Complaint
| Working wide | 2500mm |
| Paper diameter | MAX: 1600mm MIN:300mm |
| Paper width | MAX: 2550mm MIN:800mm |
| Weight capacity | 5T |
| Paper head size | Teeth 3 inches 4 inches |
| brake | Spur gear type 4 points pneumatic |
| Working air pressure | 0.4---0.8Mpa |
| ★Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive. ★The brake uses a multi-point brake system, a gear disc structure, equipped with a cooling fan, Yadeke pneumatic components, stable tension, and long life. ★The large-diameter spindle design, the swing arm slides smoothly, and the steel guide rails are treated with high frequency treatment, which is super wear-resistant. ★The hydraulic cylinder is installed on a twisted shaft, which does not bear radial force and is easy to maintain. |
| Working pressure | Hydraulic cylinder working range | Hydraulic cylinder working range | Hydraulic station motor power | Solenoid valve working voltage |
| 16---18Mpa | ¢125×440mm | ¢80×1300mm | 4KW --380V -- 50Hz | 220V--50 Hz |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Main shaft | Day steel production | ¢270mm |
| 02 | Swing arm | Production by own | Resin sand gray ironHT300 |
| 03 | Wallboard | Jigang prduction | Q235AWelding parts |
| 04 | Bearing | NSK | |
| 05 | Main electrical appliance | SIEMENS | Contactor, relay, button |
| 06 | Hydraulic station | Shandong zaozhuang | Taiwan oil pump solenoid valve |
| Track length | 10000mm |
| Paper loading method | Paper on hydraulic clamp |
| Main frame | 18 channel steel and ¢20mm cold drawn round steel |
| ★On the double position paper on design, hydraulic clamp for paper, paper unloading hydraulic push rod save manpower, hydraulic motor traction feeding trolley. ★Track buried whole, the main frame of the 18th channel, beam and ¢ 20mm drawing bar welding. ★Each paper Paper holder with both the car from both sides of the paper simultaneously. |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Track and paper trolley | TangShang or JiNan | NO18 channel steel,Q235A,steel strip |
| 02 | Bearing | C&U |
| Working wide | 2500mm |
| Link paper speed | 250m/min |
| Air pressure | 6 bpa |
| ★The maximum diameter of the applicable paper:1500mm. ★With the automatic tension control of the original paper holder, the paper can be picked up at high speed and the success rate is high. ★No tail paper receiving, reducing paper consumption (only partially overlapping paper tape with a width of 40mm). ★When paper car take out, the automatic turn out, and the vacuum adsorption, easy paper loading, automatic tension control paper receiving zero turnovers. ★All PLC automatic control, accurate, less failure, easy maintenance. ★The first round of the buffer when you pull the paper, automatic alignment, easy to pull paper. ★Machine superiority cylinder control speed splicers paper receiving moment does not appear normal motor control of rubble, blistering. ★Paper receiving highest speed of 200 m / min. |
Part name Craftsmanship | Specification | Material | Surface treatment |
| Upper paper guide shaft | ¢137mm | 45# steel | Round grinding chrome |
| Lower paper guide shaft | ¢150mm | 45# steel | Round grinding chrome |
| Buffer reel guide roller 1 | ¢126mm | 45# steel | Round grinding chrome |
| Buffer reel guide roller 2 | ¢137mm | 45# steel | Round grinding chrome |
| Pinch paper roller | ¢99mm | 45# steel | Round grinding chrome |
| Hold paper roller | ¢99mm | 45# steel | Round grinding chrome |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Breaker | Schneider | |
| 02 | Contactor | Schneider | |
| 03 | Relay | Schneider | |
| 04 | Left and right conversion solenoid valve | Japan SMC | |
| 05 | Precision pressure regulator | Japan SMC | |
| 06 | Electric proportional valve | Japan SMC | |
| 07 | Speed increase relay | Japan SMC | |
| 08 | Filter | Japan SMC | |
| 09 | Wire rope | American Smurfs | Aviation equipment |
| 10 | Sealing ring | American Parker | |
| 11 | Proximity switch | Omron Japan | |
| 12 | PLC | Taiwan Delta | |
| 13 | Geared motor | Taiwan Takasaki | |
| 14 | The electromagnetic valve | TaiWan AirTAC | |
| 15 | Cylinder | STNC |
| Working wide | 2500mm |
| Diameter of preheat roller | ¢1000mm |
| Angle adjustment range | 360° |
