Medical regulator is used for oxygen breathing in hospital
1.Mainly component name ( Please see overleaf )
2.Mainly function:
Oxygen flow range : 1-10L / Min I-15L / Min
Pressure reducing range : 2.0~3.0kg
Relief valve Pressure range : ( 3 . 5kg±0 . 5kg)
3 . Appliance introduction
Before using , please fill pour clear water into moisture bottle about one third reaching water line site
DF-2 blind nut straw into bolt head , make the pipe of flow meter square water line.
Put off regulator ( 9 ) , put on oxygen tube switch , so you will the data from needle position of pressure gauge ( 2 ) .At last , straw flow on / off at anti -clockwise according to patients need , adjust switch.
If Patient need oxygen for a long time , can nse nose pipe to help patient absorb oxygen .
Moisture bottle ( 20 ) circles at clockwise , adjust ( 17 ) oxygen hole to other site.
4.Attention point
Before using the suction , you will check all parts bad or good and clean it by drying cloth.
Pressure gauge ( 2 ) , regulator ( 3 ) no oil , otherwise explode.
Clearwater in moisture bottle keeps clean.
There is adjustable nut ( 6 ) in the front of plunder shall be straw at clockwise.
Relief value ( 7 ) ( 15 ) keeps out of danger.
Oxygen dosage is decided by doctor.
After using suction , put off the oxygen tube switch , make rest oxygen out ,pressure gage to zero site , last put off flow switch if using again , first put on the oxygen tube switch , avoid exploding.
The product must be examined periodical , at least once every 6 month.
5.If you don't understand , please contact to us.
Complaint
