FINCM Pressure Vessel Boiler Heat Exchanger CNC Gantry Movable High Speed Tube Plate Flange Drilling Machine

Min.Order: 1

Product origin: Jinan, Shandong, China

Infringement complaint:

Complaint

US$ 300000 ~ 305000

Description

PHM5050C/2 FINCM Tubesheet Flange Fabrication CNC Gantry Movable Plate High-Speed Drilling Machine 5000mm*5000mm*250mm

PHM5050C/2 top manufacturer CNC drilling machine for steel plates .

Machine Purpose:
Mainly Drilling tube sheet plates and flanges, the drilling hole diameter is less thanφ80mm. The main function includes drilling holes, reaming, boring, tapping, chamfering, and milling. It's applicable to take both carbide drill bit and drill bit. The CNC control system's operation is convenient and easy. The machine has very high work accuracy.

Machine's Supply Range:

No.	Name	Qty.
1	Machine Frame	1 set
2	Column	1 set
3	Cross beam	1 set
4	Worktable	1 set
5	Ram-type drilling Spindle and headstock	2set
6	Hydraulic System	1 set
7	Electrical Control System	1 set
8	Centralized Lubrication System	1 set
9	Scrap Removal System	1 set
10	Cooling System	1 set
11	Pneumatic system	1 set

Machine Features:

    The machine frame body and cross beam are in welded fabricated structure, after enough aging heat treatment, with very good accuracy. The work table, transversal sliding table and ram all are made from cast iron.
    Two sides'dual servo driving system at X axis assures the gantry's parallel accurate movement, and the good squareness of Y axis and X axis.
    The work table is made from cast iron, assures stable performance.
    The Drilling spindle is rigid high precise BT50 type with inner cooling system, and easy to change tools. The spindle speed is 30~3000r/min.
    At the two sides of the work table there are total two plate-chain type scrap removal device, the scrap and cooling liquid can be collected to the device, and the coolant can be recycling used.
    The machine has two cooling ways - inner cooling and outside cooling, enough pressure and flow rate, and there is coolant level inspection warning components, which assures enough lubricating and cooling for the drilling tool.
    The machine has automatic lubricating system, provides enough and reliable lubricating for the key movement points, such as guide rail, ball screw and roller bearings, which assures the key movable components' lifetime.
    The CNC Control system is Siemens828D , with powerful function, automatic CAD-CAM programming, easy operation, automatic warning and error compensation.
    The key outsourced components, such as linear roller guide rail, ball screw, servo motor and servo driver, spindle, CNC control system, hydraulic pump, valve and cooling pump, etc., all are from world famous brand, so the machine has very high reliability and stable performance.

Main technical specifications:

Item	Name	Value
Maximum Plate Size	L x W	5000×5000 mm
Maximum Plate Size	Maximum Thickness	250mm(can be extended to 380mm)
Work Table	T Slot Width	28 mm(standard)
	T Slot Direction	Y Axis
	Loading Weight	3 tons/square meter
Drilling Spindle	Maximum Drilling Diameter	φ80 mm
	Drilling spindle's Rod Length vs. Hole diameter	≤10,(Crown Diamond)
	Maximum Tapping screw	M30
	RPM	30~3000 r/min
	Spindle Tape	BT50
	Spindle motor power	2×37kW
	Maximum Torque n≤750r/min	470Nm
	Distance from Spindle bottom surface to the worktable	280~780 mm (adjustable as per material thickness)
Gantry Longitudinal Movement (X Axis)	Max. Travel	5000 mm
	Movement speed along X axis	0~16m/min
	Servo motor power of X axis	2×3.3kW
Spindle Transversal Movement (Y Axis)	Max. Travel	5000mm
	Movement speed along Y axis	0~16m/min
	Servo motor power of X axis	2×2.7kW
Spindle Feeding Movement (Z Axis)	Maximum distance between two drilling headstocks	500 mm
	Feeding speed of Z axis	0~10m/min
	Servo motor power of Z axis	2×4.3kW
Positioning accuracy	X axis,Y axis	0.08mm/full travel
Repeatable positioning accuracy	X axis,Y axis	0.05mm/full travel
Hydraulic system	Hydraulic pressure/Flow rate	15MPa /22L/min
Hydraulic system	Hydraulic pump motor power	5.5 kW
Pneumatic system	Compressed air pressure	0.5 MPa
Scrap removal and Cooling system	Scrap removal tpe	Plate chain
	Scrap removal Nos.	2
	Scrap removal speed	1m/min
	Motor Power	2×0.75kW
	Cooling way	Inner cooling + Outside cooling
	Max. Pressure	2MPa
	Max. Flow rate	2×60L/min
Electronic system	CNC control system	Siemens 828D
	CNC Axis Nos.	6
	Total power	About 110kW
Overall Dimension	L×W×H	About 9.8×8.7×4.1m
Machine weight		About 50t

Key outsourced components list:

No.	Name	Brand	Country
1	Roller linear guide rail	Hiwin/PMI	China Taiwan
2	CNC control system	Siemens	Germany
3	Feeding servo motor and servo driver	Siemens	Germany
4	Precise spindle	Spintech/Kenturn	China Taiwan
5	Hydraulic valve	Yuken/Justmark	Japan/China Taiwan
6	Oil pump	Justmark	China Taiwan
7	Automatic lubricating system	Herg	Japan
8	Button, Indicator, low voltage electronic components	ABB	Germany

Note: The above is our fixed supplier. It's subject to be replaced by same quality components of other brand if the above supplier can't supply the components due to any special matter.

