Complaint
240 cuttings Cloning Cart
Our mission is to produce new technologies for growing plants and educate the world on how to restore sustainable growing practices.
Product Description
Cloning Cart is the perfect vertical system for compliant plant cutting production. Our grow cart can help simplify your cloning and seedling stage, while increasing your success rate. By growing your plant clones and seedlings vertically, you will save valuable floor space in your plant production facility. Space that can be better used for flowering plants and increased crop turnover. Vertical clone cart provides three levels for growth.
The ways to cultivate:
1) Dip cutting in a rooting compound. Rooting Compound is what we recommend. It should be applied directly to the cutting's stem prior to placing the cutting in the system.
2) Place cutting in the center of the circular cloning collar, making sure that at least 1 ½ to 2 inches of the cutting is suspended beneath the lid. All leaves should remain on the top of the lid.
3) Insert the cloning collars, each filled with a cutting, into the lid. Make sure they are fitted securely to prevent leakage.
4) Set the lid onto the reservoir making sure that the lid is securely seated
Full feature list
*Cloning site-240 cuttings
*Total power consumption-500 watts
*Physical Dimensions - L 740 x D650 x H2000 mm powder coated steel
*Frame (designed to roll through any standard size door).
*The system takes up less than 10 square feet of space.
*Heavy-duty rollers, easy to move. Each shelf has its own sliding drawer, and the chips can be easily obtained when the drawer is opened.
*A single waterproof box puts all components in one place.
*Only use 1 standard 120V power cord.
*Customized 19-gallon water tank with molded handle. Include drainage pipes on the long and short sides of the reservoir.
*The 30-micron water filter can be easily replaced by hand.
*The outboard water pump has a separate motor and pump head.
*The motor uses 2.5 amps/300 watts. The factory pressure is set to 75 PSI.
*The high-pressure oil pipe is tightly attached and safely routed in the frame guide rail. All accessories are leak-proof and quick disconnect.
*The custom atomizer head is fixed at the bottom of each trap tray, and generates 65 micron droplets at a pressure of 75 PSI, and the power is -300W. The atomizer is easy to disassemble and can be used for inspection and cleaning needs.
*Each layer of the system contains 4 LED T8 tubes with a single power of 15W and a color temperature of 6500K.
*Each layer of light has its own On/Off switch.
*The frame is equipped with two timers, one timer for the water pump to customize your on/off cycle, and the other to control your lighting cycle (the pump timer is set to 1 minute on / 4 minutes off at the factory) .
*Total system power consumption for 1 minute on / 4 minutes off cycle
(4.8 hours per day @ 4.17 amps-500 watts), based on
*Calculated at the rate of kilowatts/hour, the daily usage cost is estimated to be 0.82 US dollars/day.
Product data
Model | SL2020-A4 |
Product size | 1100(L)*650(W)*2000mm(H) |
Working voltage | 110VAC |
Working frequency | 50-60Hz |
Power | 500W |
Number of cultivable seedlings | 240 holes: 80*3=240 holes |
LED wavelength range | 380-800NM (customizable) |
With automatic and nutrient solution replenishment circulation system, the timing is not limited (the duration can be set by yourself) Base with universal wheel | |
Product detail
Product serise
