15kVA/150kv Partial Discharge Test System Pd Free Testing Equipment

Min.Order: 1

Product origin: Wuhan, Hubei, China

Infringement complaint:

Complaint

US$ 2000 ~ 15900

Description

15kVA/150kv Partial Discharge Test System PD Free Testing Equipment

The system is consisted by below units:

PD Free Testing Control Table EPTC-15kVA 1 set
Gas Type PD Free Testing Transformer EPDW-15kVA/150kV 1 set
Isolation Transformer EPLB-15kVA 1 set
Coupling Capacitor FRC-150kV 1 set
Protective Resistor EPGR-150kV 1 set
Partial Discharge Detector EPJF-C 1 set

(Including PD Free Calibrator & Impedance Unit)

PD Free Testing Control Table EPTC-15kVA 1 set

Manual controlling.
High anti interference ability.
Real time monitoring High voltage (HV) voltage, Low voltage (LV) current, timing.
Full protection functions: over-current, zero-starting, sound light alarm, power switch protection, emergency stop button.
New type over-current relay, more accurate and reliable, to ensure the safety of the people and device.
Display: Digital.
The control unit: Table type
Both control unit and HV unit are mounted with wheels, easy to move.

Power:	AC 380V ±10%, 50Hz
Capacity:	15kVA
Rated output Voltage:	AC 0-400V
Rated output current:	37.5A
HV voltmeter range:	AC 0-150kV
HV voltmeter range:	Accuracy: 1.5% of the reading±1digit (F.S)
LV ammeter range:	0-38A
LV ammeter range:	Accuracy: 1.5% of the reading±1 digit (F.S)
Timing range:	0-9999S
Metering:	Pointer and digital display
Weight:	120kg
Dimension:	530mm(L)400mm(W)820mm (H including castors)

Gas Type PD Free Testing Transformer EPDW-15kVA/150kV 1 set

SF6 gas with high insulation strength is used as insulation medium.
Small size, light weight, high technology level, beautiful appearance, convenient transportation.
Due to the arc extinguishing performance of SF6 gas and its special process structure, its local discharge is small and ≤ 5pc under rated voltage.
The test process is simple and intuitive, and the operation is convenient.
It can effectively eliminate the clutter interference in the power supply.
It adopts automatic control technology, with high degree of automation and strong anti-interference ability.
Adopt fast electronic protection device, high reliability.

Rated Capacity:	15kVA
Input voltage:	400V
Output voltage:	0-150kV
PD volume under rated voltage	≤5PC
Output current	100mA
Voltage accuracy	AC 1.5%
Power distortion	<5%
Insulation medium	SF6 Gas
Weight:	120kg
Dimension:	450450(H)1300 mm

Partial Discharge Analyzer Model: EPJF-C 1 Set
General Information:The EPJF-C partial discharge detector (hereinafter referred to as PD) is a new generation of high-performance digital PD measurement and analysis instrument, which is implemented by new technology. It is an alternative product of the traditional analog PD instrument. Anti-interference technology of its various original so that you can accurately measure under the condition of strong interference; friendly user interface and high-speed sampling and refresh rate, with analog PD instrument visual effects; analysis, waveform records provided means to make you very easy to judge the nature of discharge; automatic recording and processing of test data that will soon be able to generate and test report; double channel embedded system, TFT touch screen, the system is stable and reliable, low failure rate. The system uses computer technology, analog electronic technology, high-speed signal acquisition technology, advanced digital signal processing and graphic display technology to complete partial discharge automatic measurement and analysis.

The discharge detector uses WINDOWS series operating platform, can choose the ellipse, straight line, sine wave display, 2D and 3D graphics analysis and spectral window and Q-V-F window on the static three-dimensional characteristics, a frequency voltage test and partial discharge pulses with measurement, observation and analysis. It can be operated by digital window, at any phase, single window and double window are chosen, ellipse is rotated at 360 degrees in order to avoid the influence of interference on measurement. Multichannel measurement and digital differential technology can flexibly make up the pulse polarity identification or balance measurement circuit, and effectively suppress the interference pulse signal. The advanced spectrum analysis can effectively reduce the background interference. A multichannel input channel, which can be boosted by six sets of signals (extensible), can easily be used to analyze the source of the signal. In the operation platform of the whole English character, the frequency band selection, the gain transformation, the spectrum analysis and the two-dimensional and three-dimensional graphic display can be conveniently carried out. In addition, the system can also print or save single graphics to save continuous time graphic data for analysis.

The discharge device applicable scope, test method, test circuit, technical performance parameters fully meet the national standard, the international standard IEC60270 High-voltage test techniques - Partial discharge measurements.

Features:

Anti-interference technology allows you to make accurate measurements in strong interference environments.
Friendly user interface and high-speed sampling refresh rate, with the visual effect of analog PD.
The various waveform analysis and recording methods provided make it easy to judge the nature of the discharge.
Automatic recording and processing of various test data can quickly generate test reports with pictures and texts.
Using dual-channel embedded system, TFT touch screen, the system is stable and reliable, and the failure rate is low.
The system comprehensively uses computer technology, analog electronic technology, high-speed signal acquisition technology and advanced digital signal processing and graphic display technology to complete automatic measurement and analysis of partial discharge.

Technical Specifications:

Number of channels	2 Electrical signal interfaces, one external synchronization interface
Sampling accuracy	12bit
Range switching	60dB, 50dB, 40dB, 30dB, 20dB, 10dB, 0dB, -10dB total 8 positions
Frequency range	80k-200kHz, 40k-300kHz
Non-linear error of this range	5%
Measuring range	0.1pC~100000pC
Sensitivity	0.1pC
Testable capacitance range	6pF~250µF
Test power frequency range	50~400Hz
Display	7" TFT True color touch LCD
Resolution	800×480
Physical storage	256MB DDR2, Running memory
SD card storage	Standard 8G card (32G is at option), used to store test records and test data
RS232	Used for synchronous transmission interface with PC
USB	Can be connected with external mouse and keyboard, as well as external mobile storage devices
Power mode	AC 220V
Electrical signal interface	2 channels BNC interface for signal input
SMA interface	External synchronization interface
SD card slot	Can support SD card up to 32G
Network port	Scalable
Ground button	For external grounding
CPU	Main frequency 533MHz
System	WINCE6.0
Working temperature	-20ºC to 45ºC
Storage temperature	-20ºC to 60ºC
Dimension	(L)350mm × (W)245mm × (H)175mm
Net weight	5.8kg

More details about Partial Discharge Test System EPPD Series please contact EPHipot Electric, we have professional tech team to design correctly designed products and systems.

Forward

Related products