| Angle shaft diameter | ¢128mm×2 |
| Steam temperature | 200ºC |
| Steam pressure | 1.2Mpa |
| Working power | 380V 50Hz 3PH |
| Motor power | 300W short(S2)working system |
| ★Used for preheating single-sided corrugated paper and tissue paper to increase temperature, facilitate bonding, control moisture, and smooth cardboard. ★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable. ★Electric adjustment angle, and angle can rotation adjustment the preheat area in the range of 360°. ★The preheating roller adopts the flat head design, which complies with the national standard of Class I pressure vessels, and is accompanied by a pressure vessel certificate. |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Framework | Tang Steel Profile | Welded parts stress relief |
| 02 | Steam rotation joint | Quanzhou yujie | |
| 03 | Preheater | Hangang or jigang | Q235Bpressure container board |
| 04 | Seat belt bearing | FuJian Fu Shan | |
| 05 | RV Reducer | ShanDong DeZhou | RV75 |
| 06 | Main electrical appliances | SIEMENS | Contactor, relay, button |
| 07 | Trap | Armstrong, United States | Float |
| Working wide | 2500mm |
| Diameter of preheat roller | ¢1000mm |
| Angle adjustment range | 360° |
| Angle shaft diameter | ¢128mm×2 |
| Steam temperature | 200ºC |
| Steam pressure | 1.2Mpa |
| Working power | 380V 50Hz 3PH |
| Motor power | 300W short(S2)working system |
| ★Used for preheating single-sided corrugated paper and tissue paper to increase temperature, facilitate bonding, control moisture, and smooth cardboard. ★Each roller surface after grinding precision grinding and dealing with hard chrome plating, Surface friction is small, durable. ★Electric adjustment angle, and angle can rotation adjustment the preheat area in the range of 360°. ★The preheating roller adopts the flat head design, which complies with the national standard of Class I pressure vessels, and is accompanied by a pressure vessel certificate. |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Framework | Tang Steel Profile | Welded parts stress relief |
| 02 | Steam rotation joint | Quanzhou yujie | |
| 03 | Preheater | Hangang or jigang | Q235Bpressure container board |
| 04 | Seat belt bearing | FuJian Fu Shan | |
| 05 | RV Reducer | ShanDong DeZhou | RV75 |
| 06 | Main electrical appliances | SIEMENS | Contactor, relay, button |
| 07 | Trap | Armstrong, United States | Float |
| Working width | 2500mm |
| Design speed | 300m/min |
| Economic speed | 220-280m/min |
| Paper feed range | 2500--850mm |
| Steam temperature | 200ºC |
| Steam pressure | 1.2Mpa |
| Working power | 380V 50Hz 70KW |
| ★Main corrugating roller:¢500mm(According flute differ),pressure roller¢495mm,preheat roller¢420mm. ★Using negative pressure design, lower heat consumption, helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, because the pressure evenly, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating. ★Quickly change rollers in 10 minutes, while change corrugated roller with the electric trolley loading,put into the machine,and air pressure system will lock it,fixed to the machine base,only need a few buttons can complete the replacement quickly and easily. ★Corrugated roller adopt50CRMO high quality alloy steel, dealing with heat,after grinding tungsten carbide surface treatment. ★Corrugated roller, pressure roller adopt airbag control system having high stability, having the barometric pressure control buffering effect at the same time. ★Glue volume control with electric adjustment,rubber septum electric device,the glue system can operate independently when the motor stops,prevent glue exhausted. ★The moveable type glue unit is convenient to clean and maintain. ★Easy operation control system, touch screen operation interface,Drawing with color display operating status, function selection, fault indication, and parameter settings, etc. can exclude exhibit this machine fully functional, easy to operate, user-friendly. ★Built-in pre-conditioner with proportional spraying device, adjustment the core paper temperature and moisture. ★Main, vice corrugating and pressure roller bearings are used in high-temperature grease to ensure bearing life running smoothly. |
