Shark Oilfield Calcium Carbonate Lost Circulation Material LCM

Min.Order: 40

Product origin: Tianjin, China

Infringement complaint:

Complaint

US$ 10 ~ 600

Description

Product Description

CARB 150 lost circulation material (LCM) is ground marble in 150 μm averaged particle size. It is high-purity, acid soluble, calcium carbonate used as a bridging and weighting agent in drilling, drill-in and workover/completion fluids. SIZED CARBs are available in 8 standard grind sizes: 5, 25, 50, 150, 400, 600, 1200, 2500. The numbers reflect the nominal median particle size(D50) of the product.

Applications/Functions

SIZED CARB 5, 25 and 50 bridging agents can be used to:

Increase the density of WBM, OBM and brine-based fluids
Bridge for fluid loss control

SIZED CARB 50, 150, 400, 600, 1200 and 2500 bridging agents can be used for:

Lost circulation problems
Squeeze mixes

Advantages

Acid-soluble, product which minimizes formation damage
Effective bridging agent

Typical Properties

Appearance: White powder or granula
Specific gravity: 2.7-2.8
Solubility in 15% HCl @24.4ºC(76°F): ≥98%

Recommended Treatment

Typically, the products are used as blends to treat the entire drilling fluids at a total concentration of 10-50 ppb

Package

25 KG SACK
1 MT BAG

Section 7 Filtration Control Agents Reduce infiltration of the liquid phase of the drilling fluid.
No.	Product Code	SHARK	Product Description	Applications/Functions
30	DFS07-001	SHARKPAC® L	Low Viscous Polyanionic Cellulose	Filtration Control Agent for water based mud with minimal viscosity increase up to 300°F
31	DFS07-002	SHARKPAC® R	High Viscous Polyanionic Cellulose	Filtration Control and viscosifier agent for water based mud up to 300°F
32	DFS07-003	SHARKCMC® L	Low-viscosity, technical grade sodium carboxymethyl cellulose for filtration control	Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase, salinity tolarant to 50,000ppm
33	DFS07-004	SHARKCMC® H	High-viscosity, technical grade sodium carboxymethyl cellulose for filtration control and supplemental viscosity	Filtration Control and viscosifier agent for water based mud up to 250°F, salinity tolarant to 50,000ppm
34	DFS07-005	SHARKSTAR®	Pregelatinized modified starch	Filtration Control Agent for water based mud up to 250°F with minimal viscosity increase
35	DFS07-006	SHARKSTAR® HT	Modified polysaccharide/ tapioca starch	Filtration Control Agent for water based mud up to 325°F with minimal viscosity increase
36	DFS07-007	SHARKSTAR® N	Hydroxypropyl carboxymethyl starch/Cross-linked starch	Reduce filtration in reservoir sections up to 300°F
37	DFS07-008	COPOTROL®	Sodium polyacrylate copolymer	High-temp fluid loss and rhelogy stabilizer for low calcium, low solids or non-dispersed muds up to 400°F
38	DFS07-009	WHITEMP®	AAM-AMPS copolymer	HPHT filtration control for WBM up to 400°F, white free-flowing powder
39	DFS07-010	WHITETROL® X	AM - AMPS copolymer	HPHT filtration control for WBM up to 500°F, white free-flowing powder
40	DFS07-011	BLACKLEO®	Highly-oxidized leonardite	High-temp WBM fluid loss, thinner, emulsifier for oil in water emulsions up to 400°F
41	DFS07-012	BLACKFLO®	Sulfonated Lignite	Highly sulfonated lignite polymer for HT WBM fluid loss, thinner, soluble in high brines,combination with BLACKTEMP for best performance up to 400°F
42	DFS07-013	BLACKTEMP®	Sulfonated methypheuo formald-ehyde for freshwater and brine fluids	High-temp fluid loss control with minimal rheology increase used for freshwater and brine fluids up to 450°F. Salinity tolerant to 120,000ppm and calcium resistant to 2000ppm, dark brown powder
43	DFS07-014	BLACKTEMP® PLUS	Sulfonated methypheuo formald-ehyde for saturated brine	High-temp fluid loss control with minimal rheology increase used for saturated brine and formate brine up to 400°F. Salinity tolerant to 120,000ppm and Ca ion resistant to 2000ppm, dark brown powder
44	DFS07-015	BLACKNEX®	Resinated Lignite	High-temp fluid loss control and rheology stabilizer for all WBM up to 425°F with chlorides below 70,000ppm and hardness not exceeding 3,000ppm
45	DFS07-016	BLACKLIGO 400®	Organophilic leonardite	HPHT filtration control for OBM up to 400°F, alternative to asphalt and gilsonite products
46	DFS07-017	BLACKLIGO® 500	Organophilic leonardite	HPHT filtration control for OBM up to 500°F, alternative to asphalt and gilsonite products
47	DFS07-018	BLACKTROL® 350	Gilosnite - Soften point 350°F	HPHT filtration control for OBM, soften point >350°F
48	DFS07-019	BLACKTROL® 400	Gilsonite -Soften point 365-420°F	HPHT filtration control for OBM, Soften point: 365-420°F
49	DFS07-020	BLACKTROL® HP	Emulsified gilsonite - Soften point 250-420°F	HPHT filtration control for WBM, excellent dispersion, Soften point: 250-420°F
50	DFS07-021	BLACKSULA®	Sulfonated Asphalt - Economical	HPHT filtration control for both WBM and OBM up to 350°F, shale stabilizer. Prevent shale hydration and sloughing as well as decrease cuttings erosion
51	DFS07-022	BLACKSULA® PLUS	Sulfonated Asphalt - Premium	Shale stabilizer, cuttings dispersion inhibitor and contributes to high temperature fluid loss control in both WBM &OBM up to 500°F. Partially soluble in water and oil, star product for 35 years.
52	DFS07-023	LIQUITROL®	Liquid polymer for OBM	Liquid filtration reducer in NAF up to 350°F. Reduce the requirement of organoclay
53	DFS07-024	PURETROL®	Cross-linked polymer for OBM	Primary filtration control agent for HPOBM up to 300°F, alternative to amine lignite and gilsonite,white powder
54	DFS07-025	PURETROL® HT	Cross-linked polymer/Vinyl toluene-acrylate copolymer	Primary filtration control agent for HPOBM up to 500°F, alternative to amine lignite and gilsonite,white powder
55	DFS07-026	NMSHIELDTM	NANO-Technology particles	Versatile product to provide HT filtration control, improved fluids lubricity, strengthen wellbore and increase fracture breakdown pressure in sandstones and shales for both WBM and OBM up to 450°F. D50 is only 5nm.
56	DFS07-027	LIQUITROL® HT	Liquid polymer for OBM	Liquid filtration reducer in NAF up to 400°F. Reduce the requirement of organoclay.