0.05mm 0.1mm 0.15mm 0.2mm FEP Film DLP LCD SLA Resin 3D Printer For Wanhao Duplicator D7
FEP FilmThicknesses from 0.02mm to 0.3mm FEP Film Excellent thermal stability: Usable throughout a wide thermal range -200 to +200°C (-328 to +392°F) FEP Film Chemical Inertness: Resists almost all chemicals, such as strong acid, strong alkali, salt, and organic solvent. FEP Film Anti-stick property: The lowest surface energy of all plastic films; displays excellent mould release and anti-stick properties. FEP Film Electrical reliability: High electrical insulation characterised by low-dialectic constant and dissipation factor and by high dialectic FEP FILM strength over a wide range of temperature and frequency. * Resistance to weathering: Inert to outdoor exposure; with unchanged mechanical and physical properties after 10 years. FEP Film Usage : SLA ,DLP 3D printer · Adhesive Iron soleplate making F4 varnished belt, conveyor belt, tent head bonding F4 copper plate with middle adhesive layer F4 plate fusion welding film Windows Dielectric Making high temperature adhesive tape substrate Making capacitors Biological cryogenic protection material Non-metal compensator for thermal power plant Explosion-proof electromechanical Surface protection material Utilization characteristics: Excellent adhesion and heat sealability with F4 Below the melting point, do not allow any object to wet, above the melting point and F4, metals have good adhesion. And self-adhesive (sealing) High and low temperature resistance -200 ~ 200 ºC Non-sticky, fight water, fight oil Water contact angle: θ = 114 ºC Electrical reliability, high insulation Dielectric constant of 60HZ-60MHZ at high and low temperature is 2.1 Even if the surface is flashed and damaged, it will not produce conductive tracks. Volume resistance> 1018Ωm Surface resistance> 2 * 1013Ω Arc resistance> 165 seconds without leakage Good UV radiation permeability and low refractive index Weather resistance Long-term exposure to ozone and sunlight
Complaint
