm, 7*7*0.25mm, 7*7*(0.38~0.56mm), 7*19*(0.25~0.50mm), 0.25+18*0.22mm etc.
Note: The above are general technical specifications, which can be adjusted according to customer' requirements.
Complaint
