Complaint
Metal steel Pipe tube,Channel steel,H-beam I-beam CNC plasma cutter Robort plasma beam cutting machine
Introduction:
12000mmX1200mm/800mm CNC intersecting wire cutting machine It is mainly used for cutting various low carbon steel, stainless steel, copper, aluminum and other pipes. . It can cut the end surface of the round pipe, the intersection surface of the circular pipe and the plane, and the various round and circular pipes, the circular pipe and the spherical surface, the surface where the circular pipe and the curved surface intersect, the H-shaped steel channel steel, the rectangular pipe and the square pipe. The model is beautiful in appearance, compact in structure, stable in operation and easy to operate. The cutting pipe diameter ranges from 1200 to 50 mm and the cutting pipe length ranges from 12 m.
The mechanical part of the machine is mainly composed of a work table, a power chuck and a cutting head. The worktable and the power chuck adopt the overall design and mechanically complete machining, so that the longitudinal guide rail and the shaft of the power chuck are kept parallel, which greatly improves the working precision of the machine. Two parallel linear guide rails are mounted on the side of the workbench, and precise racks are mounted between the guide rails, and the gears are driven by the drive system on the moving body to realize the longitudinal gear and the rack drive. The power chuck drives the chuck to rotate through the servo motor and the timing pulley, and the workpiece is driven by the chuck to realize the forward and reverse rotation. The cutting head is controlled by an imported dual servo motor for axial and radial deflection. The linkage of these motion axes is controlled by the system to achieve the cutting of the intersecting lines of the tubes.
- Length 12000mm
- Diameter: 800mm/1200mm
- 200A/300A HUAYUAN plasma power supply
- Auto feeding system: 12000
- EOE-01A control system
- EOE software (support Tekla software)
- Japan Yaskawa servo motor and driver
- Taiwan HIWIN square rail guide
- Taiwan TBI ball screw
- table: heavy duty steel frame
- Marking head for engraving
| Controller | professional pipe cutting control system |
| Adjustment | High sensitivity arc voltage adjustment, cutting more accurate, easier to use |
| Cutting Power | 300A HUAYUAN plasma power supply |
| Cutting head | Plasma cutting head |
| Marking | Marking head for engraving |
| Cutting body | Robort cutting |
| Robot arm length | 1800MM |
| Motor system | Japan Yaskawa servo motor and driver system |
| Ruducer | From Japan |
| Table | Auto feeding system |
| Body protection | Anti-rust treatment |
| Extral parts | 20 sets of Nozzle electrodes and 2 marking heads |
| Auxiliary equipment | Compressor |
| Protective parts | Professional goggles and protective gloves |
Control system features
* Industrial control CNC control, powerful, and scalable
* Hardware board interpolation, stable and reliable, simple wiring
* Support manual box operation to improve production efficiency
* Supports three operating modes of flame/plasma/demo, easy to switch
* You can use the file to set the speed, or use the system to set the speed.
* File speed setting supports line speed and composite speed
* Automatically introduce pipe diameter, safe and reliable
* Display the maximum size of the processing graphics, intuitive and convenient
* It can be used as a zero return switch, which is simple and convenient.
* The processing start positioning is simple, no need to consider the swing axis
* Forward and backward in machining, offset back
* Parameter backup and parameter restoration.
* The optional hole starts cutting, which is convenient and quick.
Application and Sample
It is mainly used for cutting various low carbon steel, stainless steel, copper, aluminum and other pipes. . It can cut the end surface of the round pipe, the intersection surface of the circular pipe and the plane, and the various round and circular pipes, the circular pipe and the spherical surface, the surface where the circular pipe and the curved surface intersect, the H-shaped steel channel steel, the rectangular pipe and the square pipe. The model is beautiful in appearance, compact in structure, stable in operation and easy to operate. The cutting pipe diameter ranges from 1200 to 50 mm and the cutting pipe length ranges from 12 m.
Choose suitable plasma power LG-163-LG-400 for cnc cutter
| Item | Unit | Models | |||||
| LGK-63IGBT | LGK-100IGBT | LGK-120IGBT | LGK-200IGBT | LGK-300IGBT | LGK-400IGBT | ||
| Input Power | V/Hz | 3~ 380V± 15% 50/60 Hz | |||||
| Rated Input capacity | KVA | 9.5 | 17.8 | 22.2 | 38.8 | 70.1 | 93.5 |
| Rated Input Current | A | 14.5 | 27 | 34 | 71 | 100 | 138 |
| Rated Open Circuit Voltage | V | 300 | 300 | 300 | 315 | 380 | 380 |
| Rated Cutting Current | A | 63 | 100 | 120 | 200 | 300 | 400 |
| Rated Cutting Voltage | V | 106 | 120 | 128 | 160 | 200 | 200 |
| Current Adj Range | A | 30~63 | 30~100 | 30~120 | 40~200 | 60~300 | 60~400 |
| Max Cut Thickness(Steel) | mm | 25 | 40 | 45 | 65 | 80 | 90 |
| Quality Cutting Thickness (Steel, hand-held) | mm | 0.3~12 | 0.3~22 | 0.3~25 | 1~45 | 1~50 | 1~50 |
| Quality Cutting Thickness (Steel, machine) | mm | 6 | 12 | 15 | 25 | 35 | 40 |
| Plasma gas | - | Compressed Air | |||||
| Air Pressure | Mpa | 0.3~0.5 | 0.45~0.6 | 0.45~0.6 | |||
| Output Signal of Arc Voltage | - | 1: 1 / 1: 20 1: 50 / 1: 100 Arc Voltage | |||||
| Cutting Torch Cooling Mode | - | Air cooling | Air cooling/Water cooling | ||||
| Rated Duty Cycle | % | 60/40° C | 100/40° C | ||||
| Insulation Grade | - | F | |||||
| Protection Grade | - | IP21S | |||||
| Dimensions(L× W× H) | mm | 585x280x485 | 695× 320× 580 | 800× 380× 810 | 890× 420× 900 | ||
| Power Source N. W. | Kg | 26 | 51 | 52 | 82 | 140 | 145 |
