Plastic Washing Machine:
1. The plastic film washing line is widely is used to crush, wash, dewater, dry and recycle plastic films like agriculture film, bags, PP woven bags and so on.
2. With complete pp pe film washing line, clients can make dry, clean film scraps from wasted material.
3. The whole pp pe film washing line could be "L" or "U" shape according clients' workshop.
4. Low energy consumption, as well save the cost.
5. The last moisture of our produce can be 3%-5%.Normally drying system moisture is about 10%-15%.And at the same time,our drying system can save about 60KW for you compare with the original drying system.
The LDPE PP PE HDPE Film Washing Recycling Machine Processing:
1.Belt Conveyor 2.Wet Crusher 3.Screw Conveyor 4.Floating Washing Tank 5.Screw Conveyor 6.High Speed Friction Washer 7.Screw Conveyor 8.Dewatering Machine 9. 1st Drying System 10.Transition Silo 11. 2nd Drying System 12.Storager Silo 13.Electric Cabinet
Our Machine:
Detail Description:
Plastic Film Washing line is designed for process and wash waste plasttic thin film with contaminations.
New grinder rotor shape to crush film in higher capacity.
Film squeezer machine for ensure get a lower mosture.
Final film humidity in 3%-5%.
Easy operation with low consumption
| Type | RT300 | RT500 | RT1000 |
| Capacity(kg/h) | 300 | 500 | 1000 |
| Energy consumption(KWH) | 95 | 156 | 229 |
| Installation power(KWH) | 146 | 241 | 352 |
| Dimension: L*W*H(m) | Depends on factory layout | Depends on factory layout | Depends on factory layout |
| Belt conveyor | Belt width(mm) | 600 | 800 | 1200 |
| Motor power(KW) | 1.5 | 2.2 | 3 |
| Metal detector-Optional | Pass width(mm) | 800 | 1000 | 1200 |
| Pass height(mm) | 400 | 400 | 400 |
| Crusher | Grind chamber(mm) | 500*700 | 700*1000 | / |
| Motor power(KW) | 55 | 75 | / |
| Shredder | Grind chamber(mm) | / | / | / |
| Motor power(KW) | / | / | 75 |
| Screw conveyor | Screw diameter(mm) | 300 | 400 | 500 |
| Motor power(KW) | 3 | 4 | 5.5 |
| Washing tank | Dimension of tank(mm) | 4000×1400 | 5000×1600 | 7000×1800 |
| No. of thumb-wheel(pcs) | 4 | 6 | 7 |
| Discharge plate valve(pcs) | 2ports*2=4 | 3ports*2=6 | 4ports*2=8 |
| Friction washer | Screw diameter(mm) | 300 | 400 | 500 |
| Motor power(KW) | 11 | 18.5 | 30 |
| Squeezing dryer | Screw diameter(mm) | / | 320 | 410 |
| Motor power(KW) | / | 55 | 75 |
| Storage buffer | Storage capacity(CBM) | 3 | 4 | 6 |
| Motor power(KW) | 2.2 | 3 | 4 |
| Waste water filtration device-Optional | Vibration screen size | 800 | 1000 | 1200 |
| Screen mesh | 40 | 40 | 40 |
| Electrical cabinet | PLC controller | / | / | / |
| Button type | / | / | / |
| Man power(person/shift) | 3 | 3-4 | 3-4 |
| Delivery time(day) | 60-90 | 60-90 | 60-90 |
| Warranty(month) | 12months | 12months | 12months |
| Technical assistance | Egnineer available to service machinery overseas | gnineer available to service machinery overseas | gnineer available to service machinery overseas |
1.Crusher
(1)RETECH RT series crusher is applicable to woven bags, jumbo bags,films etc
(2)Using D2 blade which has longer service life than SKD-11 blade.
(3)Our crusher is designed to meet the production requirements of high capacity crushing and one-time crushing of large materials.
(4)Designed according to your raw materials
(5)Design the best cutting angle and the moost suitable cutting rate
(6)Wear resistant design, ensure continuous operation for a long time.
2.Floating Washing Tank
(1)Unique reverse discharge method and scientific wheel combination, uniform discharge, no blocking.
(2)Flat-type wheel blade design, plus efficient crushing of crusher,no long material is generated, no material entanglement.
(3)Bottom screw drainage design makes daily maintenance more convenient.
(4)The transmission device is externally equipped with a protective cover. The level of the tank body is raised, no water & material splashes, keep the factory clean.
(5)Can design floating washer for sinking & floating materials co-use to meet customer's multi-purpose needs and save investment.
3.High speed friction washer
(1)Special blade arrangement, uniform discharge, sufficient friction cleaning,high water utilization rate, effective removal of paper labels, and other impurities.
(2)Frame structure body, smaller vibration.
(3)Adopt high-speed heavy-duty bearings,stainless steel spindles,and blades,dynamically balanced.
4.De-watering Machine
(1)The integrated design of the dewatering machine and the fan, no need for a separate fan, which saves energy and enables smooth feeding and discahrging, no blocking.
(2)Adopt high-speed heavy-duty bearing, stainless steel spindles, and blades, dynamically balanced.
(3)Automatic screen cleaning device which is driven by air pressure, labor-saving.
(4)Adopt a container for collecting waster water &residue at the bottom.
5.Silo
(1) Easy to collect the final output material, can be customized to your use requirements, with hooks to hang the jumbo bag or other collection containers.
(2)Hydraulic cylinder design make full use of jumbo bag loading space.
(3)Each hook can bearing 500kg.
(4)Stainless steel inner to protect the final products quality.
6.Electrical Cabinet
(1)International brand Low voltage components
(2)Double circuit safety relay
(3)Intelligent and modular PLC controlling system
SEE RETECH MACHINE HOW TO ENSURE THE QUALITY!
1.In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
2.Each component before assembly needs strictly control by inspecting personnel.
3.Each assembly is in charged by a master who has working experience for more than 20 years
4.After all the equipment are completed, we will connect all the machines and run the full production line to ensure the stable running in customers' factory.
THE AFTER-SALE SERVICE OF RETECH MACHINE!
1.After finish the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools.
2.After the commissioning, we will package the equipment by standard export package for shipment.
3.According to the customer's request, we can arrange our engineers to customers' factory to do the installation and training.
4.Engineers, sales managers and after-sales service manager will form a after-sales team, online and off line, to follow the customers' project.
Complaint
