Complaint
1.Special structure design ensures all round protection without dead zone;
2.Optical communication is easy for the electric connection and operation
3.Dual-channel OSSD output design, which can be cross-monitored with each other
4.Self-diagnostic function can check the fault circuit and give alarm;
5.Interlocking reset, external test and EDM function enhance output monitoring capability;
6.Meet to Type4,SIL3 and Ple safety requirement;
| Technical Parameters | |
| Light Curtain | LSA |
| Supply voltage | 24 VDC±20% |
| Supply Current | ≤300mA |
| Consumption | ≤5W |
| Delay on | 2s |
| Detection distance | As Mode information |
Space between optical axis | 10mm\20mm\40mm\80mm |
| Effective aperture | ±2.5°@3m |
| Protection rate | IEC IP65 |
| Communication mode | Optical synchronous |
Standard | IEC 61496 standard,meet to Type4 |
| ISO 13849-1 standard,meet to PLe | |
| IEC 61508,IEC62061,meet to SIL3 | |
| Work environment | Temperature: -25ºC~50ºC; Storage: -40ºC~75ºC; Humidity: 15~95%RH; Anti-light interference: >10000Lux; Vibration resistance: 5g, 10~55Hz(EN 60068-2-6); Impact resistance: 10g, 16ms(EN 60068-2-29); insulation resistance: >100MΩ; Residual ripple voltage: 4.8Vpp; |
| Connector | M12,6 pins(Emitter),8 pins(Receiver) |
| Emitter & Receiver Parameters | ||
| Emitter light | Infrared light 850nm | |
Output Mode | Emitter | Alarm output,transistor PNP/NPN for selecting; output current<150mA(30V DC) |
| Receiver | 2 OSSD output,PNP NC ,short-circuit protection,Cross circuit monitoring,output current <200mA(30V DC) | |
| Indicator | See indicator instruction | |
| Response time | 3.2~51.2ms(on product model basis) | |
| Switch voltage | Voltage drop:≤1.5V; cutoff voltage: ≤1.2V | |
| OSSD Test | Pulse width:200~300ms pulse cycle:50~100ms | |
| Load | capacitance:30nF, inductance:2.2H | |
| Resistance | Device and load resistance:2.5Ω Power cable resistance: ≤10Ω | |
| TEST input | Active high * | |
| RESET input | Active high* (manual reset or automatic reset) | |
| EDMSE input | Active high * | |
| EDM input | 10~30V DC,current<10mA | |
| LSA10 series | ||||||
| Model | Detection distance(m) | Resolution ratio (mm) | Light beams quantity | Safe height (mm) | Response time( m s) | Product Length(mm) |
| LSA10032 | 0.5~6m | 15mm | 32 | 320 | 9.1 | 325 |
| LSA10048 | 48 | 480 | 13.4 | 485 | ||
| LSA10064 | 64 | 640 | 17.6 | 645 | ||
| LSA10080 | 80 | 800 | 21.8 | 805 | ||
| LSA10096 | 96 | 960 | 26.0 | 965 | ||
| LSA10112 | 112 | 1120 | 30.2 | 1125 | ||
| LSA10128 | 128 | 1280 | 34.4 | 1285 | ||
| LSA10144 | 144 | 1440 | 38.6 | 1445 | ||
| LSA10160 | 160 | 1600 | 42.8 | 1605 | ||
| LSA10176 | 176 | 1760 | 47.0 | 1765 | ||
| LSA10192 | 192 | 1920 | 51.2 | 1925 | ||
| LSA20 series | ||||||
| Model | Detection Distance(m) | Resolution ratio (mm) | Light beams quantity | Safe height (mm) | Response time( m s) | Product Length(mm) |
| LSA20016 | 0.5~8m | 26mm | 16 | 320 | 5.1 | 325 |
| LSA20024 | 24 | 480 | 7.1 | 485 | ||
| LSA20032 | 32 | 640 | 9.1 | 645 | ||
| LSA20040 | 40 | 800 | 11.3 | 805 | ||
| LSA20048 | 48 | 960 | 13.4 | 965 | ||
| LSA20056 | 56 | 1120 | 15.5 | 1125 | ||
| LSA20064 | 64 | 1280 | 17.6 | 1285 | ||
| LSA20072 | 72 | 1440 | 19.7 | 1445 | ||
| LSA20080 | 80 | 1600 | 21.8 | 1605 | ||
| LSA20088 | 88 | 1760 | 23.9 | 1765 | ||
| LSA20096 | 96 | 1920 | 26.0 | 1925 | ||
| LSA40 series | ||||||
| Model | Detection distance(m) | Resolution ratio (mm) | Light beams quantity | Safe height (mm) | Response time( m s) | Product Length(mm) |
| LSA40008 | 0.5~8m | 46mm | 8 | 320 | 3.2 | 325 |
| LSA40012 | 12 | 480 | 4.2 | 485 | ||
| LSA40016 | 16 | 640 | 5.1 | 645 | ||
| LSA40020 | 20 | 800 | 6.1 | 805 | ||
| LSA40024 | 24 | 960 | 7.1 | 965 | ||
| LSA40028 | 28 | 1120 | 8.1 | 1125 | ||
| LSA40032 | 32 | 1280 | 9.1 | 1285 | ||
| LSA40036 | 36 | 1440 | 10.2 | 1445 | ||
| LSA40040 | 40 | 1600 | 11.3 | 1605 | ||
| LSA40044 | 44 | 1760 | 12.3 | 1765 | ||
| LSA40048 | 48 | 1920 | 13.4 | 1925 | ||
| LSA80 series | ||||||
| Model | Detection distance(m) | Resolution ratio (mm) | Light beams quantity | Safe Height(mm) | Response time( m s) | Product Length(mm) |
| LSA80008 | 0.5~8m | 86mm | 8 | 640 | 3.6 | 645 |
| LSA80010 | 10 | 800 | 4.2 | 805 | ||
| LSA80012 | 12 | 960 | 4.8 | 965 | ||
| LSA80014 | 14 | 1120 | 5.4 | 1125 | ||
| LSA80016 | 16 | 1280 | 6.1 | 1285 | ||
| LSA80018 | 18 | 1440 | 6.8 | 1445 | ||
| LSA80020 | 20 | 1600 | 7.5 | 1605 | ||
| LSA80022 | 22 | 1760 | 8.1 | 1765 | ||
| LSA80024 | 24 | 1920 | 8.8 | 1925 | ||
Q: What kind of products do you manufacture?
A: Our products includes photocell sensor, proximity switch, infrared light curtain, Vehicle separator, Loop detector and laser radar.,etc.
Q: Can I get some samples?
A: Yes, Sample orders are welcomed.
Q: Have photocell sensors 100% assembled well in stock?
A: We have some standard photocell sensors in stock with limited quantity; While
almost all photocell sensors will be newly produced according to your order.
Q: What is the delivery time?
A: 15-30 days for mass production depends on different products
Q: What is your MOQ?
A: We provide small MOQ for each item; it depends on your specific order.
Q: Do you have customization service?
A: Yes, We can provide customized products while the customization needs to meet certain quantity.
Q: Do you test all goods before delivery?
A: Yes, We have 100% test before delivery.
Q: What is your payment term?
A: We usually use 100% T/T in advance; West union and Paypal are also available for small order.
11
Q: Do you provide warranty for the goods?
A: Yes, We provide warranty for all the goods from us. For the sensor product the warranty is 15 months, For the light curtain , laser radar product the warranty is 18 months.
Q: May I visit your factory?
A: Sure, You are always welcome to visit us.