Part name Craftsmanship | Specification | Material | Surface treatment |
| Corrugated roller | Main roll¢500mm | 50CrMAo | Tungsten carbide treatment |
| Pressure roller | ¢600mm | 45# steel | Hardened round grinding chrome plating polishing |
| Glue roller | ¢320mm | 45# steel | Round grinding and pressing pit mesh chrome plating |
| Fixed paste roller | ¢175mm | 45# steel | Round grinding chrome |
| Preheat roller | ¢400mm | Q235B | Round grinding chrome |
| Paper guide roller | ¢110 mm | 45# steel | Round grinding chrome |
| Name | Power | Voltage | Frequency |
| Main drive motor | 55KW | 380V | 50HZ |
| High-pressure suction motor | 18.5KW | 380V | 50HZ |
| Adjustable glue push rod | 100W | 380V | 50HZ |
| Glue adjustment motor | 200W*2 | 380V | 50HZ |
| Rubber pump motor | 2.2KW | 380V | 50HZ |
| Motor of glue department | 3.7KW | 380V | 50HZ |
| Serial number | Main part name | Brand or place of origin | Remarks |
| 01 | Box rack | Self-produced | HT300 |
| 02 | Rotary joint and metal hose | FuJian | |
| 03 | Main drive motor | Siemens Bed | 30KW Inverter motor |
| 04 | RV reducer | Taiwan city-state or Wanxin | |
| 05 | Bearing | Japan NSK | |
| 06 | Seat belt bearing | FuJian | |
| 07 | High pressure fans | Shanghai yingfa | 15KW |
| 08 | Pneumatic Components | AirTac | |
| 09 | The electromagnetic valve | AirTac | |
| 10 | Low-voltage electrical appliances | SIEMENS | Contactor, relay, button |
| 11 | Frequency controller and PLC | SIEMENS | |
| 12 | Touch screen | Taiwan Weilun or Kunlun Tongtai |
| Working width | 2500mm |
| Design speed | 300m/min |
| Bridge layer | 2 layer |
| Working power | 380V 50Hz 13KW |
| ★The part of the flyover is to lift the single-sided corrugated paper produced by the single-sided machine, lift it and transport it to the glue coating machine, apply the glue to the double-sided machine, slowly convey it, and have sufficient paper storage capacity, which is convenient for changing paper and order without stopping. ★Both sides are equipped with safety barriers and security herringbone pedal operation plane is equipped with safety ladder, ensure staff safety and ease of operation. ★All roller surface after grinding hard chrome plating. ★Lifting part of independent frequency conversion drive. The high-strength jointless belt has no corrugation, and the upper layer is conveyed slowly and over a long distance, so it is not easy to break the paper. |
Part name Craftsmanship | Specification | Material | Surface treatment |
| Upper paper roller and tension roller | ¢155mm | 45# steel | Round grinding chrome |
| Conveyor roller | ¢210mm | 45# steel | Round grinding chrome |
| Paper roll and paper guide roller | ¢128mm | 45# steel | Round grinding chrome |
| Paper towing shaft | ¢155mm | 45# steel | Round grinding chrome |
| Serial number | Main part name | Brand or place of origin | Remarks |
| 01 | The bridge main skeleton | Tiangang or tanggang | NO25channel iron,NO18beam,NO12channel iron,NO63angle,60*80squal steel and so on connected. |
| 02 | Guardrail | Tiangang | Ф42mm Low pressure fluid pipe |
| 03 | Paper lifting belt | Shanghai | PVC conveyor belt |
| 04 | Cardboard conveyor belt | Hebei | Parallel transport rubber band |
| 05 | Frequency converter | TaiWan Delta | |
| 06 | Bearing | Japan NSK | |
| 07 | Seat belt bearing | FuJian | |
| 08 | Paper width adjustment reducer | Shangdong jinbuhuan reducer | |
| 09 | Paper motor(frequency) | Hebei hengshui | 7.5KW |
| 10 | Conveying roller and paper roller ,over paper roller | Tiangang Seamless steel pipe | |
| 11 | Low-voltage electrical appliances | SIEMENS | Contactor, relay, button |
| 12 | Timing belt | Ningbo | 8m |
| ★Non-contact detection corrugated. ★High precision correction paper. ★It does not require any adjustment when the width of the paper changes. ★Closed-loop control, continuous operation. ★Full size infrared LED detection, long life. ★At the same time the center and edges of the base correction. |
| ★Bridge tension control system to ensure that there is a single corrugated paper steady tension. ★Tension control manually controlled by the regulator. ★With auxiliary threading motor. In the new paper, when customer assistance. ★With the paper through the switch. Joints over time cut the tension. |
