Extruding Pressure Inspection Machine in Canning Line Can Drinks

Min.Order: 1
Product origin: Suqian, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 27500 ~ 28750

Description
Equipment introduction
The equipment is a full automatic multi-function detection system equipment. Using extrusion online detection method, the can body to be detected is extruded by bilateral belts, it is used to detect. the pressure value in the can after the secondary sterilization. The stable capacity is 72,000CPH.


Equipment principle
In the process of can beverage packaging, due to the influence of the stability of production equipment and personnel operation level, there are different packaging quality defects in each packaging link of the production line, which will lead to a variety of unqualified products, thus affecting the quality of products. It specifically includes the following situations:
NO.Quality DefectsExistence RiskCause
1Block is laxMaterial leakedCapping machine problem
2Cap brokenMaterial leakedCap problem

If the pressure inside the cans is too high, too low or bad sealing, it will decrease after the secondary sterilization. The lid of the cans is out of shape and can't recover. It is hard for the conventional non-contact inspector to detect, we can only use the contact method to detect the unqualified ones.Extruding pressure inspector use the extruding and contacting pressure sensor technology.When the can reaches the inspector, the bilateral belt will extrude the can, the pressure sensor send the value to the control center, after analyzed to the value, the control center sends instruction to the rejecting device to reject the ones which are with higher or lower pressure.
The inspecting system consists of HMI, pressure inspecting device and rejecting device. The pressure inspecting device is the core element. HMl includes the touch screen, tower light, operation interface. The rejector is the actuator of the system to reject the unqualified ones.


Technical parameter
Dimension 948*867*2200mm(L*W*H )Temperature0ºC~45ºC
Air consumption of rejector≤0.01 L/timeExternal air source>0.6Mpa
Power0.5kwExternal air source flow>500 L/min
Capacity 72000CPHAltitude<3000m
VoltageAC380V/3P  
Structure characteristic
  1. Contact type inspecting
  2. Chinese and English language menu
  3. Color HMI
  4. IP65 cabinet
  5. Alarm for continuous rejecting
  6. Data save for kinds of rejecting
  7. Digital signal treatment
  8. Accurate strike timing encoder
  9. Alarm data
  10. Net remote control (optional)
Pressure inspecting range
Detection itemDetection accuracyDetection rangeRejection rateMis-rejection rate
Detection value±0.02Mpa0.06Mpa≤X≤0.50Mpa≥99.9%≤0.3%
Product Tag:
Related categories:
Scroll to Top