Complaint
| 1) Crane main engine | 2) Water pump main engine sealing ring |
| 3) 2 inch water inlet pipe for 1 pc | 4) 1 rotary pneumatic valve short rod |
| 5) 4-point throat hoop for 2 pc | 6) Water return pipe for 1 pc |
| 7) One crown block cover and 1 pc electric control box | 8) Rocker arm with shield |
| 9) Rocker arm hoop for 2 pcs | 10) One right angle iron for 1 p |
| 11) pieces of 100 channel steel | 12) 4 pcs of u-wires |
| 13) Site cleaning and shield | 14) 2 pcas of fixing pieces |
The limit iron is 2 pcs of long and 15 pcs of short | 4 sets of crown block fasteners (12 pieces) |
12 sets of shelf fasteners (24 pieces) | 4 pcs Foundation iron |
2 sets of fastener for vertical pole | One inch galvanized pipe 3m*3, 2.5m*1,1.2m*1 500mm*2 |
One inch pipe fitting, 12 pipe hoops, 10 ball head sealing rings | High pressure hydraulic pipe 1m*3,2m*2, 5 ball heads, 16 tubes 20m, 8mm tubes 50m |
12*120 screws 115 pcs, 12*90 screws 18 pcs | 10*10 expansion screws 22pcs, 1 proximity switch (standby) |
Expansion screw in construction site for 10 pcs | 1 bag of ribbon, 5 rolls of raw material belt, some hemp rope, 1 red and green indicator light (with accessories) |
There are 2 pairs of photoelectric switches, 4 ps photoelectric supports, 8 pcs 30o rings and 1 roll of electrical tape | 2-core shielded wire 20m, 6-core 0.75 wire 20m, 8-core 0.75 wire 20m |
Three core 0.75 wire 60m (single 20m), two core 0.75 wire 15m | Water pump control line 4-core 15m |
There are 8 screws with 15 sets of nut + flat pad + spring pad, and 6 screws with 15 sets of nut + flat pad + spring pad | Water pump motor cable 15 meters 4 square, 5 screws and nuts + flat pad + spring pad with 15 sets |
Foam barrel 1, car wash agent 2 bags. | |
Part III: Datas of P10 Car Wash Equipment
| Material | Stainless steel | Foam system | 1 set |
| Water consumption | 80-120L | Chassis side spray | 1 set |
| High Pressure Pump | 7.5kw | Control mode | Touch screen operation |
| Car wash size | 530*190*200cm | Car washing method | Cantilever 360 degree encircling type |
| Body sensing | ultrasonic | Car wash time | 3 minutes |
| Fault self check | Automatic alarm | Storage capacity | More then 1t |
| Water supply | Pipeline with more than 6 points | Pressure | 60-80kg |
| Air pump power | More than 700w | main controller | Schneider, Chint |
| Induction mode | Ultrasonic induction, electro-optic induction, proximity induction | Foam power | 370w |
| Operation mode | Manual, automatic and continuous automatic | Protection system | Over voltage protection, over current protection |
| Car washing process | Chassis + foam + rinse | Color touch screen | 1 set |
