Complaint
| Items | Contents | |
| Hardware System | CPU | Industrial 32 bits CPU |
| FLASH | 1MB (Extendable to 8MB) | |
| SDRAM | 256KB(Extendable to 1MB) | |
| Interface | Serial | 1 RS232 port and 1 RS485(or RS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5(optional), 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps |
| Antenna | Cellular: Standard SMA female interface, 50 ohm GPS(optional):Standard SMA female interface, 50 ohm | |
| SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection | |
| Power | Terminal block interface, reverse-voltage and overvoltage protection | |
| Indicator | "PWR","RUN","Online","GPS"(optional) | |
| Network | Wireless Network | GSM/GPRS/EDGE:850/900/1800/1900MHz CDMA:800/1900MHz WCDMA/HSUPA/HSPA+:850/900/1900/2100MHz CDMA2000 1x/ EVDO Rev. A:800/1900MHz TD-SCDMA:1880-1920/2010-2025MHz(A/F) TDD-LTE:Band 38/39/40/41 FDD-LTE:Band 1/3/5 |
| PPP Protocol | Support PPP Protocol | |
| PPP Heartbeat | Maintaining links with the cellular network to prevent forced sleep, to ensure the stability of dial-up link. | |
| Network Authentication | Support CHAP/PAP Authentication | |
| TCP Heartbeat | Monitor the server connection | |
GPS (optional)) | Receiver Type | 50-channle GPS L1(1575.42MHz)C/A code SBAS: WAAS,EGNOS,MSAS,GAGAN |
| Max. update rate | 5 Hz | |
| Accuracy | Position: 2.5m CPE SBAS: 2.0m CPE | |
| Acquisition | Cold starts: 32S Warm starts: 32S Aided starts: <1S Hot starts: <3S | |
| Sensitivity | Tracking: -160dBm Reacquisition: -160dBm Cold starts: -146dBm | |
| Timing accuracy | RMS: 30ns 99%: <60ns Granularity: 21ns | |
| Time pulse | Configurable, 0.25 to 1000Hz | |
| Power supply | Standard Power | DC 12V/1.5A |
| Power range | DC 5~35V | |
| Communication Current | <100mA (@12VDC) | |
| Standby Current | <20mA(@12VDC) | |
| Sleep current | <10mA(@12VDC) | |
| Physical | Dimensions | 91x59x23mm |
| Weight | 175g | |
| Environmental Limits | Operating Temperature | -35~+75ºC(-31~+167ºF) |
| Storage Temperature | -40~+85ºC(-40~+185ºF) | |
| Operating Humidity | 95% ( unfreezing) | |
| Items | Contents |
| Industrial Design | High-powered industrial cellular module |
| High-powered industrial 32bits CPU | |
| Low power consumption design, support multi-sleep and trigger modes | |
| Housing: iron, providing IP30 protection | |
| Power range: DC 5~35V | |
| High Reliability | Support hardware and software WDT |
| Support auto recovery mechanism, including online detect, auto redial when offline to make it always online | |
| RS232/RS485/RS422 ports:15KV ESD protection | |
| SIM/UIM port: 15KV ESD protection | |
| Power port: reverse-voltage and overvoltage protection | |
| Antenna port: lightning protection(optional) | |
| Standard and Convenience | Adopt terminal block interface, convenient for industrial application |
| Support standard RS232/RS485 ports that can connect to serial devices directly | |
| Two RS232 interfaces can be customized | |
| TTL logic level UART interface can be customized | |
| Support intellectual mode, enter into communication state automatically when powered | |
| Support several work modes | |
| Convenient configuration and maintenance interface | |
| High-performance and Security | Support TCP server |
| Support double data centers, one main and another backup | |
| Support multi data centers and it can support 5 data centers at the same time | |
| Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout | |
| Supply 5 I/O channels, compatible 5 ADC inputs, 3 OC inputs,2 OC outputs(drive capability 20mA) | |
| Support dynamic domain name(DDNS) and IP access to data center | |
| Design with standard TCP/IP protocol stack | |
| Support APN/VPDN | |