Free Accessories list:

No.	Name	Size	Qty.
1	Optical edge finder		1 piece
2	Inner hexagon wrench		1 set
3	Tool holder and pull stud	Φ40-BT50	2 pcs
4	Tool holder and pull stud	Φ20-BT50	1 piece
5	Spare paints	--	2 kegs

Work Environment:

1) Power supply:                         3 phase 5 lines    380±10%V 50±1HZ
2) Compressed air pressure:      ≥0.5MPa
3) Temperature:                          0-40°C
4) Humidity:                               ≤75%

Shandong FIN CNC MACHINE CO., LTD. is always focusing on our ultimate goal - to secure and increase our customer's productivity - has made us the leader in China market in the manufacture of machines for processing angle bar, beam channel profiles, steel plates, tubesheet and flanges, mainly serving for fabricating iron towers, steel structure, heat exchangers, boilers, bridges, and trucks.Strong R & D center with 30 engineers team, 24 years of experience from year 1997, 280 staff, plant area about 270,000 sqm., very harsh quality control of every component and the whole machine, about 40 million US dollars sales turnover per year.FIN CNC machines' market share in China is around 70% and exported to 50+ countries across globe market. All top ranked tower manufacturers, steel structure fabricators and power station makers, bridge/railway manufacturers, truck makers are our clients.
   Main products: CNC Angle Line, CNC Beam Drilling Sawing Machine, CNC Plate Drilling Machine, CNC Rail Processing Machine, CNC Tubesheet Flange Drilling Machine, Truck beam plate punching machine, etc..
   One measure of the outstanding quality of our machines is their longevity: many FIN machines have been in operation for more than 17 years! Many clients are continually placing repeated orders which verified well our machines' perfect quality and reliable performance.
   The company drafted many China national standards for CNC angle line machine and CNC beam drilling sawing machine and CNC plate drilling machine.

1. When can you arrange shipment?

For machines available in stock, the shipment can be arranged within 15 days after getting advance payment or L/C;
For machines non available in stock, the shipment can be arranged with 60 days after getting advance payment or L/C.

2. What can you do if my machines have problems?

1) We can send you free components if machines are in warranty period;
2) 24 hours service on line;
3) We can assign our engineers to serve you if you want.

3. Do you provide machine operation training?

Yes. We can send professional engineers to the working site for machine's installation, commissioning and operation training.

4. Which machine model shall I choose when I purchase from you?

Please share us your material size and your processing request, then we will recommend our machine most suitable and most cost effective for your work demand.

5. What's your machine's market share in China?

Our market share in China is about 70%+, and we've exported to 50+ countries across the globe market, since year 1998.

Forward

Related products

Deep Hole Drilling Machine FINCM CNC Boiler Heat Exchanger Tube Sheet Wind Power Flange CNC High-Speed Plate Drilling Machine

US$ 340000 ~ 345000

High Efficiency Boiler Tube Pressure Vessel Heat Exchanger High Efficiency Tube

US$ 1.5 ~ 33

CNC Steel Plates High Speed Drilling Machine Tube Plate Steel Structure Heat Exchanger Worktable Drilling Moveable Moveing Drilling Facility Fabrication Factory

US$ 40000 ~ 60000

Gantry Moveable CNC Plate Drilling Millingmachine Tool Worktable Drilling Equipment Tube Sheet Steel Structure Heat Exchanger Vertical Drilling

US$ 25000 ~ 40000

CNC High Speed Plate Drilling Punching Marking Machine FINCM CNC Hydraulic Punch Machine Hole Punching

US$ 45000 ~ 46000

CNC Gantry Movable Drilling Machine

US$ -1

Tat3030 Gantry Type CNC Steel Plate Flange Drilling Machine Tube Sheet

US$ 51500 ~ 54500

Customized High Pressure Vessel Tube Heat Exchanger for Sale

US$ 1000

Customers Also viewed

HD1715D/3 FINCM CNC Pressure Vessel Boiler Drum Horizontal Three-spindles Power Head Mobile Sprial/Auger/Twist Drilling Machine 780*2000*50mm-1700*15000*5mm

US$ 305000 ~ 307000