Features
* Cost-Effective.
* Chip from international famous brand, temperature compensation.
* Gauge, sealed gauge, and absolute.
* Pressure range: 0kPa~35kPa…35MPa...100Mpa.
* Constant Current / Constant Voltage power supply.
* Isolated construction, enable to measure of various fluid media.
* Φ19mm standard OEM piezo-resistive pressure sensor.
* Full stainless steel 316L.
Application
* Industrial process control·Level measurement ·Gas, liquid pressure measurement
* Pressure checking meter·Pressure calibrator ·Liquid pressure system and switch
* Cooling equipment and air conditioning system·Aviation and navigation inspection
Introduction
XYT-19 10 Bar Piezoresistive Diffused Silicon Pressure Sensor is manufactured in an automatic mass production line. It is cost-effective. XYT-19 outline, installation, dimension, and sealing methods are similar to mainstream sensors of international famous brand They have high interchangeability. XYT-19 is widely used for pressure measurement of media which is compatible with
stainless steel and Viton.
Electric Performance
Power supply: ≤2.0mA DC; ≤10V DC
Electric connection: 100mm silicon rubber flexible wires
Common mode voltage output: 50% input (typ.)
Input impedance: 2kΩ~8kΩ
Output impedance: 3.5kΩ~6kΩ
Response (10%~90%): <1ms
Insulation resistor: 100MΩ, 100VDC
Overpressure: 1.5 times FS
Construction Performance
Diaphragm: stainless steel 316L
Housing: stainless steel 316L
Pressure leading tube: stainless steel 316L
Leading wire: silicone-rubber flexible wire
O-ring: Viton
Net weight: ~35g
Environment Condition
Shock: no change at 10gRMS,(20~2000)Hz
Impact: 100g,11ms
Media compatibility: the gas or liquid which is compatible with stainless steel and viton
Basic Condition
Media temperature: (35±1)ºC
Environment temperature: (35±1)ºC
Shock: 0.1g(1m/s2)Max
Humidity: (50%±10%)RH
Local air pressure: (86~106)kPa
Power supply: (1.5±0.0015)mA DC
Complaint
