Description
Feature1.Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixed. It is in conformity with the requirement of GMP.
2. The heat is indirect of YZG Round Model Vacuum Dryer. So the raw material can not be polluted. It is in conformity with the requirement of GMP. YZG Round Model Vacuum Drying Oven is easy in washing and maintenance.
3. Machine materials : AISISUS304 , AISISUS316L, and other material .
4. For the electrical component , we mainly use international brand such as ABB ,Siemens or Schneider.
5.YZG Round Model Vacuum Drying Oven: Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
6.The heat source for evaporation may be low pressure steam or surplus heat steam.
The heat loss is less.
7.It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
8. Smooth running, reliable performance, easy operation.
9. Highly polished inner and outer surfaces of the machine, no dead comer, easy to clear, no cross contamination. Confining to the requirement of GMP.
10. Lower energy consumption
11. Be clean for drying under the sealed condition.
12.The vaporization speed of liquid will be increased with declination of atmospheric pressure.
13. Control system has more choices, such as push button , HMI+PLC and so on.
PrincipleYZG Round Model Vacuum Drying Oven:It uses vacuum pump to pump damp air out and make the working chamber form vacuum status. It is to let the raw material to be dried at vacuum condition. herefore, the drying speed of raw material is improved and the energy is saved greatly.
Medicine Vacuum Drying Oven is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.
Notes: The solvent of raw material can be collected by using a condenser. If the solvent is water, the condenser is not required in order to save investment cost.
AdvantageUnder the condition of vacuum, the boiling point of material solution will reduce. It will increase impetus for heat and mass exchange. Therefore for certain heat exchange amount, it can save heat exchange area of evaporator.
The heat source for evaporating operation may be low pressure steam or waster heat steam (If having special requirement, customer may choose water or oil to heat. Our factory can design specially for you).
Heat loss of evaporator may be reduced.
Suitable for drying thermal sensitive material that is easy to decompose, polymerize or denature.
Before drying, it can carry out disinfections. During the period of drying, any impurity can't be mixed into it.
It is static vacuum dryer, the form and structure of material to be dried can't be damaged.
Model Item | YZG-600 | YZG-800 | YZG-1000 | YZG-1400 |
Inner size of drying chamber(mm) | 600×976 | 800×1247 | 1000×1527 | 1400×2054 |
Outer size of drying chamber(mm) | 1153×810×1020 | 1700×1045×1335 | 1693×1190×1500 | 2386×1657×1920 |
Layers of backing support | 4 | 4 | 6 | 8 |
interval(mm) | 81 | 82 | 102 | 102 |
Size of baking tray(mm) | 310×600×45 | 520×410×45 | 520×410×45 | 460×640×45 |
Quantity of baking tray | 4 | 8 | 12 | 32 |
Working pressure inside the pipe of baking support(MPa) | ≤0.784 | ≤0.784 | ≤0.784 | ≤0.784 |
Temperature inside the chamber(°C) | ≤150 | ≤150 | ≤150 | ≤150 |
Degree of vacuum inside the chamber when operation in idle, MPa | ≤30 |
Under the vacuum condition of 30and110°C ,evaporation rate of water(kg/m2,h) | 7.2 |
Model and power of vacuum pump when condenser is used(kw) | 2X-15A 2kw | 2X-30A 3kw | 2X-15A 3kw | 2X-70A 5.5kw |
Weight of drying chamber(kg) | 250 | | 800 | 1000 |
Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is near Shanghai.It only takes you about 1 hour to get to Changzhou. Or we can visit you in Shanghai.
Q: What's the quality of your products?
A: Parts of our products come with the best quality, We already exported to lots of countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely
Q: What to do if the machine has a problem?
A:24 hours timely response of mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost.
Q: How long is the warranty of your equipment?
A: Our warranty period is one year generally.
Q: What is your payment term
A: Our usual payment term is: 30% TT in advance, 70% TT before shipment. Other ways can also be received after both sides discuss and agree.
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai, if you request CIF, please give us your delivery port, and we will give you the CIF price.
Complaint
