Description
Production line characteristic
1 )JCT machinery and Equipment Co., Ltd. is a professional manufacturer specializing in design, production, installation and commissioning. It has more than 20 years of design and production experience, advanced design, well made,the products are sold to all over the world..
2)The grafted adhesive production line designed by JCT is communicated with a number of experienced grafted glue technology engineers. After design, the production line has high production efficiency and low production cost. It can realize semi-automatic or automatic control according to different customer requirements.
production line equipment
Reaction kettle, condenser, dispersing kettle, filter, filling machine, steam furnace, water cooling system, material pump, etc. Model | Chamber Volum(L) | Drive motor power (KW) | Mixing Speed (rpm) | Discharge mode | Heating |
Full volume | Feeding amount | Paddle fast / slow paddle | Optional parameters | Optional parameters |
NHZ-5 | 5 | 3 | 2.2-4 | 75/50 | Manual / Hydraulic tilting | Running Hot oil | Electrical heating | Pressure Steam |
NHZ-20 | 20 | 12 | 3-5.5 | 63/42 |
NHZ-50 | 50 | 30 | 4-7.5 | 63/42 |
NHZ-100 | 100 | 60 | 5.5-7.5 | 43/29 |
NHZ-200 | 200 | 120 | 7.5-15 | 43/29 | Hydraulic tilting | The bottom pumping | Screw extruding |
NHZ-300 | 300 | 180 | 11-18.5 | 43/29 |
NHZ-500 | 500 | 300 | 18.5-30 | 43/29 |
NHZ-1000 | 1000 | 600 | 22-55 | 32/22 |
NHZ-1500 | 1500 | 900 | 30-90 | 32/22 |
NHZ-2000 | 2000 | 1200 | 45-110 | 32/22 |
NHZ-3000 | 3000 | 1800 | 55-130 | 33/22 |
Remarks: 1,Temperature range: 0-300°, 2, Pressure range:-0.1-0.6MPa, 3,Inverter for frequency control if necessory. |
Production process
1).All kinds of raw materials are prepared according to the technical formula.
2)Add butanone, xylene and other solvents to the reaction kettle to stir and stir.
3)Add chloroprene rubber, continue heating heating, high speed;
4)After the rubber is dissolved, the other raw materials are added to heat up and react.
5)When the viscosity is detected and the requirements are reached, other raw materials are added.
6)Cool down the cooling water to the specified temperature.
7)Pump the finished product into the high speed dispersion kettle.
8)Other raw materials such as resin are added to adjust the viscosity and solid content.
9)After sampling and testing, the cooling is cooled and the material is packed
Complaint
