Description
The machine integrating blister, feeding, detection, rejection into an organic whole, which with compact structure, simple operation and PLC touch screen adopted. Change parts can special designed by customer's requirements.
II. Characteristic:
1, TJ260T1 Blister Packing Machine could fission pack to enter lift and division cleaning workshop, adopt column pin location, bolt-fixation, easy to serial production.
2, The die locate day location pin with precision, and press-board dress up.
3, Main motor adopt frequency control: (punch frequency is 60 times/min). It can enact corresponding punch frequency according to travel and fulled feeding easy or hard factor.
4, Adopt engine-hand nip draw station, running steadily, synchronization nicety, change travel and design the plate size at will on the range of 40-120mm.
5, Forming and heating plate close and open automatically, it could protract time to boot-strap after put down heating plate, limit wasting material less than one edition.
6, Air bed sealing, net-plate is hoisted by cylinder while stop. Avoid making blister metamorphose by heat radialization while settling, easy to clean the net-plate also, at the same time,play the role of buffer when over-pressure, is propitious to prolong machine usage life.
7, Up-lower net-plate male and female work in heat-sealing, there are punctuate net-veins on the positive and negative(could line-pressurize also). Because two side stress are equality, make plate more level-up, improve pressurize capability as well.
8, Alarm and stop while PVC is out and discerption, easy to replace and add PVC on time for work man.
9, All hardware and container are contact with medicament, adopt stainless steel and innocuity produce, accord with "GMP" request.
III. Main Technical Parameters:Intelligent plate type AL/PL,AL/AL Blister Packing Machine
| Data | Serial No. |
| Overall Dimension | 4420x710x1700 |
| Weight | 2200Kg |
DPP260TI Main Technical Parameters
| Item | Data | Unit |
| Cutting Speed | 20-40(AL/AL) | Times/min |
| 20-60(AL/PVC) | Times/min |
| Range Of Working Travel | 30-120 | mm |
| Max.Forming Area | 260×115 | mm×mm |
| Max.Forming Depth | 10(AL/AL) | mm |
| 18(AL/PVC) | mm |
| Motor Power | 1.5 | Kw |
| Main Source Power | 9.5 | Kw |
| Power Supply | 380/50 | V/Hz |
| Air Pump | Volume Flux | ≥0.4 | m³/min |
| Rating Exhaust Pressure | ≥0.5 | Mpa |
| Packing Material | PVC | 0.25×260 | mm×mm |
| AL For Sealing | 0.02×260 | mm×mm |
| AL For Forming | 0.15×260 | mm×mm |
Complaint