| Serial number | Names and specifications | Brand |
| Correction machine | ||
| 1 | Infrared full-frame wide light curtain FE4021 | Germany Lemmer(E+L) |
| 2 | Motor | (dunkermotoren) |
| 3 | Motor drive board | Germany Lemmer(E+L) |
| 4 | Analog-to-digital, digital-to-analog conversion board | Germany Lemmer(E+L) |
| 5 | PLC and module, display | Taiwan Yonghong |
| 6 | Small electric appliances such as buttons and air switch | Schneider Corporation of Japan |
| 7 | The electromagnetic valve | AirTac |
| 8 | Pressure gauge | SMC |
| 9 | Cylinder | AirTac |
| 10 | Pressure regulator | SMC |
| 11 | 24V Power Supplier | Taiwan Mingwei |
| Tension machine | ||
| 1 | PLC and module, display | Taiwan Yonghong |
| 2 | Paper feed motor | Taiwan Shengbang |
| 3 | Button | Schneider |
| 4 | Air switch on | Schneider |
| 5 | Contactor, thermal protector | Schneider |
| 6 | 24VPower Supplier | Taiwan Mingwei |
| 7 | Pressure regulator | SMC |
| 8 | The electromagnetic valve | SMC |
| 9 | Pressure gauge | SMC |
| Working width | 2500mm |
| Design speed | 300m/min |
| Economic speed | 200--280m/min |
| Glue volume adjustment range | 0.08-0.6mm |
| Number of anilox roller | 32 lines |
| Preheating cylinder temperature range | 150-200ºC |
| Working power | 380V 50Hz 9KW |
| Air source system | 0.4-0.9Mpa |
| Pressing method | Pneumatic |
| ★The double glue machine is a corrugated paper conveyed from the flyover. After preheating, it is coated again with glue and then pasted into the double-sided machine to paste and bond to produce three-layer five-layer cardboard. ★Frame cast iron structure, stable performance, upper middle layer preheater diameter 400mm, increase paper temperature to facilitate glue paste, double pressure roller design glue evenly, stainless steel glue groove, automatic circulation glue supply. ★after quenched of the glue roller surface,the hole machining, surface grinding and doing balancing engraved anilox pit type, coating evenly, less consumption of plastic. ★The transmission of the glue unit is directly connected by the frequency conversion motor through the reducer, and the frequency conversion control ensures that the linear speed of the glue roller is synchronized with the double-sided machine and can operate independently. Use angle sensor, PLC, touch screen man-machine interface display. According to different paper quality, different speeds automatically control the amount of glue, according to the different corrugated shape automatically adjust the gap between the pressure rollers, without accumulating errors. |
Part name Craftsmanship | Specification | Surface treatment |
| Glue roller | ¢320mm | Round grinding and pressing pit mesh chrome plating |
| Fixed paste roller | ¢155mm | Round grinding chrome |
| Pressure roller | ¢150mm | Round grinding chrome |
| Paper shaft | ¢128mm | Round grinding chrome |
| Preheating cylinder | ¢400mm | Round grinding chrome |
| Name | Power | Voltage | Frequency |
| Rubber roller active motor | 4KW*2 | 380V | 50HZ |
| Glue adjustment speed reducer | 200W | 380V | 50HZ |
| Roller gap adjustment motor | 200W | 380V | 50HZ |
| Rubber pump motor | 2.2KW | 380V | 50HZ |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Glue roller and paste roller | Tiangang | 45# steel |
| 02 | Preheat roller | Tiangang or Jigang | Q235B Container board |
| 03 | Bearing | Japan NSK | |
| 04 | Bearing with seat | FuJian | |
| 05 | Pneumatic Components | AirTac | |
| 06 | Low-voltage electrical appliances | SIEMENS | Contactor, relay, button |
| 07 | Glue reducer | Taiwan city-state or Wanxin | |
| 08 | Main reducer | Taiwan city-state or Wanxin | |
| 09 | Touch screen | Taiwan Vinylon or Kunlun Tongtai | 10.4 inch |
| 10 | PLC and inverter | SIEMENS | |
| 11 | Timing belt | Germany OPTIBELT | |
| 12 | Trap | Armstrong, United States | Float |
| Working width | 2500mm |
| Design speed | 300m/min |
| Economic speed | 180-290mmin |
| Hot plate number | 600mm×18 piece |
| Cooling section length | 5 meters |
| Temperature requirements | 160-200ºC |
| Steam pressure | 0.8-1.3Mpa |
| Air pressure | 0.5-0.6Mpa |
| Pneumatic pressure plate | 14 groups |
| Working power | 380V 50Hz 90KW |
