Made in China Industrial 4G Wireless Router for Smart Iot-Powered

Min.Order: 1
Product origin: Xiamen, Fujian, China
Infringement complaint: complaintComplaint
US$ 135 ~ 140

Description
AR7000 ROUTER is a kind of terminal device that developed based on 2G/3G/4G/5G, WIFI, VPN technology.It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, postal services,industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Detailed Photos

Product Feature
ItemsContents
Industrial DesignHigh-powered industrial cellular module
High-powered industrial 32bits CPU
Housing: iron, providing IP30 protection.
Power range: DC 5~35V
 
High Reliability
 
Support hardware and software WDT
Support auto recovery mechanism to make router always online
Ethernet port: 1.5KV magnetic isolation protection
RS232/RS485 port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and over voltage protection
Antenna port: lightning protection(optional)
 
Standard and ConvenienceSupport standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
Support standard WAN port and PPPOE protocol that can connect to ADSL directly
Support intellectual mode, enter into communication state automatically when powered
Support several work modes
Convenient configuration and maintenance interface(WEB or CLI)
 
High-performance and SecuritySupport multiple WAN access methods, including static IP, DHCP, PPPOE, 2.5G/3G/4G.
Support double link backup between 2.5G/3G/4G and WAN (optional).
Support VPN client(PPTP, L2TP,  IPSEC and GRE)(only for VPN version).
Support remote management, SYSLOG, SNMP, TELNET, SSH, HTTPS, etc.
Support local and remote firmware upgrade,import and export configure file.
Support NTP, RTC embedded.
Support multiple DDNS provider service.
Support MAC address cloning.
WIFI support 802.11b/g/n. support AP, client.
WIFI support WEP,WPA,WPA2 encryption.
Support multiple online trigger ways, including SMS, ring and data. Support link disconnection when timeout.
Support APN/VPDN.
Support multiple DHCP server and DHCP client, DHCP binding MAC address, DDNS, Firewall, NAT, DMZ host, QoS, traffic statistics, real-time display data transfer rate etc.
Support TCP/IP, UDP, FTP(optional), HTTP, etc.
Supports SPI firewall, VPN pass-through, access control, URL filtering,etc.
Support local log storage.
Support GPS (optional).
Support two SIM/UIM card (optional).
Product Specification
ItemsContents
Hardware SystemCPUIndustrial 32bits CPU
FLASH16MB (Extendable to 64MB)
SDRAM128MB
 
InterfaceWAN1 10/100Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
LAN4 10/100Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
Serial 1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space(optional), mark(optional)
Baud rate: 2400~115200 bps
AntennaCellular: Standard SMA female interface, 50 ohm
WIFI: Standard SMA male interface, 50 ohm
GPS(optional):Standard SMA female interface, 50 ohm
SIM/UIMStandard 3V/1.8V user card interface, 15KV ESD protection
PowerStandard 3-PIN power jack, reverse-voltage and over voltage protection
ResetPress this key for 8 seconds to restore the router to its original factory default settings
Indicator"Signal strength","PWR","RUN","SIM","Online","LAN1","LAN2","LAN3" ,"LAN4","WAN","WIFI","GPS"(optional),"SIM2"(optional)
 
 
NetworkWireless NetworkGSM/GPRS/EDGE: 850/900/1800/1900MHz
CDMA: 800/1900MHz
WCDMA/HSUPA/HSPA+: 850/900/1900/2100MHz
CDMA2000 1x/ EVDO Rev. A: 800/1900MHz
TD-SCDMA: 1880-1920/2010-2025MHz(A/F)
TDD-LTE: Band 38/39/40/41& Band 61/62 (Private Network)
FDD-LTE: Band 1/2/3/4/5/7/8/13/17/20/25
5G Sub-6: n2/n5/n7/n12/n14/n38/n41/n66/n71/n78
5G UL MIMO: n77/78/79/41
WANSupport PPP/PPPOE
LANSupport APR
Network AuthenticationSupport CHAP/PAP Authentication
Network AccessSupport APN/VPDN
IP ApplicationsSupport Ping,Trace,DHCPServer ,DHCP Relay, DHCP Client,DNS relay,DDNS ,Telnet
IP RoutingSupport static routing
 
GPS
(optional)
Receiver Type50-channle
GPS L1(1575.42MHz)C/A code
SBAS: WAAS,EGNOS,MSAS,GAGAN
Max. update rate5 Hz
AccuracyPosition: 2.5m CPE
SBAS: 2.0m CPE
AcquisitionCold starts: 32S
Warm starts: 32S
Aided starts: <1S
Hot starts: <3S
SensitivityTracking: -160dBm
Reacquisition: -160dBm
Cold starts: -146dBm
Timing accuracyRMS: 30ns
99%: <60ns
Granularity: 21ns
Time pulseConfigurable, 0.25 to 1000Hz
 
  WIFIStandardIEEE802.11b/g/n
BandwidthIEEE802.11b/g: 54Mbps (max)
IEEE802.11n: 150Mbps (max)
SecurityWEP, WPA, WPA2, etc. WPS (optional)
 
Power supplyStandard PowerDC 12V/1.5A
Power rangeDC 5~35V
Consumption<450mA (@12VDC)
 
Physical Dimensions186.8x120.2x28mm
Weight580g
 
Environmental Limits
 
Operating Temperature-35~+75ºC (-31~+167ºF)
Storage Temperature-40~+85ºC (-40~+185ºF)
Operating Humidity95% ( unfreezing)
 
Company Profile

Alotcer has been cultivating the Internet of Things industry for many years. It is the only manufacturer in the industry to complete all production processes such as placement, processing, assembly, testing and aging in the company. There are more than 200 employees, 3000 square meters office, 4 Panasonic fully automatic high speed SMT production lines, 3 wave soldering lines, 3 assembly& test lines in Alotcer. The product has high quality, high reliability and cost-effective features.

Product Tag:
Related categories:
Scroll to Top