Complaint
| PP B0730 |
| Product Description | Applications | ||||
| ·30% 30% glass fiber reinforced PP | · Injection molding | ||||
| · Excellent Heat Stability | · Good mechanical properties balance | ||||
| Properties | Test Method | Test Condition | Unit | Typical Values | |
| Specific Gravity | ISO 1183 | 23ºC | g/cm3 | 1.13 | |
| Ash | ISO 3451 | 650ºC,30min | % | 30 | |
| Mechanical properties | |||||
| Tensile Strength | ISO 527 | 50mm/min | MPa | 75 | |
| Flexural Modulus | ISO 178 | 2mm/min | MPa | 5500 | |
| Flexural Strength | ISO 178 | 2mm/min | MPa | 120 | |
| Charpy Notched Impact Strength | ISO 179-1eA | 23ºC | kJ/m2 | 13 | |
| Charpy Unotched Impact Strength | ISO 179-1eU | 23ºC | kJ/m2 | 45 | |
| Thermal properties | |||||
| Heat deflection temperature | ISO 75 | 1.80MPa | C | 135 | |
| Melting Point | DSC | - | C | 164 | |
| Other properties | |||||
| Mold Shrinkage | internal test method | 48 hours after the tool | % | 0.5-0.9 | |
| Flammability | TL1010 | - | mm/min | 28 | |
| Note: The data above is a typical value for reference, not a guaranteed value. The data will vary with tool design such as gate type, gate location, gate number, injection molding process, and part thickness. The data will vary with different colors as well. | |||||
| Processing Conditions | Range | ||||
| Melt Temperature | 210-250ºC | ||||
| Barrel Temperature | Rear | 210--220ºC | |||
| Center | 225--235ºC | ||||
| Front | 240--250ºC | ||||
| Mold Temperature | 30-50ºC | ||||
| Pre-Dry needed | 90-100ºC, 2h | ||||
| Note: The above process condition is only for reference. The actual process should be adjusted according to different types of machines, mold design, and product design. | |||||
Polypropylene (PP) products use grade :
1). Film Grade
- Biaxial Orientation Stretching Polypropylene (BOPP): mainly used in the production of high-stiffness, high transparency packaging film. It is also widely used in the production of printing and laminated film, Matt film, pearlized film, synthetic paper, cigarette film, etc
- Casting Polypropylene(CPP): It is also widely used as the packing for clothing, stationery, food, medicine, cosmetics, textiles, etc.
2). Injection Molding Grade
- PP Impact Copolymer: widely used in the production of industrial products, such as dashboard, auto interior decorations, auto bumpers, interior and exterior parts of washing machine, accumulator containers, and tanks. can also be used to make household articles, such as bottle caps, cookware, furniture, toys, toolkits, travel cases, bags, and various packaging containers.
- PP Random Copolymer: widely used in the production of medical appliances with high transparency, such as medical syringes, medical infusion bottles, medical centrifuge tubes, and sample tubes. It is used in the production of food containers, stationery, packaging materials, and houseware.
- PP Homopolymer: widely used in the production of small electrical household appliances, such as electric kettles, electric utensils, electric irons, air heaters, electric hair dryers, electric toasters, and electric hand dryers.
3). Pipe Grade
PP Pipe Grade is mainly used in the production of pipes used in building water supply systems, heating systems, and chemical piping systems. Finished Products by lightweight, corrosion resistance, long service life, thermal retardation, and recyclable processing scrap.
4). Fiber Grade
PP Fiber Grade widely used in the production of bulked continuous filament (BCF), fine and superfine staple fiber, cigarette filter tow, and superfine non-woven fabric in high-speed and ultrahigh-speed spinning and spun-bonded nonwoven fabric production.
5). Yarn Grade
PP Yarn Grade is widely used in the production of woven bags, colored stripe cloth for sunlight shading or covering use, carpet backing (base fabric), container bags, tarpaulin, and ropes.
6). Coating Grade
PP Coating Grade is mainly used for coating woven bags, tarpaulin, colored stripe cloth, and pipes.
7). Powder Grade
PP powder grade is mainly used to produce general-purpose products such as ropes, woven bags, packaging tapes, toys, daily necessities and non-woven fabric.
Are you a trading company or manufacturer?
We are a manufacturer.
About Sample?
A 5 KG Free Sample can be offered per your request.
About Material Color?
We can make the material to your appointed color according to Pantone/RAL#.
How does your factory control the quality?
Quality is the Priority, we always pay great importance to quality from beginning to end, we have professional QC for item quality from spare parts to finished goods.
How many days for mass production?
20 days after all artwork and 30% deposit are confirmed.
How can I get the samples? is the sample free?
7-10 days to send free samples by DHL, TNT, and UPS.
