System Components Used for Rigid PU Foam Raw Material Used for Imitation Wood

Min.Order: 1

Product origin: Yantai, Shandong, China

Infringement complaint:

Complaint

US$ 1500 ~ 3500

Description

BLEND POLYOL SD2702
RIGID PU FOAM FOR IMITATION WOOD
PRODUCT INTRODUCTION
SD2702 is suitable for the usage of high density rigid PU foam, which can be used for the field of imitation wood, blocks and so on. When it combined with isocyanate(PM-200) leads to the formation of rigid polyurethane foam by using PU injection machine or handwork. The foam formed has the characteristics as following:

Low quantity, high strength of the products
It is suitable for the complex mold.

TYPICAL PHYSICAL PROPERTIES

Performance	Test Standard	Unit	Index
Core Density	Gb/T 6343-2009	Kg/M3	70-600

COMPONENT PRODUCT SPECIFICATIONS

Property	Blend Polyol	Polymeric MDI
Product Name	SD2702	PM200
Appearance	Pale yellow liquid.	Brown liquid
Density at 25°C	1.10±0.10 g/cm³	1.22-1.25 g/cm³
Viscosity at 25°C	500-1000 cps	200±50 cps
Shelf Life	12 months	12 months

REACTIVITY PROFILE

Cream Time	Gel Time	Tack Free Time	Free Rise Density
30-60 s	160-200s	300-500 s	40-500kg/m³

PACKING SPECIFICATION
220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)

STORAGE RECOMMENDATIONS:
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature is 15~25ºC.

SAFETY PRECAUTIONS:
Direct contact with SD2702 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.

Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.

Forward

Related products