| ★The double-sided machine is a glued single-sided corrugated paper and facial paper laminated, heated platen heating, glue paste, stereotypes to produce flat cardboard. ★Surface of hot plate is dealed with grinding, hot plate width600mm,in total 20 pieces hot plate,Minister cooling stereotypes 5m. Hot plate is made adopt container board, enclosed pressure container certificate and inspection certificate.Internal thermal panels for partition isolation structure,s-shaped flow of steam, Steam, water separation function apparent,improve the using rate of steam. ★The hot plate adopts pneumatic pressure plate structure. The pressure plate lifting adopts pneumatic structure. 14 sets of spring pneumatic pressure plates are standard. ★The heat pipe of the heating plate controls the temperature in multiple sections and has a temperature display. ★The upper cotton webbing is automatically centered by the correcting pneumatic valve, and the double cylinder is used to control the S-shaped cotton web tensioning device. The amount of tightening is large. ★The lower belt adopts pneumatic tensioning mechanism, the structure is simple and practical, the left and right of the lower conveyor belt is automatically corrected and aligned, and it can also be adjusted manually on both sides. ★Gearbox drive unit using an independent structure, gear steel ZG-500 number for materials, the use of oil-immersed gear lubrication. ★Electrical components used internationally renowned brands, the device stable and reliable operation. ★Main drive motor for the motor frequency energy, low-speed torque, wide speed range, reliable, easy maintenance. ★The main backbone of high intensity profiles GB, solid structure, beautiful appearance, suitable for high speed working. |
Part name Craftsmanship | Specification | Surface treatment |
| Upper drive rubber roller | ¢800mm | Covered with wear-resistant rubber |
| Lower drive rubber roller | ¢600mm | Covered with wear-resistant rubber |
| Front and rear driven belt roller | ¢215mm | Round grinding chrome plating polishing |
| Top tension roller | ¢155mm | Round grinding chrome plating polishing |
| Upper belt adjustment roller | ¢130mm | Round grinding chrome plating polishing |
| Name | Power | Voltage | Frequency |
| Main drive motor | 90KW | 380V | 50HZ |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Main skeleton | Tiangang or lai gang production profiles | NO.36channel and NO.16 I-beam |
| 02 | Drive wallboard | HeBei HanDan | Q345 |
| 03 | Heat board | Tiangang or Jigang | Q235B container board made |
| 04 | Main drive motor | Siemens Bed | 75KW Frequency motor |
| 05 | Cotton webbing | ShenYang | Cotton webbing thickness:9mm |
| 06 | Trap | Armstrong, United States | Float |
| 07 | Low-voltage electrical appliances | SIEMENS | Contactor, relay, button |
| 08 | Pneumatic Components | AirTac or sono | |
| 09 | Frequency converter | SIEMENS | |
| 11 | Bearing | Japan NSK | |
| 12 | Bearing with seat | FuJian |
| Working width | 2500mm |
| Design speed | 300m/min |
| Economic speed | 220-280m/min |
| Mechanical configuration | 7 Knife 12 lines |
| Min cutting width | 140mm |
| Minimum indentation distance | 0mm |
| Cutter wheel positioning accuracy | ±0.5mm |
| Horizontal movement of the whole machine | ±100mm |
| ★The synchronous servo motor controls the row of knives and wires. Automatic reset. Precise size. Change order time is 15 seconds. The two machines can be used to change orders immediately without slowing down. ★ PLC control system, using CANopen bus system, with order management function, equipped with a synchronous signal input interface with dryer speed. ★HMI with 10.4-inch color touch screen, storage 999 orders, change orders automatically or manually for a single, fault alarm. ★Three kinds of pressure line forms:Convex against the concave(three layers line),Convex against the concave(five layers line),Convex against Flat,Three kinds of electric pressure line forms can be converted.Crimping round shades by computer control,linear, and easy to bend. ★Using thin tungsten alloy steel knife,sharp blade,long life of more than 8 million meters. knife sharpener for computer control,automatic or manual knife sharpener,Cutting edge sharpening can be divided,improve productivity Efficiency. ★Imported synchronous belt transmission is adopted, and the thin blade holder and the crimping seat are supported by linear bearings, and the positioning size is accurate without accumulating errors. ★The cutting and crimping are driven by independent frequency conversion motors. The suction port is automatically positioned with the change order. ★With gas storage tank and low pressure protection function. |
