Complaint
| Application | connecting a canister with a spray gun for contact adhesive application |
| Medium | contact adhesive |
| Working pressure | 22 bar |
| Working temperature | 0-190F |
1. Ensure all fittings are tight and leak free
2. No cleaning should be needed if the hose and gun remain pressurized.
3. To clean the spray adhesive gun, turn the cylinder off at the valve. Ensure there is no adhesive left in the hose and gun. Hook the hose up to a cylinder of to clean the system. Turn cylinder off and drain from the hose.
4. Use an adjustable wrench to attach the splitter to the 17kgs /22L cylinder.
5. Attach hoses to both ends of the splitter using an adjustable wrench.
| Application | connecting a canister with a spray gun for contact adhesive application |
| Medium | contact adhesive |
| Working pressure | 22 bar |
| Working temperature | 0-190F |
Wide range of operating temperatures 0°F to 190°
Low change in length at operating pressure
Lightweight
Straightforward, simple design allows for quick assembly with an adjustable wrench.
Any Length available.
The Hoses to be used in a variety of industries including solar energy, sporting goods, wind energy, composites, electronics, military, transportation, and aerospace.
