Description
Home Battery Energy Storage E5B 48V100Ah Lifepo4 Battery
Product Images:
Product Description
Product characteristics NO | Projects | Specification | Remark | |
Cell Unit Parameter | |
1 | Battery types and materials | LiFePO4 | / | |
2 | Rated voltage/capacity | 3.2V/100Ah | / | |
3 | Single battery voltage range | 2.5V~3.65V | / | |
4 | Single battery weight | 2.15Kg | / | |
5 | The battery internal resistance | ≤ 0.05mΩ | / | |
6 | Battery size | 29*148*98mm | / | |
Battery parameter | |
1 | Rated voltage | 51.2V | / | |
2 | Rated capacity | 100Ah | / | |
3 | Battery pack voltage range | 58.4~40V | / | |
4 | Total Power(kWh) | 5120Wh | / | |
5 | Combination | 1P16S | / | |
6 | Insulation resistance test value(Ω) | ≤60mΩ | / | |
7 | Operating temperature | Charging 0 ~ 45ºC; Discharging -10 ~ 50ºC | / | |
8 | Standard charging current | 0.5C | / | |
9 | Quick charging current | 1.0C | / | |
10 | Standard discharge current | 1.0C | / | |
11 | Maximum continuous discharge current | 2.0C | 10S | |
12 | Gross weight | Approx.≈52KG | / | |
13 | Ambient relative humidity | 25-85%RH | / | |
14 | Battery size | 635*400*165mm(±2mm) | / | |
15 | Open circuit voltage | Open circuit voltage measured within 24 hours after standard charge | ≥51V | |
16 | Capacity retention | Fully charging, store them at (20±5)ºC for 28 days, then discharge to 40V @0.2C. | ≥300min Discharging time≥300min | |
|
17 | Cycle Life@25ºC | Discharge to 40V @0.2C, then Charge the battery @0.2C to reach 58V. Then charge the battery at constant58.4V voltage until the charging current decreasing to 0.02C. Rest for 10 min. discharge to 40V@ 0.2C and rest for 10 min. Continue the charge/discharge cycles until discharge capacity lower than 80% of rated capacity. | Cycles life≥4000 | |
18 | storage | Charge the battery to 40%~65% of its rated capacity using standard charging mode, then keep it in an 20ºC±5ºC, humidity 45%~85% room for 12months,fully charge and discharge it @0.2C untilvoltage down .(The testing sample should be within3 months dated from production date) | ≥300min Discharge time≥360min | |
System Schematic Diagram
Packing information
Carton Size : 700*465*215mm
Carton packing weight:49KG
Packing size of wooden case: 730*495*355mm
Packing weight in wooden case:56KG
Packing quantity of 20 foot container: 360PCS
Packing quantity of 40 foot container:530PCS
Storage and Transportation
Storage
The Li-ion battery pack should be stored in a cool, dry and well-ventilated area, and should be far from the fire and the high temperature.
The battery should store in the product specification book stipulation temperature range, the best storage temperature is 25±5ºC. The best humidity is 60±15%.
The battery should be stored within room temperature, and charged to 40%~60% electric quantity. In order to avoid over-discharge, we suggest charge and discharge the batteries every three months, then charge to 40%~60%electric quantity .
Transportation
Don't put the battery product mix with other goods.
Do not immerse the battery products in water or allow it to get wet.
Do not over 1 layers staking and upside-down.
The highest temperature in transportation is lower than 65ºC.
Warning
Do not immerse the battery in water or allow it to get wet.
Do not use or store the battery near sources of heat such as a fire or heater.
Do not reverse the positive(+) and negative(-) terminals.
Do not connect the battery directly to wall outlets or car cigarette-lighter sockets.
Do not put the battery into a fire or apply direct heat to it.
Do not short-circuit the battery by connecting wires or other metal objects to the positive(+)and negative(-) terminals.
Do not pierce the battery casing with a nail or other sharp object, break it open with a hammer,or step on it.
Do not strike, throw or subject the battery to sever physical shock.
Do not attempt to disassemble or modify the battery in any way.
Do not place the battery in a microwave oven or pressurized containe