| Name | Power | Voltage | Frequency |
| Row of single-pole servo motors | 0.45KW | 380V | 50HZ |
| Slitting inverter motor | 7.5KW | 380V | 50HZ |
| Pressure line frequency conversion motor | 7.5KW | 380V | 50HZ |
| Suction outlet frequency conversion motor | 0.55KW | 380v | 50HZ |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Frame | ShanDong JiNan | Q345 |
| 02 | Rail beam | TianJin | Q345 |
| 03 | PLC Programming controller | Schneider | CANopen Bus system |
| 04 | HMI | Kinco | 10.4 inch |
| 05 | Row knife servo control | Kinco | 500w |
| 06 | Row line servo control | Kinco | 500w |
| 07 | Line change control | Kinco | 500w |
| 08 | Suction control | Kinco | 500w |
| 09 | Proximity switch, photoelectric switch | Japan omron | |
| 10 | Relay | Schneider | |
| 11 | Main frequency conversion motor | HeBei | 5.5KW×2 |
| 12 | Horizontal motor | Shandong Jinzhan Reducer | |
| 13 | Suction exhaust motor | ZheJiang | 0.55kw |
| 14 | Solenoid valve, cylinder | AirTac | |
| 15 | Bearing | HRB or C&U | |
| 16 | Bearing with seat | ZheJiang Wuhuan | |
| 17 | Tungsten alloy blade | Sichuan Boyan | ¢260mm |
| 18 | Linear Guides | TaiWan | ShangYin |
| Working width | 2500mm |
| Design speed | 300m/min |
| Economic speed | 220-280m/min |
| Min. cutting length | 500mm |
| Max. cutting length | 9999mm |
| Cutting accuracy | ±1mm, |
| Working power | 380V 50Hz |
| ★It can store 200 units orders,replace the cutter specifications quickly and accurately,changing orders without stop,And enables networked computers to facilitate production management. ★Knife shaft drive gears are precision forged steel induction hardening, backlash-free transmission, advanced keyless connection, high transmission accuracy. ★Cutting machine adopts inlaid front steel blade knife spiral structure, serrated knife. scissors, shears, shear force, long blade life. ★Around feed rollers are used the sun gear platen way, smooth delivery, pressure evenly, easy to crush plate board or cause blockage. ★This model is the braking energy storage (non-dynamic braking), so the energy consumption in the production process, the average electricity consumption is 1/3 of an ordinary NC cutting machine, saving more than 70% power to reach the goal of saving money . ★Precision adjustable no gap gear to ensure precise blade engagement, running balance. ★Using an independent oil pump and filter with two copper distribution in each gear position oil, lubrication and cooling. ★Knife roller: fine quality forged steel material, the balanced, with good stability. |
Part name Craftsmanship | Specification | Surface treatment | Special treatment |
| Cross cutting the upper and lower knife axis | ¢216mm | Conditioning | Dynamic balance |
| Front lower conveying roller | ¢156mm | Round grinding chrome plating polishing | Dynamic balance |
| Rear lower conveyor roller | ¢156mm | Round grinding chrome plating polishing | Dynamic balance |
| Paper shaft | ¢160mm | Wrapped silicone | Dynamic balance |
| Output sun gear | ¢160mm | Polyurethane | Intensive |
| Name | Power | Voltage | Frequency |
| Main drive servo motor | 37KW *2 | 380V | 50HZ |
| Front feed motor | 3KW*4(Frequency adjustment speed) | 380V | 50HZ |
| Rear feed motor | 3KW*4(Frequency adjustment speed) | 380V | 50HZ |
| Lubricating oil pump motor | 0.18KW*4 | 380V | 50HZ |
| Serial number | Name of main parts | Brands or place of origin | Remarks |
| 01 | Box rack | Self-produced | HT300 |
| 02 | Knife roll | Tiangang Precision Forging | 42CrMo |
| 03 | Full AC servo motor | Shanghai Futian | 37KW |
| 04 | Paper frequency conversion motor | Siemens Bed | |
| 05 | Flying shear servo control system | Kobe, Germany | |
| 06 | Motion control board | Germany MKS-CT150 | |
| 07 | Rotary encoder | Germany SIKI | |
| 08 | Timing belt | Obi, Germany OPTIBELT | |
