Complaint
Product features
1. Metal powder box, safety first;
The powder box and the lid are made of aluminum alloy integrated molding process, which enhances the safety protection to the extreme;
2. Backstop device to protect the dental chair;
A sand powder anti-backflow device has been added to the machine body to effectively protect the cleaning and sanitation of the dental chair tube;
3. Powder filtration, not easy to block the gun;
The sand blasting machine is equipped with a powder filtration system, which can completely prevent the sand caused by the moisture and oil generated in the air compressor.
Powder agglomeration affects the smoothness of sand blasting;
4. Water and gas separation, one button drying;
The sand powder and the water supply are not connected to the pipe, so that the sandblasting is more uniform and the water is more powerful; at the same time, the drainage and gas buttons are installed.
It avoids the situation that the sand blasting machine is not activated for a short time and the sand powder is agglomerated;
5. The handle can be removed and the teeth can be quickly cleaned.
The handle, pipeline and body can be split and easy to assemble, making it easier for the handle to be autoclaved anytime and anywhere, making the teeth more comfortable and more efficient.
Special Note:
1. The loading amount of sand powder shall not be higher than the warning line in the powder box, too much sand powder may cause blockage of the gun nozzle;
2. Immediately after each use, close the main switch of the sandblasting scale and the water switch. If there is any powder, please do not pour it out for a short time, and gently press the foot switch on the treatment table to make it idling for better cleaning. Sand powder pipeline;
3. It is forbidden to open the dust cover during operation. If sand powder needs to be added, it should be done with the main switch of the sandblasting machine closed.
4. If the tip of the gun is clogged, please use the supplied needle to clear it. If it still can't be dredged, please remove the gun head and put it in boiling water for 10 minutes, then install it, and gently step on the pedal when the water and gas are off. The switch makes it idling to clear;
5. Regularly discharge the water vapor in the air compressor (there is a drain valve under the tank, and the water can be discharged when twisted), which is more conducive to the smooth sandblasting of the sandblasting and cleaning machine.
FAQ:
1.Q: What is your best product?
A: We produce handpieces with stainless steel materials and ceramic bearings.High Precision ensure the quality to be a high level.
2.Q: How long can you send orders?
A: It depends on your order quantity.If samll quantity we can send within one week.Other situation such as 3000 pcs need one month.
3.Q: What certificates do you have?
A: We have ISO 13485:2016 and CE for our products which aprroved by Europe.
4.Q: Can you make customer's logo for the products?
A: Yes sure we can make any legal logo for you.
5.Q: What is minimum order?
A: To bring a chance of starting business.we don't set a minimun quantity.
