Complaint
| 1600 | 3400 | 1.Power cord |
| Voltage(V) : 42 100 120 200 230 For 50/60Hz | Voltage(V) : 200 230 For 50/60Hz | 2.Main switch 3.Screw on the clamp |
| Power consumption(W) :960 1400 1600 | Power consumption(W) :3400 | 4.Potentionmeter for temperature adjustment |
| Weight (kg) : 1.2 with 3m cord | Weight (kg) : 1.4 with 3m cord | 5.Handle & Nozzle |
| Temerature : 20-700 degrees Celsius,infinitely controlled | 6.Air fillter | |
| Air flow (1/min) :max.230 | 7.Rubber stand | |
| Air pressure (pa) :3000 (30mbar)after about 24 h operating time | 8.Adapter tube | |
| Size (mm):customized | 9.Heat protection tube | |
| Hot air welder | ||||
| Temperature controll | We use photocell to controll temperature inside. | |||
| Temperature switch | Outside of the gun there is temperature switch. And once the plastic body is above 135 degree,the whole circuit will be cut off. | |||
| Plastic material | At present,this plastic is one can resist the highest temperature. It can resist 280 degree. | |||
| Bearing | We use high temperature bearing manufactured in Japan. | |||
| Ceramic heating element | We use Swedish heating wire for ceramic heating element inside the hot air gun. And ceramic material is also good quality. It can resist high temperature 1650C. | |||
| Model | ZGF-1600S | ZGF-1600SD | DG-1600S |
| Related Voltage | 230V /120V | 230V /120V | 230V /120V |
| temperature display | No | No | Yes |
| Related Power | 1600W | 1600W | 1600W |
| Frequence | 50/60Hz | 50/60Hz | 50/60Hz |
| Temperature | 20-700 degree | 20-700 degree | 50-750 degree |
| Air flow | Max 180L/min | Max 180L/min | Max 180L/min |
| Auto cooling fuction | No | Yes | Yes |
| Product qualification | CE RHOS | CE RHOS | CE ROHS |
| Protection class | Double insulated | Double insulated | Double insulated |
| Air blower Net weight | 0.85 KGS | 0.85 KGS | 0.85KGS |
| Mini heat gun Net weight | 0.5KGS | 0.5KGS | 0.5KGS |
| Air horse | 0.5-2 meters according to your request | ||
| Remarks: For the ZGF-1600SD and DG-1600S (after finish job,you don't need to adjust the potentionmeter to "o" position. You can turn off the power switch directly,now the welder stops heating but the air blower still blow for 3.5 miuntes to cool down the welder and then power off automatically. ) | |||