| 09 | Tightening sleeve | XianYang ChaoYue | |
| 10 | Bearing with seat | FuJian | |
| 11 | Low-voltage electrical appliances | SIEMENS | Contactor, relay, button |
| 12 | Proximity switch | Omron Japan OMRON | |
| 13 | Frequency converter | SIEMENS | |
| 14 | HMI | Kunlun State | |
| 15 | Sun gear | ShenZhen |
| Working width | 2500mm |
| Design speed | 300m/min |
| Economic speed | 180-280m/min |
| Maximum stacking length | 3500mm |
| Maximum stacking height | 300mm |
| Working power | 380V 50Hz 17KW |
| Equipment size | 13m*2.5m*2.2m |
| ★Gantry stacking,Changing single time is 5seconds,automatic counting, automatic cross out automatically for a single. ★Synchronized with the production management system,order management,Centralized management,do not slow down automatically for a single. ★Production management for a single waste less than 700mm. ★Crawler stacking platform,AC servo control movements,Stacking smooth, neat. ★When stacking reaches a set number of automatic frequency control smooth laterally out of paper. ★Tailgate AC servo control positioning for a single automatic, rapid, precise adjustment. ★Tailgate automatically shift for small orders stacking. ★The conveying side is equipped with an electric conveying rack as standard, and a double station trolley. ★Independent sealed control cabinets, electrical equipment operating under clean environment. ★Color touch-screen display for easy on-site operation. ★Fully automatic operation control, improve efficiency and save manpower, reduce labor intensity. |
| Name | Power | Voltage | Frequency |
| Main conveying motor | 3KW*3 | 380V | 50HZ |
| Suction motor | 3KW | 380V | 50HZ |
| Horizontal conveyor motor | 3KW | 380V | 50HZ |
| Tailgate motor | 0.75KW | 380V | 50HZ |
DONGGUANG XINGLONG PACKAGING MACHINERY CO., LTD. is specialized in the production of various kinds of carton equipments of the well-know enterprise.
Factory for over twenty years, we introduced advanced technology at home and abroad, developing and manufacturing products, has been well received by customer.
We are specialized in producing 3ply, 5ply, 7ply corrugated cardboard production line, high speed printing machine, ordinary printing machine, single facer, rotary die cutter and other corrugated cardboard production equipment .products are distributed Russia ,the Middle East, Africa, Southeast Asia, EU and other countries and throughout the country. Product quality and enterprise reputation get the high praise at home and abroad.
Over the years the company take "the quality first" "integrity-based" corporate purpose always meet user're-equipments as our sole purpose, providing the products with excellent quality, professional technology. Our company is willing to cooperate with domestic and foreign insight, strive for innovation, coexist win-win, hand in hand altogether will create packaging future.
1. Q: Are you a manufacturer, trading company or a third party?
A: We are a manufacturer, located in Mahai industrial area south of Dongguang county, Hebei province, China. Warmly welcome to visit our company.
2. Q: What is your minimum order quantity, can you send me samples?
A: Our minimum quantity is 1 set, as our product is machinery equipment, it's difficult to send you samples, if you have any questions about the products, please feel free to contact us for more detail, we are glad to provide you more information such as specifications, video, etc.
3. Q: How does your factory do regarding quality controlling?
A: 1) All raw material we used are environmental-friendly
2) Skillful workers care every details in handling the producing and packing process
3) Quality control department are specially responsible for quality in each process
We have been kept providing high quality products by introducing advanced technologies for over 20 years, and our products are also widely exported to many different countries including Russia, the Middle East, Africa, Southeast Asia, EU, etc, which earned us a high reputation among the customers.
4. Q: How about the after-sale service?
A: 1) TM online for 24 hours, also contact by email, skype, MSN, whatsapp, etc.
2) To solve the problems with videos/pictures.
3) One year warranty for spare parts change.
